Influence of Hydrophobicity on Excitonic Coupling in DNA-Templated Indolenine Squaraine Dye Aggregates
Not Available
Engineering topics
Publications and source records attributed to Li, Lan.
Not Available
Nuclear Thermocouples Project Summary
The presence and stability of solid electrolyte interphase (SEI) on graphitic electrodes is vital to the performance of lithium-ion batteries (LIBs). However, the formation and evolution of SEI remain the least understood area in LIBs due to its dynamic nature, complexity in chemical composition, heterogeneity in morphology, as well as lack of reliable in situ/operando techniques for accurate characterization. In addition, chemical composition and morphology of SEI are not only affected by the choice of electrolyte, but also by the nature of the electrode surface. While introduction of defects into graphitic electrodes has promoted their electrochemical properties, how such structural defects influence SEI formation and evolution remains an open question. In this work, utilizing nondestructive operando electrochemical atomic force microscopy (EChem-AFM) the dynamic SEI formation and evolution on a pair of representative graphitic materials with and without defects, namely, highly oriented pyrolytic and disordered graphite electrodes, are systematically monitored and compared. Complementary to the characterization of SEI topographical and mechanical changes during electrochemical cycling by EChem-AFM, chemical analysis and theoretical calculations are conducted to provide mechanistic insights underlying SEI formation and evolution. The results provide guidance to engineer functional SEIs through design of carbon materials with defects for LIBs and beyond.
Here, plane-wave density functional theory has been used to study oxygen adsorption on graphene, graphite, and (12,0) zigzag single-walled carbon nanotubes with and without Stone–Wales (SW) and single-vacancy (SV) defects to understand the role of defects on carbonaceous material reactivity. Atomic oxygen adsorption leads to the formation of an epoxide on defect-free graphene and graphite and an ether on the exterior wall of carbon nanotubes and SW-defected materials. O 2 chemisorption is endothermic on defect-free graphene and graphite and slightly exothermic on defect-free nanotubes. O 2 chemisorption energies are predicted to be –1.1 to –1.4 eV on an SW defect and –6.0 to –8.0 eV on an SV defect. An SW defect lowers the energy barriers by 0.90 and 0.50 eV for O 2 chemisorption on graphene and nanotubes, respectively. The formation of a C–O–O–C group is important for O 2 dissociation on defect-free and SW-defected materials. The energy barrier is less than 0.30 eV on an SV defect. The more reactive SW defect toward O adsorption on graphene is mostly due to the strained defective carbon atoms being able to donate more electrons to an O to form an ether. The larger 2s character in the hybrid orbitals in an ether than in an epoxide makes the ether C–O bond stronger. Stronger C–O binding on an SW-defective carbon nanotube than on a defect-free nanotube is in part due to more flexibility of the defect to release the epoxide ring strain to form an ether.
Squaraine dyes are candidates for DNA-templated excitonic interactions. This work presents substituent effects on the electronic and photophysicalproperties of squaraine dyes and a correlation between empirical Hammettconstant and those properties.
Not Available
Using the CO disproportionation (Boudouard) reaction as a probe reaction, an in-depth analysis of temperature-programmed pulse response data shows that the addition of Pt to Mo2C mitigates deactivation of Mo active sites by acting as a carbon collector. CO2 production on Mo2C and Pt/Mo2C materials is dependent on both the activation energy and the CO surface concentration. Detailed plane-wave density functional theory calculations of the CO adsorption and disproportion reactions on Mo2C-supported Pt nanoparticles (NPs) are reported. The Mo2C was modeled by the ß-Mo2C (100) surface, and the Pt/Mo2C interface was modeled by the addition of 12 Pt atoms to the Mo2C (100) surface (12Pt@Mo2C). The potential energy surfaces of the Boudouard reaction were calculated on pure Mo2C, 12Pt@Mo2C, and Pt (111) surfaces. CO dissociation readily occurs on the Mo2C (100) surface, but not on the Pt (111) surface, with the former being exothermic and the latter being endothermic. At the Pt/Mo2C interface, CO dissociation is still exothermic, but with a larger energy barrier. The Boudouard reaction takes place on the Mo2C region, where CO2 is formed from a surface O atom dissociated from one CO molecule in reaction with another CO molecule, leaving one C atom on the surface. C adsorption is preferential on the Pt site in comparison to the Mo site. The supported Pt domains can collect the remaining C atoms, facilitating further CO2 formation on the active Mo sites. A Bader charge analysis shows that the surface metal-carbon bond is a mixture of covalent and ionic bonds, whereas the surface metal-oxygen bond is ionic. Electron localization function (ELF) and partial charge density calculations agree well with the Bader charge analysis. These computational results are consistent with experimental observations of the interaction of CO with Mo2C nanotube supported Pt domains in the transient regime under far from equilibrium conditions. The Boudouard reaction is an important side reaction, and the unexpected role found for Pt as a carbon collector, with Mo serving as a disproportionation site, provides a unique vantage point for understanding carbon and coke formation on catalytic materials.
Abstract not provided
Based on the experimentally determined framework structure of porous MnO 2 octahedral molecular sieve (OMS)-5, we used density functional theory-based calculations to evaluate the effect of Na + cation on pore dimensionality and structural stability, and the interaction between CO 2 and OMS-5. Furthermore, we quantified the formation energy of one CO 2 /unit tunnel and two CO 2 /unit tunnel, and projected the electronic density of states on the OMS-5 framework, CO 2 molecules, and Na+ cations to reveal their individual contributions and bonding nature. Partial charge densities were also calculated to investigate CO 2 adsorption behavior in the OMS-5. Our studies predict the initial stage and driving force for the adsorption of CO 2 in the OMS-5, guiding the OMS material design for carbon capture and storage applications.
Abstract A novel micro‐scale photovoltaic concept, Wafer Integrated Micro‐scale Photovoltaics (WPV), is proposed, analyzed, and experimentally demonstrated. The WPV concept seamlessly integrates multijunction micro‐cells with a multi‐functional silicon platform that simultaneously provides optical concentration, hybrid PV/CPV architecture, and mechanical alignment features. Fabrication and optical performance characterization of the Si platform are described in this paper. Over 100% improvement in the concentration‐acceptance‐angle product ( CAP ) is demonstrated using the wafer‐embedded micro‐concentrating elements, leading to significantly reduced module material and fabrication costs, sufficient angular tolerance for low‐cost trackers, and an ultra‐compact optical architecture compatible with commercial flat panel infrastructures. The development of a prototypical module with a 400× concentration ratio is described. Outdoor optical characterization of the module shows acceptance angles of ±1.7° and ±2.5° for 90% of on‐axis power and full‐width‐half‐maximum, respectively. The projected performance of the PV/CPV hybrid architecture illustrates its potential for cost‐effective collection of both direct and diffuse sunlight, thereby extending the geographic and market domains for cost‐effective PV system deployment. Leveraging low‐cost micro‐fabrication and high‐level integration techniques, the WPV approach presents a promising route to combine the high performance of multijunction solar cells and the low costs of flat‐plate Si PV systems.
The monoclinic (Ni(L)[Ni(CN) 4 ] (L= 1,4-Bis(4-pyridyl) benzene) compound (defined as Ni-dpbz) is a flexible metal organic framework which assumes a pillared structure with layers defined by 2D Ni[Ni(CN) 4 ] n nets and dpbz ligands as pillars. The structure features an entrapped dpbz ligand that links between the open ends of four-fold Ni sites from two neighboring chains. This arrangement results in an unusual 5-fold pseudo square-pyramid environment for Ni and a significantly long Ni-N distance of 2.369(4) Å. Herein, using Density Functional Theory calculations, the different bonding characteristics between the 5-fold and 6-fold Ni's were determined. We found that there is weak covalent bonding between the 5-fold Ni and N in the entrapped ligand, and the 6-fold Ni-N bonds provide effective electronic conduction. The disordered dimethyl sulfoxide (DMSO) solvent molecules are not bonded to the framework. The material has a single pore with a diameter of 4.1 Å. This pore includes approximately 55% of the total free volume (based on a zero-diameter probe). The accessible pore surface area and pore volume were calculated to be 507 m 2 /g and 6.99 cm 3 /kg, respectively. The maximum amount of CO 2 that can be accommodated in the pores after DMSO is removed was found to be 204 mg/g, agreeing with the results of adsorption/desorption experiments of about 220 mg/g.
The design, fabrication and performance of InGaAs and InGaP/GaAs microcells are presented. These cells are integrated with a Si wafer providing a path for insertion in hybrid concentrated photovoltaic modules. Comparisons are made between bonded cells and cells fabricated on their native wafer. The bonded cells showed no evidence of degradation in spite of the integration process which involved significant processing including the removal of the III-V substrate. Results from a number of hybrid cell configurations were reported. These cells employed integration techniques including wafer level bonding of processed cells and solder bonding of the cells. Lastly, the cells themselves showed evidence of degradation in spite of the integration process, which involved significant processing including the removal of the III-V substrate.
Zearalenone (ZEA), a kind of nonsteroidal mycotoxin with estrogenic effects, can influence animal reproductive capacity through interfering with estrogen signaling pathway. Previous studies have shown exposure to ZEA at high doses (higher than No-Observed Effect Level, NOEL) had a significant impact on mouse sperm quality and pregnant rate, but little is known about the effect of exposure to ZEA at low doses (lower than NOEL) on mouse reproductive capacity. This study evaluated the effects of exposure to low-dose ZEA on mouse spermatogenesis and semen quality. Male mice (CD-1) of 21 days were exposed to ZEA at 20, or 40 μg/kg body weight for 14, 28 or 42 days. After exposure to ZEA for 14 days, the spermatogenic cells in seminiferous tubules were declined dose-independently; however in groups treated by ZEA for 28 days, the spermatogenic cells were declined dose-dependently. Moreover, after treatment for 28 days or 42 days, the DNA double stand break (DSB) in spermatogenic cells were increased in a dose-dependent manner in treated groups. Compared with the control group, the sperm concentration, viability, motility, and hyperactive rate in treated groups were decreased dose-dependently and time-dependently. Meanwhile, deformity and mortality rate of sperm in treated groups were increased remarkably dose-dependently too. In conclusion, low dose ZEA impaired male reproductive capacity especially in spermatogenesis and semen quality of mouse. - Highlights: • Exposure of low dose Zearalenone decrease sperm concentration, viability, motility, and hyperactive rate of male mice. • Exposure of low dose Zearalenone impairs spermatogenesis. • Exposure of low dose Zearalenone leads to DSBs incidence increase in mouse germ cells.