Engineering Papers⌕ Search

Engineering topics

Li, Kai

Publications and source records attributed to Li, Kai.

At least 55 records · Page 3

Tailorable thermoplastic insulation foam composites enabled by porous-shell hollow glass spheres and expandable thermoplastic microspheres

Here we report a simple and commercially viable strategy to produce thermoplastic composite foams using synergistic foaming approaches – incorporating porous-shell hollow-interior glass spheres (PHGS) as a filler and utilizing expandable thermoplastic microspheres (EMS) as a physical blowing agent – for thermal insulation applications. The EMS in these composites ensure formation of highly porous, low-density foam while the PHGSs provide low thermal conductivity and lightweight mechanical reinforcement. Through systematic optimization of the PHGS and EMS loadings, a lightweight, and robust insulation with thermal resistivity greater than 27.7 m·K/W (R/in. > 4) is achieved. Notably, the fabricated foams also demonstrated comparable compressive strength than some commercial thermoplastic insulating materials. Through optimization of PHGS and EMS concentrations, results indicated similar thermal performance characteristics at varying foam densities, while higher loadings of both components lead to reduced insulation performance and weak mechanical stability of the foams. The results obtained, when coupled with the potential scalability and tailor ability of the overall process towards targeted insulation performance, not only endows competitiveness with current commercial thermoplastic insulating materials but also offers great promise for the development of unique thermoplastic composite foams for a variety of insulation systems.

36 MATERIALS SCIENCE↗

Multifunctional polymer composite coatings and adhesives by incorporating cellulose nanomaterials

Regardless of their applications, polymers are still considered mechanically weak and functionally insufficient for certain demanding coating and adhesive uses. To address those issues, nanomaterials have been extensively studied as reinforcing fillers, which have been proven to effectively promote the performance of polymer coatings/adhesives. However, conventional nanofillers are expensive and non-biodegradable. Meanwhile, cellulose nanomaterials (CNMs), a class of nanomaterials produced from biomass feedstocks, can circumvent the drawbacks of conventional nanofillers. Here, this review paper first focuses on the multi-functionalities CNMs bring to polymer coatings, including mechanical reinforcement (wear resistance and hardness enhancement), gas barrier, flame resistance, corrosion resistance, self-healing (controlled-release), optical regulation, self-cleaning/antifouling, and antimicrobial characteristics. Then we discuss the benefits of CNM addition to polymer adhesives, such as mechanical enhancement, curing promotion, volatile organic compound (VOC) suppression, and electrical conductivity. Finally, we provide insights into future research efforts with CNMs. The goal of this paper is to promote the pilot-scale study and commercial use of CNMs as multifunctional additives in green and sustainable polymer composite coating and adhesive formulations.

36 MATERIALS SCIENCE↗

Toughened polyester composites containing polyester matrix and droplets of high boiling liquid therein

A toughened polyester composite comprising: (i) a polyester matrix and (ii) droplets of a high boiling point liquid having a boiling point of at least 140° C. dispersed in said polyester matrix, wherein the high boiling point liquid is present in an amount of 0.1-10 wt % by weight of the toughened polyester composite, and wherein the composite may further include: (iii) a modifier selected from polycarboxylic, polyol, and polyamine compounds, wherein the modifier is present in an amount of 0.1-10 wt % by weight of the toughened polyester composite. Methods for producing the polyester composite are also described.

Ozcan, Soydan↗

Revealing the relationship between molecular weight of lignin and its color, UV-protecting property

Lignin has great potential as a natural, green, and sustainable broad-spectrum sunscreen active ingredient. However, the coexistence of dark color and sunscreen properties hinders its application in cosmetics. In this study, we focus on the effects of the molecular weight of lignin on tis UV-protecting property and color in order to prepare lignin-based sunscreen with high performance. We report a prepared sunscreen containing low molecular weight lignin (F5, <1000 g/mol) exhibits good UV-protecting property (sun protection factor (SPF) = 7.14) and light color advantages (ΔE = 46.2). Moreover, a strong synergistic effect on UV-protecting property exists between low molecular weight lignin and ethylhexyl methoxycinnamate (EHMC), resulting in high SPF of F5@EHMC-based sunscreen (55.56). Additionally, added TiO 2 can efficiently mitigate the dark color of lignin-based sunscreens due to prominent covering power of TiO 2 . Moreover, lignin-based sunscreens have good biocompatibility with HaCaT cells. This work is useful for understanding the mechanism of the UV-protecting property and dark color of lignin, and for designing an efficient and safe lignin-based sunscreen.

59 BASIC BIOLOGICAL SCIENCES↗

Impact of biomass ash content on biocomposite properties

Owing to its low cost and sustainable nature, lignocellulosic biomass has been utilized for reinforcing polymers, but it is crucial to understand the impact of high-ash concentrations in biomass on composite strength and processing. Biomass is not only desirable for biofuel production but could also have a strong market, if high-ash biomass is acceptable, for biocomposites. In this work, natural fibers (switchgrass and corn stover) were used to reinforce polylactic acid (PLA) to produce biocomposites. Natural fibers were pretreated to obtain fibers that contain different percentages of ash. The mechanical properties (such as Young's modulus, tensile strength, failure strain, storage modulus) of corn stover/PLA composites remained largely unaffected by the ash concentration of the biomass fibers, despite the large range of ash contents (2.2–11.9 wt%). Furthermore, the tensile strengths of switchgrass/PLA composites were slightly negatively affected by the ash concentration of the switchgrass fibers (0.7–2.1 wt%). Both the switchgrass/PLA and the corn stover/PLA composites exhibited a high-enough tensile strength (49–57 MPa) and suitable complex viscosity (2.0–7.0 kPa·s at the frequency of 3.2 rad/s). They are expected to be 3D-printable through an extrusion-based additive manufacturing process.

36 MATERIALS SCIENCE↗

Plot2Spectra: an automatic spectra extraction tool

Scientists cannot easily make use of numerical data encoded in plot images, such as of spectroscopy data, in scientific literature. Plot2Spectra was developed to use computer vision tools to automatically digitize plot images.

Jiang, Weixin↗

Hermetically sealed porous-wall hollow microspheres enabled by monolithic glass coatings: Potential for thermal insulation applications

Thermal insulation materials are crucial to improve the energy performance of buildings and industrial applications. We report an approach to create hermetically vacuum-sealed silica-based hollow microspheres that can lower the thermal conductivity of closed-cell insulation materials. The wall structure of these hollow microspheres includes a reticulated network of pores or channels that extend through the thickness of the wall. When a thin layer of glass material is applied to the wall exterior, followed by a vacuum-assisted thermal treatment process, the coated microsphere surfaces display a highly dense conformal coverage and near-complete elimination of surface porosity. The sealing efficiency of these microspheres is verified by trapping argon within their cavities as well as through evacuating their hollow cores. Notably, incorporating the evacuated microspheres into a polymer matrix resulted in ~27% enhancement in its thermal insulation performance and no notable loss of performance was observed following three months of exposure to ambient conditions. Thus, we believe that the present study offers a commercially viable strategy that opens the door to applications of such inorganic hollow particles in areas ranging from vacuum-based thermal insulation systems to catalysis, separation technologies, and medical fields.

36 MATERIALS SCIENCE↗

Aqueous-Based Polyimine Functionalization of Cellulose Nanofibrils for Effective Drying and Polymer Composite Reinforcement

Here a simple strategy was developed to synthesize polyimine-coated cellulose nanofibrils (CNF) for effective CNF drying and composite reinforcement. The polyimine was synthesized in an aqueous medium using a selective hydrophilic and hydrophobic component that forces the polyimine to precipitate, which prevents the reverse imine reaction. The polyimine coating allowed the CNF to be easily oven-dried while maintaining a fibrillar morphology to provide mechanical reinforcement in poly(ethylene terephthalate glycol) (PETG) composites. In comparison, poor mechanical performance and a heterogeneous fracture surface were observed when the coated CNF were incorporated into poly(l-lactide) (PLA) composites. It is hypothesized that intermolecular aromatic–aromatic interactions are formed at the interface between fibers and the polymer matrix in the PETG system, while no such phenomena occur in the PLA system. Overall, this facile strategy to produce modified, easily dried CNF can be adapted to produce polyimine-coated CNF with unique functionalities that are useful in a range of applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role Evaluation of Active Groups in Lignin on UV-Shielding Performance

The contribution of the active groups in lignin to ultraviolet (UV)-shielding performance still remains unclear. In this study, we employed 16 lignin model compounds and theoretical calculations to ascertain the contribution of different functional groups to UV-shielding performance. These results showed that the order of UV-shielding performance on functional groups was -C=C–CHO > -C=C–COOH > -C=C–CH 2 OH > --C=C > quinone > -COOH > -OCH 3 ≈ -OH. Moreover, the synergism between the para-substituted electron-donating group -OH and the electron-withdrawing group allyl on the aromatic ring played a major role in UV-shielding performance of lignin models, whereas the additive effect of meta/ortho-substituted -OCH 3 played a secondary role. Furthermore, we found that the hydrophile–lipophile balance (HLB) value of lignin models also greatly affected the sunscreen protection factor (SPF) of lignin model-based sunscreens. A closer HLB value of lignin to 8.89 corresponded with a higher SPF of the lignin model-based sunscreen. The commercial photoprotective ingredient ethylhexyl methoxycinnamate (EHMC) and lignin models had a synergistic effect on UV-shielding performance caused by the π–π stacking interaction between the parallel-displaced stacked aromatic rings of lignin models and EHMC. Additionally, the UV irradiation test showed that these sunscreens prepared using lignin models and EHMC exhibited good photostability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Novel Sustainable Process for Multilayer Graphene Synthesis Using CO 2 from Ambient Air

Graphene produced by different methods can present varying physicochemical properties and quality, resulting in a wide range of applications. The implementation of a novel method to synthesize graphene requires characterizations to determine the relevant physicochemical and functional properties for its tailored application. We present a novel method for multilayer graphene synthesis using atmospheric carbon dioxide with characterization. Synthesis begins with carbon dioxide sequestered from air by monoethanolamine dissolution and released into an enclosed vessel. Magnesium is ignited in the presence of the concentrated carbon dioxide, resulting in the formation of graphene flakes. These flakes are separated and enhanced by washing with hydrochloric acid and exfoliation by ammonium sulfate, which is then cycled through a tumble blender and filtrated. Raman spectroscopic characterization, FTIR spectroscopic characterization, XPS spectroscopic characterization, SEM imaging, and TEM imaging indicated that the graphene has fifteen layers with some remnant oxygen-possessing and nitrogen-possessing functional groups. The multilayer graphene flake possessed particle sizes ranging from 2 µm to 80 µm in diameter. BET analysis measured the surface area of the multilayer graphene particles as 330 m 2 /g, and the pore size distribution indicated about 51% of the pores as having diameters from 0.8 nm to 5 nm. This study demonstrates a novel and scalable method to synthesize multilayer graphene using CO 2 from ambient air at 1 g/kWh electricity, potentially allowing for multilayer graphene production by the ton. The approach creates opportunities to synthesize multilayer graphene particles with defined properties through a careful control of the synthesis parameters for tailored applications.

36 MATERIALS SCIENCE↗

Material Compatibility of 3D Printed Polymer Composites with Low GWP Refrigerants

The recent development of 3D printing brings numerous opportunities to develop polymer heat exchangers with desired configurations and allows access to the new complex engineering design for better performance. To be used in the HVAC&R system, the compatibility of these materials to refrigerants needs to be thoroughly investigated and understood. This study tested the material compatibility of the printed polymer composites according to the ASHRAE Guideline 38 using metal pressure vessels. These printed parts were tested with R-134A, R-1234YF, R-1234ZE, R-1233ZD(E), and 32-3 MAF POE (10 wt.%) was used as the lubricants. The change in volume, mass, hardness, and mechanical properties was studied in detail. Different compatibility of the composites with refrigerants was observed when the composition of the composite changed. After exposure to refrigerants, the morphological and thermal properties were studied with the scanning electron microscope, thermogravimetric analysis, and differential scanning calorimetry to further reveal the influence of these refrigerants.

Li, Kai↗

A Computational Fluid Dynamic Study on Polymer Heat Exchangers

Polymer heat exchangers have been developed for the applications involving weight restrictions or chemical compatibility and fouling issues owing to the low density, anticorrosive properties, and low thermal expansion of polymers. Recently development of additive manufacturing also brings new opportunities to make polymer heat exchangers with desired design that was hard to realize before. However, due to the lower thermal conductivity polymer composite, the overall heat transfer performance is still a challenge in the polymer heat exchanger technology. In present work, a computational fluid dynamic (CFD) model has been developed to study the overall heat transfer performance of additively manufactured polymer heat exchangers. The CFD results offer an insight of fluid flow and temperature distribution in the polymer heat exchangers. This study provides a guidance not only on the polymer material selection but also on the design of polymer heat exchangers. The conclusions will be helpful to design a polymer heat exchanger whose overall heat transfer performance is comparable to a metal heat exchanger.

Zhang, Mingkan↗

The substantial role of May soil temperature over Central Asia for summer surface air temperature variation and prediction over Northeastern China

The slowly varying soil temperature can exert local and nonlocal influences on regional climate system, and may thus provide a critical source of subseasonal-to-seasonal climate prediction. In this study, we identify that soil temperature in May over the key region of Central Asia (42 °N–50 °N, 62 °E–80 °E, KRCA) from Noah, Mosaic, CLM and ERA-interim datasets is closely linked to variations of the surface air temperature, daily maximum temperature and hot days over Northeastern China in summer (June-July-August), with correlation coefficients of regional average detrended time series ranging from 0.42 to 0.54, and all significant at the 99% confidence level for the period of 1979-2018. The possible physical mechanism behind the substantial downstream impacts of soil temperature over Central Asia are explored via diagnostical analysis combined with regional climate model experiments. Warmer soil temperature in May over the KRCA tends to cause positive anomalies of geopotential height in summer over Northeastern China through the Rossby wave propagation, and associated stronger subsidence warming, less cloud cover, more solar radiation reaching the surface, higher planetary boundary layer, and stronger thermal advection at 850 hPa, which provide favorable conditions for warmer surface air temperature particularly in the daytime as well as more hot days. Here this study further reveals that soil temperature over Central Asia in May makes important contribution to prediction of summer surface air temperature, daily maximum temperature and hot days over Northeastern China in terms of regional average time series and spatial patterns. Our findings highlight the previously-unknown substantial role of antecedent soil temperature condition over Central Asia for summer surface air temperature variation and prediction over Northeastern China.

54 ENVIRONMENTAL SCIENCES↗

Pretreatment of lignocellulosic feedstocks for cellulose nanofibril production

Cellulose nanofibrils (CNFs) have attracted a great deal of research interest in recent years attributable to the low cost and abundance of lignocellulosic biomass from which they can be extracted. These materials have potential applications in a wide array of areas because of their unique properties such as ultra-high aspect ratios and specific strengths. However, the high energy required to extract CNFs from biomass through fibrillation often makes them prohibitively expensive or negates their inherent sustainability. As such, a variety of biomass treatments prior to fibrillation have been investigated by researchers to reduce the energy requirements of CNF extraction, improve the efficacy of biomass fibrillation and subsequent processes, and/or impart functionality in resulting nanofibrils. In this work, both widely used and emerging mechanical, chemical, and enzymatic pretreatments used prior to fibrillation of lignocellulosic biomass for CNF extraction are reviewed. Attention is given to the effect of these various pretreatments on the properties of the resulting CNFs. Finally, the energy consumption in fibrillation processes with and without the use of pretreatments is compared, and future perspectives on challenges and opportunities in lignocellulosic feedstock pretreatments are discussed.

59 BASIC BIOLOGICAL SCIENCES↗

Hydrogen bond–induced aqueous-phase surface modification of nanocellulose and its mechanically strong composites

Aqueous-phase surface modification of nanocellulose is desirable because nanocellulose is generally produced via water-based fibrillation. In this study, a hydrogen bond–induced surface modification of cellulose nanofibrils (CNFs) in water was developed. Tannic acid and polyvinylpyrrolidone were chosen to modify the CNFs because of their strong capacity for hydrogen bond formation. By tuning the hydrogen bond formation between CNFs, tannic acid, and polyvinylpyrrolidone, CNFs with different surface hydrophilicity were achieved. Additionally, the modified CNFs can assemble into strong and tough composites owing to the hydrogen bond network in the system. Modified CNFs demonstrated 76% higher tensile strength and 100% higher toughness than those of unmodified CNFs, reaching 162 MPa and 12.7 MJ/m 3 , respectively. This study provides a new water-based modification strategy for the nanocellulose, leading the way toward producing strong nanocellulose composites via noncovalent interaction.

36 MATERIALS SCIENCE↗

Exploiting chitosan to improve the interface of nanocellulose reinforced polymer composites

Cellulose nanofibrils (CNFs) have been widely used as a nanofiller for polymer composite reinforcement due to their excellent mechanical properties. However, CNF is produced in water and needs to be dried prior to use in composite materials. The presence of hydroxyl groups on the surface of CNF creates strong hydrogen bonding that makes it difficult and costly to dry. Additionally, the hydrophilicity at the fiber surface results in agglomeration of CNFs within many polymer matrices. In this study, chitosan (CS) was co-precipitated with CNF to produce a dual-bonding filler for use in poly (lactic acid) (PLA) composites. CS promotes improved interfacial interaction within the polymer matrix by forming strong hydrogen bonds with the CNF and potential covalent bonds with the PLA. Finally, the results confirmed that the addition of a small amount of CS significantly improved the mechanical properties compared to PLA + CNF composites and neat PLA. The detailed study of the PLA + CNF/CS composites reveals the synergetic effect of the hydrogen and covalent bonding mechanism for PLA reinforcement.

59 BASIC BIOLOGICAL SCIENCES↗

Epoxy as Filler or Matrix for Polymer Composites

Epoxy is a widely used polymer because of its ease of processing, high adhesiveness, and high chemical resistance. Epoxy-based composites are commonly used in aerospace, automotive, and marine applications. The epoxy type, function, curing agent, and curing process are discussed in this chapter. Epoxy is used as either a filler or polymer matrix in composite applications. As a filler, the epoxy modification on the fiber is discussed. As a polymer matrix, the epoxy is reinforced by natural and synthetic fibers. The manufacturing process and the fabricated epoxy-based composites’ performance (e.g., mechanical and thermal properties) are investigated. The advantages and disadvantages of epoxy’s function are discussed and summarized. Epoxy modification is an effective approach to improve the composites’ performance.

Zhao, Xianhui↗