An experimental and theoretical study on rotational constants of vibrationally excited CH2OO
Not Available
Engineering topics
Publications and source records attributed to Li, Jun.
Not Available
Poly(3,4-ethylenedioxythiophene)-poly(styrenesulphonate) (PEDOT:PSS) is the most used organic hole injecting or hole transporting material. The hole carrying matrix PEDOT is highly doped by the acidic dopant PSS. When coated onto a substrate, PEDOT:PSS makes a highly uniform conductive layer and a thin (<5 nm) overlayer of PSS covers the air interface. Semiconducting polymer layers for organic photovoltaics or light emitting diodes are coated on top. In this article, we demonstrate that the PSS layer will mix with almost all conjugated polymers upon thermal annealing. Depending on the Fermi energy of the polymer an electrochemical reaction can take place, p-type doping the polymer at the interface between the PEDOT:PSS and the semiconducting polymer. We use chemical and spectroscopic analysis to characterize the polymer/PSS interlayer. We show that the stable and insoluble interlayer has a great effect on the charge injection and extraction from the interface. Lastly we demonstrate and electronically model organic photovoltaic devices that are fabricated using these mixed interlayers.
Organic electronics promise to provide flexible, large-area circuitry such as photovoltaics, displays, and light emitting diodes that can be fabricated inexpensively from solutions. A major obstacle to this vision is that most conjugated organic materials are miscible, making solution-based fabrication of multilayer or micro- to nanoscale patterned films problematic. Here we demonstrate that the solubility of prototypical conductive polymer poly(3-hexylthiophene) (P3HT) can be reversibly "switched off" using high electron affinity molecular dopants, then later recovered with light or a suitable dedoping solution. Using this technique, we are able to stack mutually soluble materials and laterally pattern polymer films by evaporation or with light, achieving sub-micrometer, optically limited feature sizes. After forming these structures, the films can be dedoped without disrupting the patterned features; dedoped films have identical optical characteristics, charge carrier mobilities, and NMR spectra as as-cast P3HT films. Furthermore, this method greatly simplifies solution-based device fabrication, is easily adaptable to current manufacturing workflows, and is potentially generalizable to other classes of materials.
The electronic structure and optical properties of Pd-modified TiO 2 nanotubes (NTs) with a vertically aligned nanotubular structure grown by a two-step electrochemical anodization method have been studied using X-ray spectroscopy. X-ray absorption near-edge structure (XANES) at the Ti L 3,2 - and O K-edges was used to investigate the TiO 2 NTs before and after Pd modification. It was found that Pd nanoparticles (NPs) are uniformly coated on the NT surface. The Pd L 3 -edge of the deposited Pd NPs shows a more intense whiteline and a blue shift for the Pd L 3 -edge absorption threshold relative to Pd metal, indicating charge depletion from the Pd 4d orbital as a result NP formation. The lattice of Pd is slightly contracted upon NP formation, although it remains fcc as revealed by extended X-ray absorption fine structure (EXAFS) analysis at the Pd K-edge. X-ray-excited optical luminescence (XEOL) together with XANES with element and site specificity was used to study the optical luminescence from TiO 2 NTs. It was found that the defect-originated XEOL intensity dropped noticeably in the Pd NP-coated NTs, suggesting a Pd NP–TiO 2 -interaction-mediated reduction in the radiative recombination of electrons and holes. Finally, further evidence is provided by Ti 2 p resonant inelastic X-ray scattering (RIXS), in which no low-energy loss features (d–d transitions) were observed. The implications of these results are discussed.
The energy storage properties of Pb 0.92 La 0.08 Zr 0.52 Ti 0.48 O 3 (PLZT) films grown via pulsed laser deposition were evaluated at variable film thickness of 125, 250, 500, and 1000 nm. These films show high dielectric permittivity up to ~1200. Cyclic I–V measurements were used to evaluate the dielectric properties of these thin films, which not only provide the total electric displacement, but also separate contributions from each of the relevant components including electric conductivity (D1), dielectric capacitance (D2), and relaxor-ferroelectric domain switching polarization (P). Our results show that, as the film thickness increases, the material transits from a linear dielectric to nonlinear relaxor-ferroelectric. And while the energy storage per volume increases with the film thickness, the energy storage efficiency drops from ~80% to ~30%. The PLZT films can be optimized for different energy storage applications by tuning the film thickness to optimize between the linear and nonlinear dielectric properties and energy storage efficiency.
Laser-clad composite coatings on the Ti6Al4V substrate were heat-treated at 700, 800, and 900 °C for 1 h. The effects of post-heat treatment on the microstructure, microhardness, and fracture toughness of the coatings were investigated by scanning electron microscopy, X-ray diffractometry, energy dispersive spectroscopy, and optical microscopy. The wear resistance of the coatings was evaluated under dry reciprocating sliding friction at room temperature. The coatings mainly comprised some coarse gray blocky (W,Ti)C particles accompanied by the fine white WC particles, a large number of black TiC cellular/dendrites, and the matrix composed of NiTi and Ni{sub 3}Ti; some unknown rich Ni- and Ti-rich particles with sizes ranging from 10 nm to 50 nm were precipitated and uniformly distributed in the Ni{sub 3}Ti phase to form a thin granular layer after heat treatment at 700 °C. The granular layer spread from the edge toward the center of the Ni{sub 3}Ti phase with increasing temperature. A large number of fine equiaxed Cr{sub 23}C{sub 6} particles with 0.2–0.5 μm sizes were observed around the edges of the NiTi supersaturated solid solution when the temperature was further increased to 900 °C. The microhardness and fracture toughness of the coatings were improved with increased temperature due to the dispersion-strengthening effect of the precipitates. Dominant wear mechanisms for all the coatings included abrasive and delamination wear. The post-heat treatment not only reduced wear volume and friction coefficient, but also decreased cracking susceptibility during sliding friction. Comparatively speaking, the heat-treated coating at 900 °C presented the most excellent wear resistance. - Highlights: • TiC + WC reinforced intermetallic compound matrix composite coatings were produced. • The formation mechanism of the reinforcements was analyzed. • Two precipitates were generated at elevated temperature. • Cracking susceptibility and microhardness of the coatings were improved. • Post-heat treatment enhances wear resistance of the coatings.
LiF–ThF4 molten salt (MS) is the fuel for advanced MS reactors. Knowledge of the microscopic MS structure and dynamics is required for an understanding of the macroscopic physical and chemical properties of the MS phases. We have performed molecular dynamics simulations on LiF–ThF4 MS at different molar percentages (LiF/ThF4 = 20.0 to 0.5) and temperatures (1100 to 1400 K). Experimental deductions and recent theoretical results on the coordination structures and transport properties of the MS are well reproduced. The density of states of the [ThF8]4– species and the character of the Th–F bonding are investigated. The interplay between the microscopic structures and the dynamical properties is elucidated. Corresponding to the smaller effective radius of Zr, the activation barrier of the M4+–F– dissociation and the lifetime of the first coordination shell of M4+ are both smaller for M = Th than for M = Zr in the respective LiF–MF4 systems. The shorter Zr–F bond is stronger than the longer Th–F bond, while the coordination number of the predominant [ZrF7]3– species is smaller than that of the dominant [ThF8]4– species. An approximate formula is proposed for the lifetime of F– ions in the first solvation shell of molten MFn (M = Y, Zr, Th) in terms of the radial distribution function.
We apply the Statefinder hierarchy and the growth rate of matter perturbations to discriminate modified Chaplygin gas (MCG), generalized Chaplygin gas (GCG), superfluid Chaplygin gas (SCG), purely kinetic k-essence (PKK), and ΛCDM model. We plot the evolutional trajectories of these models in the Statefinder plane and in the composite diagnostic plane. We find that GCG, MCG, SCG, PKK, and ΛCDM can be distinguished well from each other at the present epoch by using the composite diagnostic (ε(z), S{sup (1)}{sub 5}). Using other combinations, such as (S{sup (1)}{sub 3}, S{sup (1)}{sub 4}), (S{sup (1)}{sub 3}, S{sub 5}), (ε(z), S{sup (1)}{sub 3}), and (ε(z), S{sub 4}), some of these five dark energy models cannot be distinguished.
Photoresponse properties of a large area MoS{sub 2} atomic layer synthesized by vapor phase deposition method without any catalyst are studied. Scanning electron microscopy, atomic force microscopy, Raman spectrum, and photoluminescence spectrum characterizations confirm that the two-dimensional microstructures of MoS{sub 2} atomic layer are of high quality. Photoelectrical results indicate that the as-prepared MoS{sub 2} devices have an excellent sensitivity and a good reproducibility as a photodetector, which is proposed to be ascribed to the potential-assisted charge separation mechanism.
Full-dimensional quantum dynamics and quasi-classical trajectory calculations are reported for the title reaction on a recently constructed ab initio based global potential energy surface. Strong mode specificity was found, consistent with the prediction of the sudden vector projection model. Specifically, the HF vibration strongly promotes the reaction while the OH vibration has little effect. Rotational excitations of both reactants slightly enhance the reaction.
Transdifferentiation of hepatic stellate cells (HSCs) into myofibroblasts plays a critical role in the development of liver fibrosis, since myofibroblasts are the key cells responsible for excessive deposition of ECM proteins. Transient receptor potential melastatin 7 (TRPM7), a non-selective cation channel with protein serine/threonine kinase activity, has been demonstrated to function in the proliferation of activated HSCs. Here, we investigated the functional role of TRPM7 in collagen deposition in activated HSC-T6 cells (a rat hepatic stellate cell line). TRPM7 mRNA and protein were measured by Real-time PCR and Western blot in TGF-β1-activated HSC-T6 cells in vitro. Results demonstrated that TRPM7 protein was dramatically increased in fibrotic human livers. Stimulation of HSC-T6 cells with TGF-β1 increased TRPM7 mRNA and protein level in a time-dependent manner. Nevertheless, TGF-β1-elicited upregulation of TRPM7 in HSC-T6 cells was abrogated by SB431542 (TGF-β1 receptor blocker) or SIS3 (inhibitor of Smad3 phosphorylation). Additionally, blockade of TRPM7 channels with non-specific TRPM7 blocker 2-APB or synthetic siRNA targeting TRPM7 attenuated TGF-β1-induced expression of myofibroblast markers, as measured by the induction of α-SMA and Col1α1. Silencing TRPM7 also increased the ratio of MMPs/TIMPs by increasing MMP-13 expression and decreasing TIMP-1 and TIMP-2 levels. Strikingly, phosphorylation of p-Smad2 and p-Smad3, associated with collagen production, was decreased in TRPM7 deficient HSC-T6 cells. These observations suggested that TGF-β1 elevates TRPM7 expression in HSCs via Smad3-dependant mechanisms, which in turn contributes Smad protein phosphorylation, and subsequently increases fibrous collagen expression. Therefore, TRPM7 may constitute a useful target for the treatment of liver fibrosis. - Highlights: • Upregulation of TRPM7 protein in human fibrotic livers • Upregulation of TRPM7 by TGF-β1 elicited Smad signaling in HSC-T6 cells • Blockade of TRPM7 decreased α-SMA and Col1α1 expressions in activated HSC-T6 cells • Silencing of TRPM7 led to collagen degradation in TGF-β1 stimulated HSC-T6 cells • TRPM7 upregulation contributes to the activation of TGF-β1/Smad pathway.
Abstract not provided
Abscisic acid (ABA) is an essential hormone that controls plant growth, development, and responses to abiotic stresses. Central for ABA signaling is the ABA-mediated autoactivation of three monomeric Snf1-related kinases (SnRK2.2, -2.3, and -2.6). In the absence of ABA, SnRK2s are kept in an inactive state by forming physical complexes with type 2C protein phosphatases (PP2Cs). Upon relief of this inhibition, SnRK2 kinases can autoactivate through unknown mechanisms. Here, we report the crystal structures of full-length Arabidopsis thaliana SnRK2.3 and SnRK2.6 at 1.9- and 2.3-{angstrom} resolution, respectively. The structures, in combination with biochemical studies, reveal a two-step mechanism of intramolecular kinase activation that resembles the intermolecular activation of cyclin-dependent kinases. First, release of inhibition by PP2C allows the SnRK2s to become partially active because of an intramolecular stabilization of the catalytic domain by a conserved helix in the kinase regulatory domain. This stabilization enables SnRK2s to gain full activity by activation loop autophosphorylation. Autophosphorylation is more efficient in SnRK2.6, which has higher stability than SnRK2.3 and has well-structured activation loop phosphate acceptor sites that are positioned next to the catalytic site. Together, these data provide a structural framework that links ABA-mediated release of PP2C inhibition to activation of SnRK2 kinases.
Abscisic acid (ABA) is an essential hormone for plants to survive environmental stresses. At the center of the ABA signaling network is a subfamily of type 2C protein phosphatases (PP2Cs), which form exclusive interactions with ABA receptors and subfamily 2 Snfl-related kinase (SnRK2s). Here, we report a SnRK2-PP2C complex structure, which reveals marked similarity in PP2C recognition by SnRK2 and ABA receptors. In the complex, the kinase activation loop docks into the active site of PP2C, while the conserved ABA-sensing tryptophan of PP2C inserts into the kinase catalytic cleft, thus mimicking receptor-PP2C interactions. These structural results provide a simple mechanism that directly couples ABA binding to SnRK2 kinase activation and highlight a new paradigm of kinase-phosphatase regulation through mutual packing of their catalytic sites.
Abstract not provided
High-pressure refractive index of optical window materials not only can provide information on electronic polarizability and band-gap structure, but also is important for velocity correction in particle-velocity measurement with laser interferometers. In this work, the refractive index of r-cut sapphire window at 1550 nm wavelength was measured under shock pressures of 5–65 GPa. The refractive index (n) decreases linearly with increasing shock density (ρ) for shock stress above the Hugoniot elastic limit (HEL): n = 2.0485 (± 0.0197) − 0.0729 (± 0.0043)ρ, while n remains nearly a constant for elastic shocks. This behavior is attributed to the transition from elastic (below HEL) to heterogeneous plastic deformation (above HEL). Based on the obtained refractive index-density relationship, polarizability of the shocked sapphire was also obtained.
Cell-free RNA and protein synthesis (CFPS) is becoming increasingly used for protein production as yields increase and costs decrease. Advances in reconstituted CFPS systems such as the Protein synthesis Using Recombinant Elements (PURE) system offer new opportunities to tailor the reactions for specialized applications including in vitro protein evolution, protein microarrays, isotopic labeling, and incorporating unnatural amino acids. In this study, using firefly luciferase synthesis as a reporter system, we improved PURE system productivity up to 5 fold by adding or adjusting a variety of factors that affect transcription and translation, including Elongation factors (EF-Ts, EF-Tu, EF-G, and EF4), ribosome recycling factor (RRF), release factors (RF1, RF2, RF3), chaperones (GroEL/ES), BSA and tRNAs. The work provides a more efficient defined in vitro transcription and translation system and a deeper understanding of the factors that limit the whole system efficiency.
Abstract not provided