Engineering Papers⌕ Search

Engineering topics

Li, Jun

Publications and source records attributed to Li, Jun.

At least 181 records · Page 10

Designing antiphase boundaries by atomic control of heterointerfaces

Significance The mechancial and transport properties of every material are intimately coupled to the generation and formation of defects. In many systems, the nucleation process of defects is highly unpredictable due to the multiple coexisting nucleation mechanisms. A strategy to design and manipulate defect nucleation and formation can improve our understanding and in principle lead to the ability to control performance. Here we present a simple approach of designing 2D defects—named antiphase boundaries—using an atomic-controlled high-quality interface. These defects have a well-defined origin, location, and nucleation mechanism. Via advanced synthesis technology, atomically resolved electron microscopy, and theory, we reveal that these defects display distinctive properties such as physical merging and antipolar structural phases to potentially achieve memory devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The effect of scanning jitter on geometric phase analysis in STEM images

Geometric phase analysis (GPA) is a useful method to map strain distribution in atomically resolved scanning/transmission electron microscopy (S/TEM) images. Nevertheless, the inevitable periodic jitter of electron probe in STEM along the scanning direction due to the interference of electric power supply, including grounding, can give rise to major artifacts, as evidenced by the appearance of satellite spots surrounding all main peaks in the power spectrum of the images. Here we reveal the origin of the image artifacts related to the probe jitter by mapping the image distortion component εxx using the GPA algorithm. The effect is verified by introducing a periodic displacement field to a STEM image simulated from a perfect crystal structure, and the calculated εxx maps show very good agreement with the experimental observations. Based on the quantitative analysis of the images distortion, we propose and test a feasible strategy to eliminate the effect of probe jitter from STEM images. Successful examples illustrate that the approach can help improve the accuracy in quantification of STEM images.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Metastable Intermediates in Amorphous Titanium Oxide: A Hidden Role Leading to Ultra-Stable Photoanode Protection

Metastable intermediates represent a non-equilibrium state of matter that may impose profound impacts to materials properties beyond our understandings of monolithic and equilibrium systems. Here, we report a discovery of hidden metastable intermediates in amorphous TiO 2 thin films and their critical role in electrochemical damage. These intermediates have a non-bulk crystal-like structure and exhibit significantly higher electrical conductivity than both the amorphous and the crystalline phases. When these TiO 2 films are applied to protect Si photoelectrochemical (PEC) photoanodes, the intermediates can induce localized high electrical currents that largely accelerate the etching of the TiO 2 film and the Si electrode underneath. The intermediates can be effectively suppressed by raising their nucleation barrier via reducing the film thickness from 24 to 2.5 nm. The homogeneous amorphous TiO 2 -film-coated Si photoanodes achieved more than 500 h of PEC water oxidation at a steady photocurrent density of over 30 mA·cm –2 .

36 MATERIALS SCIENCE↗

Probing the pathway of an ultrafast structural phase transition to illuminate the transition mechanism in Cu 2 S

Disentangling the primary order parameter from secondary order parameters in phase transitions is critical to the interpretation of transition mechanisms in strongly correlated systems and quantum materials. Here in this work, we present a study of structural phase transition pathways in superionic Cu 2 S nanocrystals that exhibit intriguing properties. Utilizing ultrafast electron diffraction techniques sensitive to both the momentum-space and the time-domain, we distinguish the dynamics of crystal symmetry breaking and lattice expansion in this system. We are able to follow the transient states along the transition pathway, and so observe the dynamics of both the primary and secondary order parameters. Based on these observations, we argue that the mechanism of structural phase transition in Cu 2 S is dominated by the electron-phonon coupling. Lastly, this mechanism advances the understanding from previous results, where the focus was solely on dynamic observations of the lattice expansion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strong Graphene 3D Assemblies with High Elastic Recovery and Hardness

The rational design and construction of 3D graphene assemblies is a crucial step to extend the graphene properties for practical applications. In this work, a novel interfacially reactive self-assembling process is reported to prepare well-organized 3D honeycomb-like graphene assemblies with unique polygonal nanopores interconnected by silicon-oxygen chemical bonds. The newly developed silicate-bridged graphene assembly (SGA) exhibits an exceptionally high hardness of 13.09 GPa, outperforming all existing 3D graphene materials, while maintains high Young’s modulus (162.96 GPa), elastic recovery (75.27%), and superb thermal stability (600 °C in air). The observed unusual merits are resulted from unique pore structure combining the mechanical stability of the trihedral-nanopore structure and the deformability of the other polygonal nanopores. As a filling material, a merely 0.05% (w/w) addition of SGA could double the impact resistance of unsaturated resins (e.g., polyester). While SGA is attractive for various applications, including body armors, wearable electronics, space elevators, and multifunctional reinforcement fibers for automobiles, and aerospace vehicles, the novel liquid sodium-water interfacial reactive self-assembling developed in this study could open avenues for further development of various well-defined 3D assemblies from graphene and many other materials.

36 MATERIALS SCIENCE↗

A diuranium carbide cluster stabilized inside a C 80 fullerene cage

Unsupported non-bridged uranium–carbon double bonds have long been sought after in actinide chemistry as fundamental synthetic targets in the study of actinide-ligand multiple bonding. Here we report that, utilizing I h (7)-C 80 fullerenes as nanocontainers, a diuranium carbide cluster, U=C=U, has been encapsulated and stabilized in the form of UCU@I h (7)-C 80 . This endohedral fullerene was prepared utilizing the Krätschmer–Huffman arc discharge method, and was then co-crystallized with nickel(II) octaethylporphyrin (Ni II -OEP) to produce UCU@I h (7)-C 80 ·[Ni II -OEP] as single crystals. X-ray diffraction analysis reveals a cage-stabilized, carbide-bridged, bent UCU cluster with unexpectedly short uranium–carbon distances (2.03 Å) indicative of covalent U=C double-bond character. The quantum-chemical results suggest that both U atoms in the UCU unit have formal oxidation state of +5. The structural features of UCU@I h (7)-C 80 and the covalent nature of the U(f 1 )=C double bonds were further affirmed through various spectroscopic and theoretical analyses.

36 MATERIALS SCIENCE↗

Size-dependent dynamic structures of supported gold nanoparticles in CO oxidation reaction condition

Significance Gold is the noblest metal. However, when the size decreases to nanoscale and is supported on reducible oxides, the gold nanoparticle shows exceptionally high catalytic performance even at low temperatures. Here, through state-of-the-art in situ aberration-corrected environmental transmission electron microscopy and ab initio molecular-dynamic simulations, we discovered that, upon exposing to reactant gas (carbon monoxide and oxygen), ultrasmall gold clusters on ceria show a size-dependent order-to-disorder transformation with generation of dynamic low-coordinated atoms, which presumably can effectively boost the oxidation reaction of carbon monoxide. The findings provide much-needed insights on the origin of size-dependent catalytic properties of supported gold and demonstrate a size effect in absorbent–particle interactions that may widely exist and play an essential role in heterogeneous catalysts.

He, Yang↗

Linearly aligned single-chiral vortices in hexagonal manganites by in situ electric arc heating

Nanoscale topological defects, such as vortices and skyrmions in ferroic systems, have been intensively investigated due to their intriguing properties and behaviors. In addition to harnessing and tuning their functionalities, spatial manipulation and control of topological defects as functional elements are important for future nanotechnologies. Here in this paper, we report a linear alignment behavior of single-chiral vortices observed in thin transmission electron microscopy samples of multiferroic hexagonal manganites during an in situ heating experiment. In order to avoid chemical degradation during high-temperature heating in vacuum, we have utilized a rapid heating and quenching by in situ electric arcing. Using atomic resolution electron microscopy and phase-field simulation, we found that vortices and antivortices formed near the phase transition temperature are pulled out in the opposite directions by mechanical strain to leave single-chiral vortices linearly aligned along an isothermal line formed during quenching. In conclusion, Oour study provides important insight into spatial manipulation of the topological defects in oxide multiferroics by investigating far-equilibrium dynamics of symmetry-breaking continuous phase transitions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Discharge Permit-1845 Quarterly Status Report July 2018

Trichloroethene (TCE) and nitrate have been identified as constituents of concern in groundwater at the Sandia National Laboratories, New Mexico (SNL/NM) Technical Area (TA)-V Groundwater (TAVG) Area of Concern (AOC) based on detections above the U.S. Environmental Protection Agency (EPA) maximum contaminant level (MCL) in samples collected from monitoring wells. The EPA MCLs and the State of New Mexico drinking water standards for TCE and nitrate are 5 micrograms per liter and 10 milligrams per liter (as nitrogen), respectively.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Recent Progress in Biomass–Derived Electrode Materials for High Volumetric Performance Supercapacitors

Here, tremendous efforts have been spent on the development of electrical energy storage (EES) systems with high volumetric performance in the past few years due to the evergrowing demand of miniaturized, portable electronic devices, and electric vehicles. Among all the EES devices, supercapacitors with electrode materials derived from biosources have attracted special attention due to their eco-friendliness, natural abundance, their intrinsic porous structures as well as their renewable and sustainable features. However, the relatively low packing densities make their specific volumetric capacitance intrinsically low, which has largely limited their further application in the supercapacitors. To address these issues, various promising approaches ranging from structural manufacture to compositional design are applied and significant breakthroughs are witnessed in recent years. In this progress report, key factors influencing the volumetric performance of biomass-derived electrode materials are systematically discussed with a particular focus spanning from fundamental to operational aspects. This work provides insights into the development of high-volumetric-performance biomass-derived supercapacitors by comprehensively summarizing recent advances in the rational structural design and fabrication. Perspectives regarding the future challenges and promising research directions on the design of next-generation EES devices are also provided.

36 MATERIALS SCIENCE↗

Facile synthesis of gold trisoctahedral nanocrystals with controllable sizes and dihedral angles

Shape-controlled synthesis of Au nanocrystals is of paramount importance to their applications in plasmonics, catalysis, and nanomedicine. While the synthesis of Au nanocrystals enclosed by low-index facets has been greatly advanced over the past two decades, only limited progress has been made for their high-index counterparts. Here in this paper we report a robust route to the facile synthesis of Au trisoctahedral nanocrystals enclosed by high-index facets. Unlike the previously reported methods, our synthesis was conducted at room temperature, together with the introduction a new Au(III) precursor that was much harder to reduce than AuCl4–. In the setting of seed-mediated growth, the trisoctahedral nanocrystals could be readily prepared with sizes controllable from 20–80 nm and dihedral angles tunable in the range of 120–180 degrees. We further used computational modeling to demonstrate that the surface-functionalized Au trisoctahedral nanocrystal could outperform its spherical counterpart in terms of endocytic efficacy under identical conditions.

36 MATERIALS SCIENCE↗

Efficient Nitrogen Fixation via a Redox-Flexible Single-Iron Site with Reverse-Dative Iron -> Boron s Bonding

Model systems of the FeMo cofactor of nitrogenase have been explored extensively in catalysis to gain insights into their ability for nitrogen fixation that is of vital importance to the human society. Here we investigate the trigonal pyramidal borane-ligand Fe complex by first-principles calculations, and find that the variation of oxidation state of Fe along the reaction path correlates with that of the reverse-dative Fe?B bonding. The redox-flexibility of the reverse-dative Fe?B bonding helps to provide an electron reservoir that buffers and stabilizes the evolution of Fe oxidation state, which is essential for forming the key intermediates of N2 activation. Our work provides insights for understanding and optimizing homogeneous and surface single-atom catalysts with reverse-dative donating ligands for efficient dinitrogen fixation. The extension of this kind of molecular catalytic active center to heterogeneous catalysts is also discussed.

Single-Fe-atom catalyst, nitrogen fixation, redox-↗

Tuning color through sulfur and fluorine substitutions in the defect tin(II, IV) niobate pyrochlores

In this study, sulfur and fluorine substituted Sn 2 Nb 2 O 7 pyrochlore compounds were synthesized to produce brilliant orange/red colors as an environmentally friendly alternative to other toxic inorganic pigments. Neutron structure refinements indicate that the studied compositions crystallize in the pyrochlore structure with a large number of cation and/or anion vacancies and significant local structural disorder. The cubic unit cell decreases with increasing sulfur and fluorine content. The Sn 2+ cation is off-center by 0.39–0.48 Å from the ideal site, and the oxygen O' is strongly displaced to the 32e position by an extraordinarily large distance that has never been reported for a pyrochlore type phase. The unprecedented displacive disorder and unusual lattice evolution upon sulfur substitution are presumably driven by the strong lone pair stereoactivity associated with Sn 2+ . Chemical analysis confirmed the existence of sulfur and fluorine, and 119 Sn Mössbauer spectroscopy quantified the presence of both Sn 2+ and Sn 4+ in all compositions. The general formula representative of sulfur-containing pigments is nonstoichiometric Sn$2+\atop{2-z}$ (Nb 2-y Sn$4+\atop{y}$)O 7-z-y/2-x S x with the color varying according to x. The fluorine compound is refined to be Sn$2+\atop{2}$(Nb 0·958 Ti 0.984 Sn$4+\atop{0.058}$)O 6·376 F 0.206 with exclusively anion vacancies. Optical characterization was performed through diffuse reflectance and color meter measurements. The band gap is determined to be in the range of 2.35 to 2.05 eV as sample color changes from yellow to orange/red. Finally, all powder samples show 60–95% reflectance in the near-infrared (NIR) region, adding new functionality to the application of these compounds as “cool” pigments.

36 MATERIALS SCIENCE↗

Local Moment Instability of Os in Honeycomb Li 2.15 Os 0.85 O 3

Compounds with honeycomb structures occupied by strong spin orbit coupled (SOC) moments are considered to be candidate Kitaev quantum spin liquids. Here we present the first example of Os on a honeycomb structure, Li 2.15(3) Os 0.85(3) O3 (C2/c, a = 5.09 Å, b = 8.81 Å, c = 9.83 Å, β = 99.3°). Neutron diffraction shows large site disorder in the honeycomb layer and X-ray absorption spectroscopy indicates a valence state of Os (4.7 ± 0.2), consistent with the nominal concentration. We observe a transport band gap of Δ = 243 ± 23 meV, a large van Vleck susceptibility, and an effective moment of 0.85 μ B , much lower than expected from 70% Os(+5). No evidence of long range order is found above 0.10 K but a spin glass-like peak in ac-susceptibility is observed at 0.5 K. The specific heat displays an impurity spin contribution in addition to a power law ∝T (0.63±0.06) . Applied density functional theory (DFT) leads to a reduced moment, suggesting incipient itineracy of the valence electrons, and finding evidence that Li over stoichiometry leads to Os(4+)–Os(5+) mixed valence. Lastly, this local picture is discussed in light of the site disorder and a possible underlying quantum spin liquid state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗