Engineering Papers⌕ Search

Engineering topics

Li, Jiaqi

Publications and source records attributed to Li, Jiaqi.

30 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Coordination environment of Si in calcium silicate hydrates, silicate minerals, and blast furnace slags: A XANES database

Understanding the silicate polymerization of calcium silicate hydrate (C-S-H) gel and its crystalline polymorphs is important in cement science. NMR can determine Si environments, but the measurement can be time-consuming and provides no spatial information. X-ray absorption near-edge structure (XANES) spectroscopy is a fast tool for probing Si coordination, possibly with spatial information. However, there lacks an understanding of Si K-edge XANES spectra of cement-related silicate phases. Here, a Si K-edge XANES spectral database of nanocrystalline C-S-H, C-S-H minerals, blast-furnace slags, and metakaolin is provided. Si K-edge of C-S-H minerals shifts to higher energies with higher polymerized Si and lower CaSi connectivity in the Si second nearest neighbor shell. Si K-edge energy shows weak correlations with Ca/Si ratio, average SiO bond length, and SiO{sub 4} distortion due to the structural complexity of silicates. The substitution of Al for Si shifts the Si K-edge of tobermorite and slags to higher energies.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of polycarboxylate ether on the expansion of ye'elimite hydration in the presence of anhydrite

Polycarboxylate ether (PCE), a commonly used superplasticizer, is known to influence the morphology of ettringite during the early hydration of C{sub 3}A- and ye'elimite-containing cements. According to existing theories, such morphological changes may be crucial to the expansive behavior of these cements. This paper studied the expansion of ye'elimite-anhydrite pastes and found the use of PCE to reduce expansion after 4 days of curing. Hydration studies were conducted by calorimetry, X-ray diffractometry, scanning electron microscopy, mercury intrusion porosimetry, inductively coupled plasma–optical emission spectrometry, and X-ray microtomography. The results show that the influences of PCE on the morphology of ettringite and the hydration of ye'elimite were quite small after 2 days. Based on the crystal growth theory, the range of pores in which ettringite can grow was calculated to explain the observed expansive behaviors. The presence of ettringite nano-crystals in aluminum hydroxide was also revealed and considered as a possible expansion mechanism.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Microstructure and water absorption of ancient concrete from Pompeii: An integrated synchrotron microtomography and neutron radiography characterization

There is renewed interest in using advanced techniques to characterize ancient Roman concrete due to its exceptional durability and low-carbon footprint. In the present work, samples were drilled from the “Hospitium” in Pompeii and were analyzed by synchrotron microtomography (μCT) and neutron radiography to study how the microstructure, including the presence of induced cracks, affects their water adsorption. The water distribution and absorptivity were quantified by neutron radiography. The 3D crack propagation, pore size distribution and orientation, tortuosity, and connectivity were analyzed from μCT results using advanced imaging methods. Porosity was also measured by mercury intrusion porosimetry (MIP) as a reference. Ductile fracture patterns were observed once cracks were introduced. Compared to Portland cement mortar/concrete, the Pompeii samples had relatively high porosity, low connectivity, and a similar coefficient of capillary penetration. In addition, permeability was predicted from models based on percolation theory and pore structure data to evaluate the fluid transport properties. Understanding the microstructure of ancient Pompeii concrete is important because it could inspire the development of modern concrete with high durability.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Binding of Campylobacter jejuni FliW Adjacent to the CsrA RNA-Binding Pockets Modulates CsrA Regulatory Activity

Campylobacter jejuni CsrA is an mRNA-binding, post-transcriptional regulator that controls many metabolic- and virulence-related characteristics of this important pathogen. In contrast to E. coli CsrA, whose activity is modulated by binding to small non-coding RNAs (sRNAs), C. jejuni CsrA activity is controlled by binding to the CsrA antagonist FliW. In this study, we identified the FliW binding site on CsrA. Deletion of the C-terminus of C. jejuni CsrA, which is extended relative to sRNA-binding CsrA proteins, abrogated FliW binding. Bacterial two-hybrid experiments were used to assess the interaction of FliW with wild-type CsrA and mutants thereof, in which every amino acid was individually mutated. Two CsrA mutations (V51A and N55A) resulted in a significant decrease in FliW binding. The V51A and N55A mutants also showed a decrease in CsrA-FliW complex formation, as assessed by size-exclusion chromatography and surface plasmon resonance. These residues were highly conserved in bacterial species containing CsrA orthologs whose activities are predicted to be regulated by FliW. The location of FliW binding was immediately adjacent to the two RNA-binding sites of the CsrA homodimer, suggesting the model that FliW binding to CsrA modulates its ability to bind to its mRNA targets either by steric hindrance, electrostatic repulsion, or by altering the overall structure of the RNA-binding sites.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Self-Assembly of Metallo-Supramolecules with Dissymmetrical Ligands and Characterization by Scanning Tunneling Microscopy

Asymmetrical and dissymmetrical structures are widespread and play a critical role in nature and life systems. In the field of metallo-supramolecular assemblies, it is still in its infancy for constructing artificial architectures using dissymmetrical building blocks. Herein, we report the self-assembly of supramolecular systems based on two dissymmetrical double-layered ligands. With the aid of ultra-high-vacuum, low-temperature scanning tunneling microscopy (UHV-LT-STM), we were able to investigate four isomeric structures corresponding to four types of binding modes of ligand LA with two major conformations complexes A. The distribution of isomers measured by STM and total binding energy of each isomer obtained by density functional theory (DFT) calculations suggested that the most abundant isomer could be the most stable one with highest total binding energy. Lastly, through shortening the linker between inner and outer layers and the length of arms, the arrangement of dissymmetrical ligand LB could be controlled within one binding mode corresponding to the single conformation for complexes B.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

3D Nanotomography of calcium silicate hydrates by transmission electron microscopy

Calcium silicate hydrate (C-S-H), is the principal hydration product of Portland cement that mainly contributes to the physical and mechanical properties of concrete. This paper aims to investigate the three-dimensional structure of C-S-H with Ca/Si ratios of 1.0 and 1.6 at the nanoscale using electron tomography. The 3D reconstructions and selected region of interest analysis confirm that the morphology of both C-S-H materials are foil-like structures. Additionally, the difference between the two materials is the density of elongated structures. C-S-H with Ca/Si ratio 1.6 is clearly composed of denser particles compared to the other C-S-H material due to overlapping of the foil-like structure. Pore analysis shows that C-S-H 1.0 and C-S-H 1.6 have porosities 69.2% and 49.8% respectively. Pore size distribution also reveals that C-S-H 1.0 has pore size range between 0-250 nm and C-S-H 1.6 between 0-100 nm. The pore network's size of C-S-H 1.0 is significantly larger than 1.6. This study illustrates the capability of using electron tomography to determine the 3D nanoscale structure of cementitious products and to distinguish between C-S-H 1.0 and 1.6.

42 ENGINEERING↗
DOE OSTI2020

Polyethylene Terephthalate Deconstruction Catalyzed by a Carbon‐Supported Single‐Site Molybdenum‐Dioxo Complex

Abstract Polyethylene terephthalate (PET) is selectively depolymerized by a carbon‐supported single‐site molybdenum‐dioxo catalyst to terephthalic acid (PTA) and ethylene. The solventless reactions are most efficient under 1 atmosphere of H 2 . The catalyst exhibits high stability and can be recycled multiple times without loss of activity. Waste beverage bottle PET or a PET + polypropylene (PP) mixture (simulating the bottle + cap) proceeds at 260 °C with complete PET deconstruction and quantitative PTA isolation. Mechanistic studies with a model diester, 1,2‐ethanediol dibenzoate, suggest the reaction proceeds by initial retro‐hydroalkoxylation/β‐C−O scission and subsequent hydrogenolysis of the vinyl benzoate intermediate.

Kratish, Yosi↗
DOE OSTI2020

Composite Structured Surfaces for Durable Dropwise Condensation

Dropwise condensation of steam on hydrophobic substrates has a 10X higher heat transfer coefficient compared to filmwise condensation. To promote dropwise condensation, low surface energy hydrophobic coatings (polymers) are typically utilized. The low intrinsic thermal conductivity (k < 1 W/(m · K)) of polymers, coupled with high heat transfer coefficient of dropwise condensation (100 kW/(m 2 · K)), necessitates that the coating be thin (< 1µm) in order to avoid reducing the overall heat exchanger conductance. However, thin polymeric films easily degrade. The two opposing requirements result in the need for optimization between the durability (thick coating) and the heat transfer (thin coating). To enable high thermal conductivity in thicker coatings, we develop metal-polymer structured surfaces. By using porous structures as inter-connected heat-conducting backbones that are filled with hydrophobic materials, we enable tuning of the coating effective thermal conductivity and surface energy. Three metal structures were studied; micro/nanowires, inverse opals, and sintered spheres. Heat transfer performance was calculated using three-dimensional finite element method simulations with two distinct boundary conditions; convection at the walls and isothermal walls. Interestingly, the overall conductance shows up to 40% difference depending on the boundary condition used in calculating the composite coating effective thermal conductivity. We use our model to predict the heat transfer performance as a function of metal fraction by volume and by surface area for condensation. By coupling our thermal simulations with a previously verified analytical model for predicting wetting behavior on heterogeneous surfaces, we propose a regime map to predict dropwise-to-filmwise transition. Furthermore, our work not only forms a starting point for the development of durable dropwise condensing surfaces, it identifies important considerations needed for computing effective thermal conductivity of composites.

42 ENGINEERING↗