Engineering Papers⌕ Search

Engineering topics

Li, Jian

Publications and source records attributed to Li, Jian.

At least 73 records · Page 4

Higher-Order Topology, Monopole Nodal Lines, and the Origin of Large Fermi Arcs in Transition Metal Dichalcogenides XTe 2 ( X =Mo,W )

In recent years, transition metal dichalcogenides (TMDs) have garnered great interest as topological materials. In particular, monolayers of centrosymmetric β-phase TMDs have been identified as 2D topological insulators (TIs), and bulk crystals of noncentrosymmetric γ-phase MoTe 2 and WTe 2 have been identified as type-II Weyl semimetals. However, angle-resolved photoemission spectroscopy and STM probes of these semimetals have revealed huge, arclike surface states that overwhelm, and are sometimes mistaken for, the much smaller topological surface Fermi arcs of bulk type-II Weyl points. In this Letter, we calculate the bulk and surface electronic structure of both β- and γ-MoTe 2 . We find that β-MoTe 2 is, in fact, a $\mathbb Z_4$-nontrivial higher-order TI (HOTI) driven by double band inversion and exhibits the same surface features as γ-MoTe 2 and γ-WTe 2 . Further, we discover that these surface states are not topologically trivial, as previously characterized by the research that differentiated them from the Weyl Fermi arcs but, rather, are the characteristic split and gapped fourfold Dirac surface states of a HOTI. In β-MoTe 2 , this indicates that it would exhibit helical pairs of hinge states if it were bulk insulating, and in γ-MoTe 2 and γ-WTe 2 , these surface states represent vestiges of HOTI phases without inversion symmetry that are nearby in parameter space. Using nested Wilson loops and first-principles calculations, we explicitly demonstrate that, when the Weyl points in γ-MoTe 2 are annihilated, which may be accomplished by symmetry-preserving strain or lattice distortion, γ-MoTe 2 becomes a nonsymmetry-indicated, noncentrosymmetric HOTI. We also show that, when the effects of spin-orbit coupling are neglected, β-MoTe 2 is a nodal-line semimetal with $\mathbb Z_2$-nontrivial monopole nodal lines (MNLSM). This finding confirms that MNLSMs driven by double band inversion are the weak-spin-orbit coupling limit of HOTIs, implying that MNLSMs are higher-order topological semimetals with flat-band-like hinge states, which we find to originate from the corner modes of 2D “fragile” TIs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evaluation of Cr-Tolerance of the Sr 2 Fe 1.5 Mo 0.5 O 6-δ Cathode for Solid Oxide Fuel Cells

Sr 2 Fe 1.5 Mo 0.5 O 6-δ (SFM) is a promising electrode material recently studied for intermediate temperature solid oxide fuel cells (IT-SOFCs). In this work, Cr-tolerance of SFM has been systematically assessed. Due to the presence of Sr at the A-site, SFM has been found to be vulnerable to Cr species resulted from the metallic interconnects. The main product of Cr-poisoning for SFM is SrCrO 4 deposited on the SFM surface. Furthermore, the Cr-poisoning mechanism of the SFM material has been evaluated both experimentally and thermodynamically. To enhance Cr-tolerance of SFM, LaCoO 3-δ -infiltrated SFM (LC@SFM) has been developed. LC hinders the direct contact of SFM with Cr species and LC@SFM has significantly enhanced Cr-tolerance than SFM. This study provides valuable guidance for the wide application of SFM cathode in IT-SOFCs.

36 MATERIALS SCIENCE↗

LaCoO 3-δ coated Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3-δ cathode for intermediate temperature solid oxide fuel cells

Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3-δ (BSCF) is a promising cathode for intermediate temperature solid oxide fuel cells. Yet, BSCF cathode performance stability has been a challenge and its electrochemical performance deteriorates severely in the presence of Cr2O3-forming metallic interconnect. We demonstrate that LaCoO 3-δ (LC) coating on BSCF cathode can not only enhance BSCF electrochemical performance, but also effectively improve the BSCF performance stability. Here, LC-coated BSCF-Gd 0.1 Ce 0.9 O 1.9 (LC@BSCF-GDC) cathode is prepared through a solution impregnation method and systematically characterized. EIS, XRD, Raman, SEM and EDS tests with and without SUS430 interconnect are conducted to characterize the Cr-tolerance. The results reflect that BSCF-GDC cathode is susceptible to Cr poisoning while LC@BSCF-GDC cathode has significantly enhanced tolerance to Cr poisoning. Single cells with LC@BSCF-GDC cathode achieve higher peak power density and smaller polarization resistance values than that of single cells with BSCF-GDC cathode. Furthermore, significant improvement of performance stability under a constant current load has been achieved for single cells with LC@BSCF-GDC cathode. This work provides a new solution for solving BSCF cathode performance stability.

25 ENERGY STORAGE↗

ACAP1 assembles into an unusual protein lattice for membrane deformation through multiple stages

Studies on the Bin-Amphiphysin-Rvs (BAR) domain have advanced a fundamental understanding of how proteins deform membrane. We previously showed that a BAR domain in tandem with a Pleckstrin Homology (PH domain) underlies the assembly of ACAP1 (Arfgap with Coil-coil, Ankryin repeat, and PH domain I) into an unusual lattice structure that also uncovers a new paradigm for how a BAR protein deforms membrane. Here, we initially pursued computation-based refinement of the ACAP1 lattice to identify its critical protein contacts. Simulation studies then revealed how ACAP1, which dimerizes into a symmetrical structure in solution, is recruited asymmetrically to the membrane through dynamic behavior. We also pursued electron microscopy (EM)-based structural studies, which shed further insight into the dynamic nature of the ACAP1 lattice assembly. As ACAP1 is an unconventional BAR protein, our findings broaden the understanding of the mechanistic spectrum by which proteins assemble into higher-ordered structures to achieve membrane deformation.

59 BASIC BIOLOGICAL SCIENCES↗

Observation of a Majorana zero mode in a topologically protected edge channel

Superconducting proximity pairing in helical edge modes, such as those of topological insulators, is predicted to provide a unique platform for realizing Majorana zero modes (MZMs). We used scanning tunneling microscopy measurements to probe the influence of proximity-induced superconductivity and magnetism on the helical hinge states of bismuth(111) films grown on a superconducting niobium substrate and decorated with magnetic iron clusters. Consistent with model calculations, our measurements revealed the emergence of a localized MZM at the interface between the superconducting helical edge channel and the iron clusters, with a strong magnetization component along the edge. Our experiments also resolve the MZM’s spin signature, which distinguishes it from trivial in-gap states that may accidentally occur at zero energy in a superconductor.

Science & Technology - Other Topics↗

In Situ Loading and Delivery of Short Single- and Double-Stranded DNA by Supramolecular Organic Frameworks

Short DNA represents an important class of biomacromolecules that are widely applied in gene therapy, editing, and modulation. However, the development of simple and reliable methods for their intracellular delivery remains a challenge. Herein, we describe that seven water-soluble, homogeneous supramolecular organic frameworks (SOFs) with a well-defined pore size and high stability in water that can accomplish in situ inclusion of single-stranded (ss) and double-stranded (ds) DNA (21, 23, and 58 nt) and effective intracellular delivery (including two noncancerous and six cancerous cell lines). Fluorescence quenching experiments for single and double end-labeled ss- and ds-DNA support that the DNA sequences can be completely enveloped by the SOFs. Confocal laser scanning microscopy and flow cytometry reveal that five of the SOFs exhibit excellent delivery efficiencies that, in most of the studied cases, outperform the commercial standard Lipo2000, even at low SOF–nucleic acid ratios. In addition to high delivery efficiencies, the water-soluble, self-assembled SOF carriers have a variety of advantages, including convenient preparation, high stability, and in situ DNA inclusion, which are all critical for practical applications in nucleic acid delivery.

59 BASIC BIOLOGICAL SCIENCES↗

Efficient Blue Phosphorescent OLEDs with Improved Stability and Color Purity through Judicious Triplet Exciton Management

Abstract Highly efficient and stable blue phosphorescent organic light‐emitting diodes are achieved by employing a step‐wise graded doping of platinum(II) 9‐(pyridin‐2‐yl)‐2‐(9‐(pyridin‐2‐yl)‐9 H ‐carbazol‐2‐yloxy)‐9 H ‐carbazole (PtNON) in a device setting. A device employing PtNON demonstrates a high peak external quantum efficiency (EQE) of 17.4% with an estimated LT 70 lifetime of over 1330 h at a brightness of 1000 cd m −2 . PtNON is then investigated as a “triplet sensitizer” in an alternating donor–acceptor doped emissive layer to further improve the device emission color purity by carefully managing an efficient Förster resonant energy transfer from PtNON to 2,5,8,11‐tetra‐ tert ‐butylperylene as a selected acceptor material. Thus, such OLED devices demonstrate an EQE of 16.9% with color coordinates of (0.16, 0.25) and an estimated luminance (LT 70 ) lifetime of 628 h at a high brightness of 1000 cd m −2 .

Klimes, Kody↗

Analysis of the Effect of Vehicle Platooning on the Optimal Control of a Heavy Duty Engine Thermal System

One promising method for reducing fuel consumption and emissions, particularly in heavy duty trucks, is platooning. As the distance between vehicles decreases, the following vehicles will experience less aerodynamic drag on the front of the vehicle. However, reducing the velocity of the air contacting the front of the vehicle could have adverse effects on the temperature of the engine. To compensate for this effect, the energy consumption of the engine cooling system might increase, ultimately limiting the overall improvements obtained with platooning. Understanding the coupling between drag reduction and engine cooling load requirement is key for successfully implementing platooning strategies. Additionally, in a Connected and Automated Vehicle (CAV) environment, where information of the future engine load becomes available, the operation of the cooling system can be optimized in order to achieve the maximum fuel consumption reduction. In this paper, a control-oriented physics-based model for the engine cooling loop of a Volvo engine is developed and validated against road data. Starting from the validated model, an optimal control problem for the coolant system is formulated considering the tradeoff between the tracking of the engine temperature setpoint and the corresponding fuel consumption under different trailing distances. To compare the coolant system performance, Dynamic Programming (DP) is used to determine the global optimal solution for the coolant system actuator. The coupling between optimal cooling system operation and reduction in ram air are evaluated by comparing the results obtained from the DP under different platooning conditions against the unrestricted scenario. In addition, the paper analyzes the changes in the tradeoff between fuel consumption and setpoint tracking for different vehicle distances. This analysis will provide useful insight on the sensitivity of the coolant system controller calibration to the platoon distance.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

OptRAM: In-silico strain design via integrative regulatory-metabolic network modeling

The ultimate goal of metabolic engineering is to produce desired compounds on an industrial scale in a cost effective manner. To address challenges in metabolic engineering, computational strain optimization algorithms based on genome-scale metabolic models have increasingly been used to aid in overproducing products of interest. However, most of these strain optimization algorithms utilize a metabolic network alone, with few approaches providing strategies that also include transcriptional regulation. Moreover previous integrated approaches generally require a pre-existing regulatory network. In this study, we developed a novel strain design algorithm, named OptRAM (Optimization of Regulatory And Metabolic Networks), which can identify combinatorial optimization strategies including overexpression, knockdown or knockout of both metabolic genes and transcription factors. OptRAM is based on our previous IDREAM integrated network framework, which makes it able to deduce a regulatory network from data. OptRAM uses simulated annealing with a novel objective function, which can ensure a favorable coupling between desired chemical and cell growth. The other advance we propose is a systematic evaluation metric of multiple solutions, by considering the essential genes, flux variation, and engineering manipulation cost. We applied OptRAM to generate strain designs for succinate, 2,3-butanediol, and ethanol overproduction in yeast, which predicted high minimum predicted target production rate compared with other methods and previous literature values. Moreover, most of the genes and TFs proposed to be altered by OptRAM in these scenarios have been validated by modification of the exact genes or the target genes regulated by the TFs, for overproduction of these desired compounds by in vivo experiments cataloged in the LASER database. Particularly, we successfully validated the predicted strain optimization strategy for ethanol production by fermentation experiment. As a result, OptRAM can provide a useful approach that leverages an integrated transcriptional regulatory network and metabolic network to guide metabolic engineering applications.

59 BASIC BIOLOGICAL SCIENCES↗

Highly Efficient Blue OLEDs Based on Metal‐Assisted Delayed Fluorescence Pd(II) Complexes

Abstract A series of metal‐assisted delayed fluorescence (MADF) palladium(II) complexes, PdN1N, PdN1N‐dm, and PdN6N, are studied. Their 77 K photoluminescence emission spectra show a narrow primary emission peak at 464, 466, and 470 nm, respectively, with small vibronic peaks characteristic of many phosphorescent emitters. At room temperature (300 K), the dominant emission peaks for PdN1N, PdN1N‐dm, and PdN6N are slightly redshifted to 472, 470, and 476 nm, respectively. In the meantime, a broad sideband is also shown between 410 and 450 nm due to the MADF process. A blue device employing PdN1N‐dm demonstrates an electroluminescence emission peak at 476 nm and the maximum external quantum efficiency (EQE) of 25.1%. The high maximum EQE of the blue organic light‐emitting diode (OLED) device indicates that both the phosphorescence and the delayed fluorescence are very efficient. In addition, a stable OLED device of PdN1N‐dm gives a maximum EQE of 9.8% and the estimated operational lifetime LT 70 of 350 h at the practical luminance of 100 cd m −2 .

Zhu, Zhi‐Qiang↗

The clustering of galaxies in the completed SDSS-III Baryon Oscillation Spectroscopic Survey: a tomographic measurement of structure growth and expansion rate from anisotropic galaxy clustering in Fourier space

In this study, we perform a tomographic structure growth and expansion rate analysis using the monopole, quadrupole and hexadecapole of the redshift-space galaxy power spectrum derived from the Sloan Digital Sky Survey (SDSS-III) Baryon Oscillation Spectroscopic Survey (BOSS) Data Release 12 combined sample, which covers the redshift range of 0.20 < $z$ < 0.75. By allowing for overlap between neighbouring redshift slices in order to extract information on the light-cone, we successfully obtain joint BAO and RSD constraints with a precision of 2-3 per cent for D A , 3-10 per cent for H and 9-12 per cent for fσ 8 with a redshift resolution of $Δz$ ~ 0.04. Our measurement is consistent with that presented in Wang et al., where the analysis is performed in configuration space. Finally, we apply our measurement to constrain the Em>f(R) gravity model, and find that the 95 per cent CL upper limit of log 10 B 0 can be reduced by 11 per cent by our tomographic BAO and RSD measurements.

79 ASTRONOMY AND ASTROPHYSICS↗

Effect of Annealing on the Microstructure and Properties of Electron Beam Welded 4J34 Kovar Alloy

Electron beam welding of 4J34 Kovar alloy was conducted, and the microstructure and mechanical properties of the joints in as-welded and postweld annealing treatment (PWAT) states were investigated. The martensitic transformation occurred and led to the generation of α lath martensite due to the rapid cooling in the as-welded condition. After annealing treatment, part of the α martensite transformed to γ austenite and subsequently developed the bulk γ phase and α/γ lamellar microstructures in the fusion zone (FZ) of the postwelded joint. Grains in the heat-affected zone (HAZ) clearly developed and penetrated into the FZ, causing the disappearance of the fusion line between the FZ and the HAZ. All the joints in both the as-welded and PWAT conditions exhibited ductile fracture. The maximum tensile strength of 505 MPa was obtained in the as-welded joint with the welding speed of 150 mm/min. The linear expansion coefficients of the joint and base metal decreased with the increase in temperature. However, the decreasing rate of PWAT joints was lower than that of the as-welded joints.

36 MATERIALS SCIENCE↗

Quantifying the inter- and intra-granular stresses and their effects on deformation behaviors for the polycrystalline hexagonal beryllium by neutron diffraction

Highlights: • The inter- and intra-granular stresses are quantified for the polycrystalline hexagonal metal beryllium. • Composite behavior of the internal stresses is revealed in the polycrystalline beryllium. • Those internal stresses show the obvious grain-orientation dependence. • Those stresses can be significantly tuned by the temperature and strain rate effects. • The dislocation slip and twinning are quantified together with the inter- and intra-granular stored energies. - Abstract: The internal stresses developing at different length scales play the important role in materials performance. This importance has been well recognized for the cubic metals, however, not for the hexagonal close-packed (hcp) ones. The present work investigates the intergranular and intragranular stresses in the polycrystalline hexagonal beryllium by neutron diffraction. The correlation between those internal stresses and the deformation mechanism is revealed, and the strain rate and temperature effects on those stresses are presented. A composite behavior of intergranular and intragranular stresses is observed, which can be significantly tuned by the temperature and strain rate effects. The intergranular stress and stored energy are large for the soft-oriented grains (SOGs), while the intragranular stress and stored energy are large for the hard-oriented ones (HOGs). Both of those stresses are significantly high for the dynamic strain rate while they are relatively low for the elevated temperature. The large internal stresses in the dynamically compressed specimen should be attributed to the large number of twins and high density of dislocations. Different HOGs-SOGs configurations are proposed on the light of those observations, which might facilitate the properties controlling and extend the application scope for the hcp metal beryllium.

36 MATERIALS SCIENCE↗

The clustering of the SDSS-IV extended Baryon Oscillation Spectroscopic Survey DR14 quasar sample: a tomographic measurement of cosmic structure growth and expansion rate based on optimal redshift weights

We develop a new method, which is based on the optimal redshift weighting scheme, to extract the maximal tomographic information of baryonic acoustic oscillations (BAO) and redshift space distortions (RSD) from the extended Baryon Oscillation Spectroscopic Survey (eBOSS) Data Release 14 quasar (DR14Q) survey. We validate our method using the Extended Zel’dovich mocks, and apply our pipeline to the eBOSS DR14Q sample in the redshift range of 0.8 < z < 2.2. We report a joint measurement of fσ8 and two-dimensional BAO parameters D A and H at four effective redshifts of z eff = 0.98, 1.23, 1.52, and 1.94, and provide the full data covariance matrix. Using our measurement combined with BOSS DR12, Main Galaxy Sample (MGS), and 6 degree Field Galaxy Survey (6dFGS) BAO measurements, we find that the existence of dark energy is supported by observations at a 7.4σ significance level. Combining our measurement with BOSS DR12 and Planck observations, we constrain the gravitational growth index to be γ = 0.580 ± 0.082, which is fully consistent with the prediction of general relativity. This paper is part of a set that analyses the eBOSS DR14 quasar sample.

79 ASTRONOMY AND ASTROPHYSICS↗

Efficient thermal management of Li-ion batteries with a passive interfacial thermal regulator based on a shape memory alloy [A passive interfacial thermal regulator based on shape memory alloy and its application to battery thermal management]

The poor performance of lithium-ion batteries in extreme temperatures is hindering their wider adoption in the energy sector. A fundamental challenge in battery thermal management systems (BTMSs) is that hot and cold environments pose opposite requirements: thermal transmission at high temperature for battery cooling, and thermal isolation at low temperature to retain the batteries’ internally generated heat, leading to an inevitable compromise of either hot or cold performances. Here, we demonstrate a thermal regulator that adjusts its thermal conductance as a function of the temperature, just as desired for the BTMS. Without any external logic control, this thermal regulator increases battery capacity by a factor of 3 at an ambient temperature (T ambient ) of -20 °C in comparison to a baseline BTMS that is always thermally conducting, while also limiting the battery temperature rise to 5 °C in a very hot environment (T ambient = 45 °C) to ensure safety. The result expands the usability of lithium-ion batteries in extreme environments and opens up new applications of thermally functional devices.

25 ENERGY STORAGE↗