Engineering topics

Li, Guang

Publications and source records attributed to Li, Guang.

At least 19 records

DOE OSTI2018

RGO/BaFe12O19/Fe3O4 nanocomposite as microwave absorbent with lamellar structures and improved polarization interfaces

Highlights: • RGO/BaFe{sub 12}O{sub 19}/Fe{sub 3}O{sub 4} nanocomposite are prepared via a two-step solvothermal method. • The maximum reflection loss can reach −46.04 dB, and the effective absorption bandwidth under −10 dB is 5.68 GHz. • Interfacial polarization as one of the mechanism for the enhanced absorption properties was detailedly analyzed. - Abstract: In this paper, we designed and prepared a composite of BaFe{sub 12}O{sub 19} (BFO) flakes, two-dimensional graphene and Fe{sub 3}O{sub 4} nanoparticles using a two-step solvothermal method. The combination of BFO flakes and two-dimensional graphene could effectively enhance the heterointerface and is believed to be favorable to enhance the interface polarization. The introduction of inverse spinel Fe{sub 3}O{sub 4} as the third phase could increase the saturated magnetization. The phase structure, morphology, magnetic properties and electromagnetic wave absorption performance of the as-prepared samples were characterized. Due to the enhanced interfacial polarization between the BaFe{sub 12}O{sub 19} flakes and graphene, the composite of RGO/BaFe{sub 12}O{sub 19}/Fe{sub 3}O{sub 4} exhibits excellent microwave absorption properties. The maximum reflection loss can reach -46.04 dB at 15.6 GHz with a thickness of 1.8 mm, and the effective absorption bandwidth reaches 5.68 GHz (from 11.60 GHz to 17.28 GHz). It is believed that the RGO/BaFe{sub 12}O{sub 19}/Fe{sub 3}O{sub 4} composites can find potential application in the field of microwave absorption due to their excellent absorption properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2018

Facile morphology controllable synthesis of PtPd nanorods on graphene-multiwalled carbon nanotube hybrid support as efficient electrocatalysts for oxygen reduction reaction

Highlights: • G–M hybrid was prepared by a novel modified Hummers method followed by thermal annealing. • G–M was verified to be more efficient as the electrocatalyst support compared with G. • Ultrathin PtPd alloy nanorods were supported on the G–M hybrid. • The electrochemical activity of PtPd NRs/G–M outperforms the commercial Pt/C. - Abstract: One-dimensional (1D) anisotropic platinum-based nanorods are particularly attractive electrocatalysts for oxygen reduction reaction (ORR) owing to the inherent structural advantages. In this work, we report the growth of ultrathin PtPd alloy nanorods (3–4 nm) on Graphene-Multiwalled carbon nanotube (G–M) hybrid support via a facile surfactant-free and template-free method as the efficient electrocatalyst for ORR. The as-synthesized PtPd NRs/G–M catalyst exhibits more excellent activity and better durability toward ORR than Pt NRs/G and Pt NRs/G–M catalysts. Noteworthily, it shows an outstanding half-wave potential of 0.810 V and mass activity of 49.5 mA mg{sup –1} at 0.85 V, which are 30 mV and 2.1 times higher than those of commercial 40 wt% Pt/C (JM40) catalyst, respectively. After the accelerated durability tests (ADTs), it also maintains superior stability than JM40. The superior performance is attributed to the combination of the advantageous 1D morphological motif and the synergistic effect with G–M support.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2018

Enhanced proton conductivity and dimensional stability of proton exchange membrane based on sulfonated poly(arylene ether sulfone) and graphene oxide

Highlights: • Proton conductivity of SPAES-GO-x membranes enhanced with increasing GO content. • Incorporating GO into SPAES matrix restrained SPAES-GO-x membranes swelling. • GO promoted the sulfonic acid groups of SPAES molecular chain aggregation (big ionic clusters) to enhance proton transport. - Abstract: A series composited membranes of sulfonated poly(arylene ether sulfone) and graphene oxide (SPAES-GO-x) have been exploited as proton exchange membrane. The properties of SPAES-GO-x membranes were evaluated including proton conductivity, water uptake, swelling ratio, oxide and thermal stability. Incorporating GO into SPAES matrix restrained the composite membranes swelling and enhanced their proton conductivity. The SPAES-GO-3% membrane showed a conductivity value of 0.183 S cm{sup −1} at 120 °C and relative humidity 100%. Compared with the pristine SPAES membrane, the swelling ratio of SPAES-GO-2% membrane was reduced by 55.7% at 90 °C. Small-Angle X-ray Scattering (SAXS) revealed GO promoted SPAES molecular chain movement to form bigger ionic clusters in favor of enhancing proton transport. X-Ray Diffraction and Field Emission Scanning Electron Microscope (XRD and FE-SEM) analysis further demonstrated GO was exfoliated and distributed throughout the SPAES matrix. These results indicated GO was an effective filler to trade off proton conductivity and swelling of composite membrane.

36 MATERIALS SCIENCE↗

DOE OSTI2018

Tr1 responses are elevated in asymptomatic H. pylori-infected individuals and are functionally impaired in H. pylori-gastric cancer patients

Gastric cancer is one of the most lethal malignancies worldwide. Chronic Helicobacter pylori (H. pylori) infection can induce an inflammatory response that promotes atrophic gastritis, a preceding event to cancer development. The type 1 regulatory T (Tr1) cells have recently emerged as a critical participant in maintaining self-tolerance. In this study, we examined Tr1 cells in H. pylori infection and gastric cancer development. While H. pylori-uninfected (uninfected) subjects presented low Tr1 frequency in the peripheral blood, H. pylori-infected asymptomatic (infected) individuals and H. pylori-infected gastric cancer (cancer) individuals both presented elevated Tr1 frequency. Although the Tr1 cells from infected asymptomatic subjects were functionally more potent than those from uninfected healthy subjects, the Tr1 cells in cancer individuals demonstrated several functional impairments, such as reduced interleukin 10 (IL-10) expression, lower secretion of cytolytic factors including granzyme B and perforin, and lower capacity to suppress CD4{sup +}CD25{sup -} T cell and CD8{sup +} T cell proliferation. In addition, the frequency and function of Tr1 cells were positively correlated with the disease-free survival of the gastric cancer patients. These results suggest that Tr1 cells might be involved in the regulating immune responses in H. pylori infection and gastric cancer development. The fact that Tr1 cells could suppress inflammation and produce cytotoxic molecules at the same time has made them attractive potential candidates for future immunotherapies.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2017

Novel Super-Resolution Approach to Time-Resolved Volumetric 4-Dimensional Magnetic Resonance Imaging With High Spatiotemporal Resolution for Multi-Breathing Cycle Motion Assessment

Purpose: To develop and evaluate a super-resolution approach to reconstruct time-resolved 4-dimensional magnetic resonance imaging (TR-4DMRI) with a high spatiotemporal resolution for multi-breathing cycle motion assessment. Methods and Materials: A super-resolution approach was developed to combine fast 3-dimensional (3D) cine MRI with low resolution during free breathing (FB) and high-resolution 3D static MRI during breath hold (BH) using deformable image registration. A T1-weighted, turbo field echo sequence, coronal 3D cine acquisition, partial Fourier approximation, and SENSitivity Encoding parallel acceleration were used. The same MRI pulse sequence, field of view, and acceleration techniques were applied in both FB and BH acquisitions; the intensity-based Demons deformable image registration method was used. Under an institutional review board–approved protocol, 7 volunteers were studied with 3D cine FB scan (voxel size: 5 × 5 × 5 mm{sup 3}) at 2 Hz for 40 seconds and a 3D static BH scan (2 × 2 × 2 mm{sup 3}). To examine the image fidelity of 3D cine and super-resolution TR-4DMRI, a mobile gel phantom with multi-internal targets was scanned at 3 speeds and compared with the 3D static image. Image similarity among 3D cine, 4DMRI, and 3D static was evaluated visually using difference image and quantitatively using voxel intensity correlation and Dice index (phantom only). Multi-breathing-cycle waveforms were extracted and compared in both phantom and volunteer images using the 3D cine as the references. Results: Mild imaging artifacts were found in the 3D cine and TR-4DMRI of the mobile gel phantom with a Dice index of >0.95. Among 7 volunteers, the super-resolution TR-4DMRI yielded high voxel-intensity correlation (0.92 ± 0.05) and low voxel-intensity difference (<0.05). The detected motion differences between TR-4DMRI and 3D cine were −0.2 ± 0.5 mm (phantom) and −0.2 ± 1.9 mm (diaphragms). Conclusion: Super-resolution TR-4DMRI has been reconstructed with adequate temporal (2 Hz) and spatial (2 × 2 × 2 mm{sup 3}) resolutions. Further TR-4DMRI characterization and improvement are necessary before clinical applications. Multi-breathing cycles can be examined, providing patient-specific breathing irregularities and motion statistics for future 4D radiation therapy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

DOE OSTI2016

A Novel Respiratory Motion Perturbation Model Adaptable to Patient Breathing Irregularities

Purpose: To develop a physical, adaptive motion perturbation model to predict tumor motion using feedback from dynamic measurement of breathing conditions to compensate for breathing irregularities. Methods and Materials: A novel respiratory motion perturbation (RMP) model was developed to predict tumor motion variations caused by breathing irregularities. This model contained 2 terms: the initial tumor motion trajectory, measured from 4-dimensional computed tomography (4DCT) images, and motion perturbation, calculated from breathing variations in tidal volume (TV) and breathing pattern (BP). The motion perturbation was derived from the patient-specific anatomy, tumor-specific location, and time-dependent breathing variations. Ten patients were studied, and 2 amplitude-binned 4DCT images for each patient were acquired within 2 weeks. The motion trajectories of 40 corresponding bifurcation points in both 4DCT images of each patient were obtained using deformable image registration. An in-house 4D data processing toolbox was developed to calculate the TV and BP as functions of the breathing phase. The motion was predicted from the simulation 4DCT scan to the treatment 4DCT scan, and vice versa, resulting in 800 predictions. For comparison, noncorrected motion differences and the predictions from a published 5-dimensional model were used. Results: The average motion range in the superoinferior direction was 9.4 ± 4.4 mm, the average ΔTV ranged from 10 to 248 mm{sup 3} (−26% to 61%), and the ΔBP ranged from 0 to 0.2 (−71% to 333%) between the 2 4DCT scans. The mean noncorrected motion difference was 2.0 ± 2.8 mm between 2 4DCT motion trajectories. After applying the RMP model, the mean motion difference was reduced significantly to 1.2 ± 1.8 mm (P=.0018), a 40% improvement, similar to the 1.2 ± 1.8 mm (P=.72) predicted with the 5-dimensional model. Conclusions: A novel physical RMP model was developed with an average accuracy of 1.2 ± 1.8 mm for interfraction motion prediction, similar to that of a published lung motion model. This physical RMP was analytically derived and is able to adapt to breathing irregularities. Further improvement of this RMP model is under investigation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

DOE OSTI2015

Novel spirometry based on optical surface imaging

Purpose: To evaluate the feasibility of using optical surface imaging (OSI) to measure the dynamic tidal volume (TV) of the human torso during free breathing. Methods: We performed experiments to measure volume or volume change in geometric and deformable phantoms as well as human subjects using OSI. To assess the accuracy of OSI in volume determination, we performed experiments using five geometric phantoms and two deformable body phantoms and compared the values with those derived from geometric calculations and computed tomography (CT) measurements, respectively. To apply this technique to human subjects, an institutional review board protocol was established and three healthy volunteers were studied. In the human experiment, a high-speed image capture mode of OSI was applied to acquire torso images at 4–5 frames per second, which was synchronized with conventional spirometric measurements at 5 Hz. An in-house MATLAB program was developed to interactively define the volume of interest (VOI), separate the thorax and abdomen, and automatically calculate the thoracic and abdominal volumes within the VOIs. The torso volume change (TV C = ΔV{sub torso} = ΔV{sub thorax} + ΔV{sub abdomen}) was automatically calculated using full-exhalation phase as the reference. The volumetric breathing pattern (BP{sub v} = ΔV{sub thorax}/ΔV{sub torso}) quantifying thoracic and abdominal volume variations was also calculated. Under quiet breathing, TVC should equal the tidal volume measured concurrently by a spirometer with a conversion factor (1.08) accounting for internal and external differences of temperature and moisture. Another MATLAB program was implemented to control the conventional spirometer that was used as the standard. Results: The volumes measured from the OSI imaging of geometric phantoms agreed with the calculated volumes with a discrepancy of 0.0% ± 1.6% (range −1.9% to 2.5%). In measurements from the deformable torso/thorax phantoms, the volume differences measured using OSI imaging and CT imaging were 1.2% ± 2.1% (range −0.5% to 3.6%), with a linear regression fitting (slope = 1.02 and R{sup 2} = 0.999). In volunteers, the relative error in OSI tidal volume measurement was −2.2% ± 4.9% (range −9.2% to 4.8%) and a correlation of r = 0.98 was found with spirometric measurement. The breathing pattern values of the three volunteers were substantially different from each other (BP{sub v} = 0.15, 0.45, and 0.32). Conclusions: This study demonstrates the feasibility of using OSI to measure breathing tidal volumes and breathing patterns with adequate accuracy. This is the first time that dynamic breathing tidal volume as well as breathing patterns is measured using optical surface imaging. The OSI-observed movement of the entire torso could serve as a new respiratory surrogate in the treatment room during radiation therapy.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2015

Significant accumulation of persistent organic pollutants and dysregulation in multiple DNA damage repair pathways in the electronic-waste-exposed populations

Electronic waste (e-waste) has created a worldwide environmental and health problem, by generating a diverse group of hazardous compounds such as persistent organic pollutants (POPs). Our previous studies demonstrated that populations from e-waste exposed region have a significantly higher level of chromosomal aberrancy and incidence of DNA damage. In this study, we further demonstrated that various POPs persisted at a significantly higher concentration in the exposed group than those in the unexposed group. The level of reactive oxygen species and micronucleus rate were also significantly elevated in the exposed group. RNA sequencing analysis revealed 31 genes in DNA damage responses and repair pathways that were differentially expressed between the two groups (Log 2 ratio >1 or <−1). Our data demonstrated that both females and males of the exposed group have activated a series of DNA damage response genes; however many important DNA repair pathways have been dysregulated. Expressions of NEIL1/3 and RPA3, which are critical in initiating base pair and nucleotide excision repairs respectively, have been downregulated in both females and males of the exposed group. In contrast, expression of RNF8, an E3 ligase involved in an error prone non-homologous end joining repair for DNA double strand break, was upregulated in both genders of the exposed group. The other genes appeared to be differentially expressed only when the males or females of the two groups were compared respectively. Importantly, the expression of cell cycle regulatory gene CDC25A that has been implicated in multiple kinds of malignant transformation was significantly upregulated among the exposed males while downregulated among the exposed females. In conclusion, our studies have demonstrated significant correlations between e-waste disposing and POPs accumulation, DNA lesions and dysregulation of multiple DNA damage repair mechanisms in the residents of the e-waste exposed region. - Highlights: • We compared concentration of POPs, ROS and micronucleus rate in POPs exposed area. • Significant accumulation of POPs homologous in the e-waste exposed residents. • DNA damage and DNA damage repair pathways have been differentially activated. • Females and males in the exposed group have different responses to the DNA damage. • Exposed males may be more prone to undergo malignant transformation.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2015

Mesoporous hollow Zn{sub 2}SiO{sub 4}:Mn{sup 2+} nanospheres: The study of photoluminescence and adsorption properties

Graphical abstract: Mesoporous hollow structure of Zn{sub 2}SiO{sub 4}:Mn{sup 2+} phosphors. - Highlights: • Mesoporous hollow Zn{sub 2}SiO{sub 4}:Mn{sup 2+} nanospheres are prepared via the layer-by-layer technique. • The Zn{sub 2}SiO{sub 4}:Mn{sup 2+} nanospheres exhibit better adsorption capabilities of Pb{sup 2+}, Fe{sup 3+} than Cd{sup 2+}. • The Zn{sub 2}SiO{sub 4}:Mn{sup 2+} nanospheres exhibit strong green emission around 524 nm. • With the increase of doped Mn{sup 2+} concentration, the emission peak shows a red-shift. - Abstract: Mesoporous hollow Zn{sub 2}SiO{sub 4}:Mn{sup 2+} nanospheres were prepared via the layer-by-layer technique using CTAB as surfactant. The structures/microstructures and morphologies of the as-synthesized phosphors were characterized by X-ray diffraction, scanning electron microscope, transmission electron microscope and N{sub 2} adsorption–desorption porosimetry. The adsorption capacity to remove toxic metal ions in water was tested and the results showed that the Zn{sub 2}SiO{sub 4}:Mn{sup 2+} nanospheres exhibited better adsorption capabilities of Pb{sup 2+}, Fe{sup 3+} than Cd{sup 2+}. Moreover, the as-obtained hollow Zn{sub 2}SiO{sub 4}:Mn{sup 2+} phosphors exhibited strong green emission around 524 nm at room temperature. When the atomic ratio of Zn to Mn was 97:3, the emission intensity of Zn{sub 2}SiO{sub 4}:Mn{sup 2+} phosphor was about 1.2 times that of commercial phosphors. Furthermore, with the increase of doped Mn{sup 2+} concentration, the emission peak showed a red-shift.

36 MATERIALS SCIENCE↗

DOE OSTI2014

Rapid estimation of 4DCT motion-artifact severity based on 1D breathing-surrogate periodicity

Purpose: Motion artifacts are common in patient four-dimensional computed tomography (4DCT) images, leading to an ill-defined tumor volume with large variations for radiotherapy treatment and a poor foundation with low imaging fidelity for studying respiratory motion. The authors developed a method to estimate 4DCT image quality by establishing a correlation between the severity of motion artifacts in 4DCT images and the periodicity of the corresponding 1D respiratory waveform (1DRW) used for phase binning in 4DCT reconstruction. Methods: Discrete Fourier transformation (DFT) was applied to analyze 1DRW periodicity. The breathing periodicity index (BPI) was defined as the sum of the largest five Fourier coefficients, ranging from 0 to 1. Distortional motion artifacts (excluding blurring) of cine-scan 4DCT at the junctions of adjacent couch positions around the diaphragm were classified in three categories: incomplete, overlapping, and duplicate anatomies. To quantify these artifacts, discontinuity of the diaphragm at the junctions was measured in distance and averaged along six directions in three orthogonal views. Artifacts per junction (APJ) across the entire diaphragm were calculated in each breathing phase and phase-averaged APJ{sup ¯}, defined as motion-artifact severity (MAS), was obtained for each patient. To make MAS independent of patient-specific motion amplitude, two new MAS quantities were defined: MAS{sup D} is normalized to the maximum diaphragmatic displacement and MAS{sup V} is normalized to the mean diaphragmatic velocity (the breathing period was obtained from DFT analysis of 1DRW). Twenty-six patients’ free-breathing 4DCT images and corresponding 1DRW data were studied. Results: Higher APJ values were found around midventilation and full inhalation while the lowest APJ values were around full exhalation. The distribution of MAS is close to Poisson distribution with a mean of 2.2 mm. The BPI among the 26 patients was calculated with a value ranging from 0.25 to 0.93. The DFT calculation was within 3 s per 1DRW. Correlations were found between 1DRW periodicity and 4DCT artifact severity: −0.71 for MAS{sup D} and −0.73 for MAS{sup V}. A BPI greater than 0.85 in a 1DRW suggests minimal motion artifacts in the corresponding 4DCT images. Conclusions: The breathing periodicity index and motion-artifact severity index are introduced to assess the relationship between 1DRW and 4DCT. A correlation between 1DRW periodicity and 4DCT artifact severity has been established. The 1DRW periodicity provides a rapid means to estimate 4DCT image quality. The rapid 1DRW analysis and the correlative relationship can be applied prospectively to identify irregular breathers as candidates for breath coaching prior to 4DCT scan and retrospectively to select high-quality 4DCT images for clinical motion-management research.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2014

Assessing and accounting for the impact of respiratory motion on FDG uptake and viable volume for liver lesions in free-breathing PET using respiration-suspended PET images as reference

Purpose: To assess and account for the impact of respiratory motion on the variability of activity and volume determination of liver tumor in positron emission tomography (PET) through a comparison between free-breathing (FB) and respiration-suspended (RS) PET images. Methods: As part of a PET/computed tomography (CT) guided percutaneous liver ablation procedure performed on a PET/CT scanner, a patient's breathing is suspended on a ventilator, allowing the acquisition of a near-motionless PET and CT reference images of the liver. In this study, baseline RS and FB PET/CT images of 20 patients undergoing thermal ablation were acquired. The RS PET provides near-motionless reference in a human study, and thereby allows a quantitative evaluation of the effect of respiratory motion on PET images obtained under FB conditions. Two methods were applied to calculate tumor activity and volume: (1) threshold-based segmentation (TBS), estimating the total lesion glycolysis (TLG) and the segmented volume and (2) histogram-based estimation (HBE), yielding the background-subtracted lesion (BSL) activity and associated volume. The TBS method employs 50% of the maximum standardized uptake value (SUV{sub max}) as the threshold for tumors with SUV{sub max} ≥ 2× SUV{sub liver-bkg}, and tumor activity above this threshold yields TLG{sub 50%}. The HBE method determines local PET background based on a Gaussian fit of the low SUV peak in a SUV-volume histogram, which is generated within a user-defined and optimized volume of interest containing both local background and lesion uptakes. Voxels with PET intensity above the fitted background were considered to have originated from the tumor and used to calculate the BSL activity and its associated lesion volume. Results: Respiratory motion caused SUV{sub max} to decrease from RS to FB by −15% ± 11% (p = 0.01). Using TBS method, there was also a decrease in SUV{sub mean} (−18% ± 9%, p = 0.01), but an increase in TLG{sub 50%} (18% ± 36%) and in the segmented volume (47% ± 52%, p = 0.01) from RS to FB PET images. The background uptake in normal liver was stable, 1% ± 9%. In contrast, using the HBE method, the differences in both BSL activity and BSL volume from RS to FB were −8% ± 10% (p = 0.005) and 0% ± 16% (p = 0.94), respectively. Conclusions: This is the first time that almost motion-free PET images of the human liver were acquired and compared to free-breathing PET. The BSL method's results are more consistent, for the calculation of both tumor activity and volume in RS and FB PET images, than those using conventional TBS. This suggests that the BSL method might be less sensitive to motion blurring and provides an improved estimation of tumor activity and volume in the presence of respiratory motion.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2014

Characterization and photocatalytic activity of (ZnO–CuO)/SBA-15 nanocomposites synthesized by two-solvent method

Schematic between charge genenration and transfer for methylene orange degradation simulated by light. - Highlights: • Two-solvent method is used to prepare ZnO–CuO particles embedded in porous SBA-15. • The absorption edge of (ZnO–CuO)/SBA-15 composite is in the visible light regime. • The absorption intensity of the composite in visible light regime is enhanced. • The (ZnO–CuO)/SBA-15 composite has higher photocatalytic ability than Degussa P-25. - Abstract: Two-solvent method was employed to prepare ZnO–CuO nanoparticles embedded in mesoporous silica SBA-15 ((ZnO–CuO)/SBA-15). The as-obtained (ZnO–CuO)/SBA-15 nanocomposites were characterized by X-ray diffraction, transmission electron microscope, X-ray photoelectron spectroscopy, N{sub 2} adsorption porosimetry, and diffusive reflective UV–vis spectroscopy. The photocatalytic activity of (ZnO–CuO)/SBA-15 nanocomposites toward methylene orange was investigated under simulated solar light irradiation, and the measurement results indicated that (ZnO–CuO)/SBA-15 nanocomposites exhibit higher photodegradation activity toward methylene orange than commercial TiO{sub 2} P-25. The photocatalytic activity of (ZnO–CuO)/SBA-15 nanocomposites were found to be dependent on both the adsorption ability of the nanocomposites and the loading dosage of ZnO–CuO nanoparticles in SBA-15. The optimal loading dosage of ZnO–CuO nanoparticles was determined. Too high or too low loading will lower the photodegradation ability of (ZnO–CuO)/SBA-15 nanocomposites.

36 MATERIALS SCIENCE↗

DOE OSTI2014

TiO{sub 2} nanobelts photocatalysts decorated with Bi{sub 2}WO{sub 6} nanocrystals: Preparation and enhanced photocatalytic activity

Highlights: • TiO{sub 2} nanobelts decorated with Bi{sub 2}WO{sub 6} nanocrystals have been prepared. • The introduction of Bi{sub 2}WO{sub 6} nanocrystals can induce red-shift of absorption edge. • The Bi{sub 2}WO{sub 6}/TiO{sub 2} composites show higher photocatalytic activity than TiO{sub 2} nanobelts. • The Bi{sub 2}WO{sub 6}/TiO{sub 2} composites have long-time recyclable ability of photodegradation. - Abstract: In this paper, the controllable preparation of one-dimensional TiO{sub 2} nanobelts decorated with Bi{sub 2}WO{sub 6} nanocrystals based on Ti foils was reported using two-step hydrothermal treatment method. X-ray photoelectron spectroscopy measurement results exhibited the binding energy changes of Ti and O elements, implying the strong adhesion of Bi{sub 2}WO{sub 6} nanocrystals onto the surface of TiO{sub 2} nanobelts. The ultraviolet–visible (UV–vis) absorption spectra showed that the introduction of Bi{sub 2}WO{sub 6} nanocrystals could induce the red-shift of absorption edge and exhibited a broad absorption band in the visible region, which extended the scope of absorption spectrum and help to improve the photocatalytic degradation efficiency. The photocatalytic experiment results revealed that Bi{sub 2}WO{sub 6}/TiO{sub 2} composites possess higher photocatalytic activities toward methyl orange than pure TiO{sub 2} nanobelts. The degradation efficiency of 90% after 5 cycles indicated that the as-prepared composite photocatalysts exhibited excellent long-time recyclable ability for the degradation of contaminants.

36 MATERIALS SCIENCE↗

DOE OSTI2014

Two-solvent method synthesis of SnO{sub 2} nanoparticles embedded in SBA-15: Gas-sensing and photocatalytic properties study

Graphical abstract: Different loadings of SnO{sub 2} nanoparticles embedded in mesoporous silica (sample S1, S2 and S3) show higher response to H{sub 2} at lower operating temperature than pure SnO{sub 2} nanoparticles. - Highlights: • Two-solvent method is firstly used to synthesize SnO{sub 2} nanoparticles embedded in mesoporous silica (SBA-15). • The SnO{sub 2}/SBA-15 nanocomposites show higher response to H{sub 2} at lower operating temperature than pure SnO{sub 2} nanoparticles. • The SnO{sub 2}/SBA-15 nanocomposites have higher photodegradation ability toward methylene blue than pure SnO{sub 2} nanoparticles. - Abstract: Different loadings of SnO{sub 2} nanoparticles embedded in mesoporous silica (SBA-15) were prepared via a two-solvent method with the ordered hexagonal mesoporous structure of SBA-15 kept. X-ray diffraction, transmission electron microscope, X-ray photoelectron spectroscopy and N{sub 2} adsorption porosimetry were employed to characterize the nanocomposites. Compared with pure SnO{sub 2} nanoparticles, the SnO{sub 2}/SBA-15 nanocomposites show higher response to H{sub 2} at lower operating temperature. The photocatalytic activity of as-prepared SnO{sub 2}/SBA-15 for degradation of methylene blue was investigated under UV light irradiation and the results show that the SnO{sub 2}/SBA-15 nanocomposites have higher photodegradation ability toward methylene blue than pure SnO{sub 2} nanoparticles.

36 MATERIALS SCIENCE↗

DOE OSTI2012

A method to provide rapid in situ determination of tip radius in dynamic atomic force microscopy

We provide a method to characterize the tip radius of an atomic force microscopy in situ by monitoring the dynamics of the cantilever in ambient conditions. The key concept is that the value of free amplitude for which transitions from the attractive to repulsive force regimes are observed, strongly depends on the curvature of the tip. In practice, the smaller the value of free amplitude required to observe a transition, the sharper the tip. This general behavior is remarkably independent of the properties of the sample and cantilever characteristics and shows the strong dependence of the transitions on the tip radius. The main advantage of this method is rapid in situ characterization. Rapid in situ characterization enables one to continuously monitor the tip size during experiments. Further, we show how to reproducibly shape the tip from a given initial size to any chosen larger size. This approach combined with the in situ tip size monitoring enables quantitative comparison of materials measurements between samples. These methods are set to allow quantitative data acquisition and make direct data comparison readily available in the community.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

NASA NTRS1997

Investigation of Creep Properties in RAINBOW High Displacement Actuators

Results from this study on fatigue in Rainbow and Cerambow actuators show that these high displacement actuators have definite fatigue rates and lifetimes depending upon (1) the amount of displacement generated, (2) how hard they are driven electrically, and (3) the microstructure (grain size) of the ceramic material. Lifetimes for some actuators were on the order of 10(exp 7) cycles at near dc (1 Hz) frequencies while others still retained up to 74% of their displacement at 2.1 x 10(exp 7) Hz.

Haertling, Gene↗

NASA NTRS1996

Superconductivity Devices: Commercial Use of Space

The work described in this report covers various aspects of the Rainbow solid-state actuator and sensor technologies. It is presented in five parts dealing with sensor applications, nonlinear properties, stress-optic and electrooptic properties, stacks and arrays, and publications. The Rainbow actuator technology is a relatively new materials development which had its inception in 1992. It involves a new processing technique for preparing pre-stressed, high lead containing piezoelectric and electrostrictive ceramic materials. Ceramics fabricated by this method produce bending-mode actuator devices which possess several times more displacement and load bearing capacity than present-day benders. Since they can also be used in sensor applications, Rainbows are part of the family of materials known as smart ceramics. During this period, PLZT Rainbow ceramics were characterized with respect to their piezoelectric properties for potential use in stress sensor applications. Studies of the nonlinear and stress-optic/electrooptic birefringent properties were also initiated during this period. Various means for increasing the utility of stress-enhanced Rainbow actuators are presently under investigation.

Haertling, Gene↗

NASA NTRS1995

Superconductivity devices: Commercial use of space

The work described in this report covers various aspects of the Rainbow solid-state actuator technology. It is presented in six parts dealing with materials, processing, fabrication, properties and associated phenomena. The Rainbow actuator technology is a relatively new materials development which had its inception in 1992. It consists of a new processing technology for preparing piezoelectric and electrostrictive ceramic materials. It involves a high temperature chemical reduction process which leads to an internal pre-stressing of the oxide wafer, thus the name Rainbow, an acronym for Reduced And INternally Biased Oxide Wafer. Ceramics fabricated by this method produce bending-mode actuator devices which possess several times more displacement and load bearing capacity than present-day benders (unimorphs, bimorphs). It is anticipated that these solid-state, electromechanical actuators which can be used in a number of applications in space such as cryopump motors, anti-vibration active structures, autoleveling platforms, telescope mirror correctors and autofocusing devices. When considering any of these applications, the key to the development of a successful device is the successful development of a ceramic material which can produce maximum displacement per volt input; hence, this initiative involving a solid-state means for achieving unusually high electromechanical displacement can be significant and far reaching. An additional benefit obtained from employing the piezoelectric effect in these actuator devices is the ability to also utilize them as sensors; and, indeed, they can be used as both motor (actuator) and generator (sensor) in multifunction devices.

Haertling, Gene↗