Engineering Papers⌕ Search

Engineering topics

Li, Fanxing

Publications and source records attributed to Li, Fanxing.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Core-Shell Oxidative Aromatization Catalysts for Single Step Liquefaction of Distributed Shale Gas (Final Technical Report)

The objective of this project was to design and demonstrate a core-shell structured multifunctional catalyst to convert the light (dry) components of shale gas into liquid aromatic compounds (primarily benzene and toluene) in a single step. Operated in a modular oxidative aromatization system (OAS) under a cyclic redox scheme, the novel catalyst and process can significantly improve the value and transportability of distributed shale gas. Since the project started, each quarter addressed a different set of tasks related to the completion of the milestone detailed in the project award. The yearly summaries of these tasks are summarized below: Q1-Q4: • Conducted project planning and literature search. • Investigated a number of SHC redox catalysts using thermogravimetric analysis and fixed-bed reactor experiments. • Initiated process modeling towards generating two process models for the methane DHA base case and OAS process. • Developed DHA catalysts capable of producing >500 g/kg-cat-hr aromatics at 80% or greater aromatics selectivity at 700°C. Q5-Q8: • Developed alternative approaches with sequential bed configurations to enhance the aromatic yields based on OCM+DHA • Improved the zeolite synthesis efficiency by using the microwave-assisted technique and investigated the synthesis conditions on the zeolite yield, crystalline structure and morphology • Constructed a set of Aspen Plus process models with significant energy savings for OAS as compared to the base case non-oxidative DHA. • Adapted conventional hydrothermal method to be applicable to the microwave synthesizer unit for more efficient catalyst synthesis. • Studied the structure of the OCM catalyst and the dispersion of the carbonate in the redox reactions and in methane flow with Raman Spectroscopy. Q9-Q12: • Scaled up the catalyst synthesis with the microwave synthesis method. Based on its performance, procedural characterizations and catalytic performance testing were further conducted for the new microwave synthesized catalysts with the newly-developed product analysis procedure. • Developed the reaction system setup for the C2-DHA or OCM+DHA reaction product and achieved a better product collection-analysis method for the aromatic products with an improved carbon balance. The product from the OCM reaction exhibited complicated effects on the DHA catalyst. • Conducted additional OCM catalyst characterization using Near Ambient Pressure X-ray Photoelectron Spectroscopy and in situ Raman characterization • Validated the significant energy savings for OAS as compared to the base case non-oxidative DHA. Successfully set up the simulation model for the OCM+DHA+SHC reaction system based on the updated experimental results from NCSU. Q13-End of project: • Synthesized new zeolite catalysts by the microwave method, conducted characterizations (XRD, SEM, and TEM) and catalytic behavior testing. • Explored the “wet” C 2 H 6 and C 2 H 4 DHA reactions with using steam co-feed. A subsequent reduction as the regeneration step can regenerate the DHA catalyst and recover 99% activity of the fresh performance. • Achieved a 15.3% single-pass aromatic yield from methane by rationally combining the OCM and DHA at different temperatures. • Conducted a 105-hour stability test with an improved regeneration procedure, with an average aromatic yield of 13.8%. • Developed new catalyst and achieved a record-high 23.2% yield.

03 NATURAL GAS↗
DOE OSTI2024

Kinetic assessment of pulp mill-derived lime mud calcination in high CO 2 atmosphere

The chemical pulping of biomass involves the recycling of calcium through the calcination of lime mud, which is mostly comprised of calcium carbonate (CaCO 3 ). Lime mud decomposes under elevated temperatures to generate calcium oxide (CaO) and carbon dioxide (CO 2 ), the kinetics of which are strongly influenced by the CO 2 partial pressure and temperature. Oxy-fuel combustion and electrified lime kilns for lime mud calcination are intriguing methods to decarbonize this highly polluting operation within the biomass pulping industry. However, the high CO 2 concentration in oxy-fuel and electrified calcination processes alters the kinetics and overall reactivity of lime mud. For the first time, a model-fitting method is used to determine the kinetic parameters for lime mud calcination under a wide range of temperatures (550 °C–1250 °C) and under different concentrations of CO2 (0 %, 15 %, 50 %, and 90 %). A kinetic model is developed that accurately predicts the reaction rates as a function of temperature and CO 2 concentration. The apparent activation of energy for lime mud calcination is elevated under a high CO 2 environment. Relative to inert gas (N 2 , Ar), the temperature window for calcination is much smaller under high CO 2 environments. The presence of Na in lime mud does not seem to affect calcination under a high CO 2 environment. Finally, particle size variation does not have a significant effect on calcination under a high CO 2 environment.

09 BIOMASS FUELS↗
DOE OSTI2024

Technoeconomic and Emissions Analysis of the Hybrid Redox Process for the Production of Acetic Acid with CO 2 Utilization

The production of oxygenated hydrocarbons, such as acetic acid, using captured CO 2 is a promising pathway to reduce greenhouse gas emissions in the chemical industry. The use of a chemical looping‐based hybrid redox process (HRP) is proposed to convert CO 2 and natural gas into separate CO and syngas streams that can be used to produce various commodity oxygenates, while allowing the beneficial utilization of captured CO 2 . Here, a detailed technoeconomic analysis of HRP applied to the production of acetic acid is presented. Emissions and energy analyses show the ability of HRP to lower the CO 2 emissions for acetic acid synthesis by 74% compared to a conventional steam and autothermal reforming route. HRP also offers a potential 34% reduction in capital costs. Compared to a dry reforming based acetic acid production route, HRP has the potential for significantly lower costs. If integrated with a low carbon energy source, HRP has the potential to achieve a negative emission of greenhouse gas (‐0.50 kg CO 2 per kg acetic acid).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Metal-facilitated, sustainable nitroarene hydrogenation under ambient conditions

Hydrogenation is a critical reaction in the chemical industry, yielding a range of important compounds such as fine chemicals, pharmachemicals and agrochemicals. However, conventional hydrogenation typically requires pressurized hydrogen, high temperatures and involves noble metal catalysts. Here, we proposed a two-step hydrogenation process, utilizing water as the hydrogen source for the industrially important reduction of nitroarenes to anilines. A metal or reduced metal oxide, which can be obtained from solar thermal or electrochemical reduction, acts as the active site for nitrobenzene adsorption, H 2 O dissociation and in-situ hydrogen generation. Among the 15 metal and reduced metal oxides investigated, Zn and Sn emerged as highly efficient catalysts for the reduction of a broad range of organic nitro compounds under mild conditions, with H 2 utilization efficiency 1-2 orders of magnitude above the state-of-the-art. The presented protocol provides extra dimensions for designing and optimizing conventional hydrogenation process with an alternative pathway. The reactive hydrogen atoms generated in-situ effectively overcome the barriers associated with hydrogen gas dissolution and its subsequent dissociation on the catalyst surface, thereby greatly enhancing the overall effectiveness for the hydrogenation reaction. This research potentially establishes a sustainable, generally applicable alternative to conventional hydrogenation methods, simultaneously presenting a viable solution for renewable energy storage.

25 ENERGY STORAGE↗
DOE OSTI2023

Mixed oxides as multi-functional reaction media for chemical looping catalysis

Over the past two decades, chemical looping combustion (CLC) has been extensively investigated as a promising means to produce electric power while generating a concentrated carbon dioxide stream for sequestration. We note that the chemical looping strategy can be extended well outside of combustion-based carbon capture. In fact, application of the chemical looping strategy in areas beyond combustion can result in somewhat unexpected energy and carbon dioxide savings without producing a concentrated CO 2 stream at all. Furthermore, it allows the looping-based technologies to tap into applications such as chemical production – a $\$$4 trillion per year industrial sector with high energy and carbon intensities. Here, the key resides in the design of effective oxygen carriers, also known as redox catalysts in the context of selective chemical conversion through chemical looping catalysis (CLCa). This contribution focuses on the design and applications of mixed oxides as multi-function reaction media in CLCa. Since typical mixed oxide oxygen carriers tend to be nonselective for hydrocarbon conversion, the first part of this article presents generalized design principles for surface modification of mixed oxides to improve their selectivity and catalytic activity. Applications of these redox catalysts in chemical looping – oxidative dehydrogenation (CL-ODH) of a variety of light alkanes and alkyl-benzenes are presented. This is followed with a discussion of computation assisted mixed oxide design based upon thermodynamic criteria. Finally, a few new directions for the chemical looping technologies are introduced.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Oxygen carrying materials with surface modification for redox-based catalysis and methods of making and uses thereof

Redox catalysts having surface medication, methods of making redox catalysts with surface modification, and uses of the surface modified redox catalysts are provided. In some aspects, the redox catalysts include a core oxygen carrier region such as CaMnO 3 , BaMnO 3−δ , SrMnO 3−δ , Mn 2 SiO 4 , Mn 2 MgO 4−δ , La 0.8 Sr 0.2 O 3−δ , La 0.8 Sr 0.2 FeO 3−δ , Ca 9 Ti 0.1 Mn 0.9 O 3−δ , Pr 6 O 11−δ , manganese ore, or a combination thereof; and an outer shell having an average thickness of about 1-100 monolayers surrounding the outer surface of the core region. The outer shell can include, for example a salt selected such as Li 2 WO 4 , Na 2 WO 4 , K 2 WO 4 , SrWO 4 , Li 2 MoO 4 , Na 2 MoO 4 , K 2 MoO 4 , CsMoO 4 , Li 2 CO 3 , Na 2 CO 3 , K 2 CO 3 , or a combination thereof.

Li, Fanxing↗
DOE OSTI2023

A Novel Molten Salt System for CO 2 Based Oxidative Dehydrogenation with Integrated Carbon Capture (Final Technical Report)

The objective of this project was to develop a comprehensive proof-of-concept for sustainable and cost-effective production of propionic acid and value-added olefins from carbon dioxide (CO 2 ) in power plant flue gas and domestic shale gas resources. This was realized via a molten-salt-mediated oxidative dehydrogenation (MM-ODH) process that performs CO 2 capture (from power plant flue gas) and CO 2- assisted alkane oxidative dehydrogenation in a two-step, thermochemical scheme. The resulting carbon monoxide (CO) and light olefin (e.g., ethylene from ethane ODH) can be subsequently converted into propionic acid via the industrially proven hydrocarboxylation process.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2023

Plasma-Assisted Catalytic Conversion of CO 2 and Propane to Propylene and CO

Ethylene and propylene are critical pillars of the petrochemical and plastics industry. The current industrial route for producing these olefins, which is via steam cracking process, is extremely endothermic and highly CO 2 -intensive. In this work, Susteon, in partnership with the North Carolina State University (NCSU), New Castle University (NU), and SoCalGas, has investigate catalytic materials and process designs to produce propylene from propane by utilizing CO 2 as a soft oxidant in the presence of low temperature dielectric barrier discharge plasma. This route integrates the effect of catalysis and the presence of a plasma environment to intensify the production of the important three carbon olefin from propane at a lower temperature and near atmospheric pressure. This CO 2 oxidative dehydrogenation (CO 2 -ODH) process coproduces CO, which is a valuable by-product, critical for the petrochemical sector. Through this work, Susteon and the team have made significant progress in developing catalysts and gaining insights on the plasma-assisted CO 2 -ODH process.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2023

Kinetic study of Ni-M/CNT catalyst in methane decomposition under microwave irradiation

Methane catalytic decomposition has been studied with catalysts that can attenuate the energy of electromagnetic waves to heat and drive the reaction. Herein, we report, for the first time, a comprehensive kinetic study of Ni-M (M=Pd, Cu, or Fe)-CNT catalysts under microwave irradiation. These binary metal alloy nanoparticles have been synthesized on multiwalled carbon nanotube support with solvothermal process. These catalysts showed incredible performance for both absorbing microwave energy and catalyzing the reaction to form carbon nanotubes and hydrogen. Ni-M-CNT has a reaction order of 0.74. 10Ni-1 Pd-CNT, 10Ni-1Cu-CNT, and 10Ni-1Fe-CNT have activation energies at 87, 75, and 69 kJ/mol. The investigation was carried out in a differential reactor. The results indicated that 10Ni-1Fe-CNT had the lowest activation energy due to the increase in microwave susceptibility. Here, this work pioneered the microwave catalytic methane decomposition field as well as paving the way for future electrification of CO x -free hydrogen production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Carbon-Assisted, Continuous Syngas Production in a Chemical Looping Scheme

In the current energy and environment scenario, it is imperative to develop energy efficient routes for chemical manufacturing that also pave the way for mitigation of greenhouse gas emissions. This work presents an efficient pathway for continuous syngas production via a chemical looping conversion of the two most potent greenhouse gases—CH 4 , and CO 2 . The well-known dry-reforming process of converting CH 4 , and CO 2 to syngas is energy-intensive and suffers from catalyst deactivation. The chemical looping approach, on the other hand, provides avenues for mitigating catalyst deactivation and enabling improved energy efficiency. The key to such process enhancements lies in the intricate structure–function relationships of the catalyst and its correlation to the process variables. We present the reduction and oxidation characteristics of 5 wt.% Ni/Ce 1-x Zr x O 2 -based catalysts (x = 0, 0.4, and 0.625). We demonstrate low temperature CH4 activation over Ni-promoted samples as opposed to pure Ce 1-x Zr x O 2 . Moreover, our results depict an optimum regeneration of these catalysts when oxidized by CO 2 , and H 2 O, which allows for chemical looping operation of steam reforming of methane as well. Process variables were tuned to optimize the CH 4 conversion (over 80%), and H 2 /CO ratio at 650 °C. The critical surface reactions—carbon accumulation and gasification, and thermocatalytic CO 2 splitting were investigated to elucidate the dynamic nature of the catalyst surface. In conclusion, the impact of this work lies in showcasing the opportunities to design chemical looping reactors for energy efficient syngas production from waste greenhouse gases.

25 ENERGY STORAGE↗
DOE OSTI2023

Numerical modeling of chemical looping oxidative dehydrogenation of ethane in parallel packed beds

Chemical looping oxidative dehydrogenation (CL-ODH) of ethane has the potential to be a highly efficient alternative to steam cracking for ethylene production. Accurate reactor modeling is of critical importance to efficiently scale up and optimize this new technology. This study reports a one-dimensional, heterogeneous packed bed model to simulate the CL-ODH of ethane to ethylene with a Na 2 MoO 4 -promoted CaTi 0.1 Mn 0.9 O 3 redox catalyst. Here, the overall reaction kinetics was well-described by coupling the gas-phase steam cracking of ethane with the reduction kinetics of the redox catalyst by H 2 and C 2 H 4 . The impact of H 2 on the formation rate of CO 2 byproduct from C 2 H 4 conversion was also thoroughly investigated to validate the applicability of the kinetic model under operational environments. The temperature variation within the different CL-ODH steps and the temperature distribution along the bed were also carefully considered. The accuracy of the model was validated by experiments conducted in a large lab-scale packed bed reactor (200 g catalyst loading), with an average deviation of 2.8% in terms of ethane conversion and ethylene yield. The model was subsequently used to optimize the operating parameters of the CL-ODH reactor, indicating that up to 63.7% single-pass C 2 +olefin yield can be achieved with the current redox catalyst bed whereas further optimization of the redox catalyst to inhibit C 2 H 4 activation can result in 69.4% single-pass C 2 +yield while maintaining low CO 2 selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Chemical looping conversion of CH4/CO2 to syngas on 5wt.%Ni@Ce0.6Zr0.4O2 catalyst: Impact of dynamic accumulation of surface carbon and oxygen vacancies

Syngas, a combination of carbon monoxide (CO) and hydrogen (H2), is a precursor to many chemicals and fuels, contributing to the billion-dollar global hydrocarbon industry. Chemical looping reforming (CLR) of the greenhouse gases methane (CH4) and carbon dioxide (CO2) allows for energy-efficient production of syngas. 5wt.% nickel (Ni) on ceria-zirconia (5wt%Ni@Ce0.6Zr0.4O2) mixed metal oxide catalyst was investigated here to explore pathways for enhanced syngas production on sustainable earth-abundant transition metal supported catalysts. The role of reduction-oxidation (redox) state of the catalyst, and carbon formation on the catalyst surface during chemical looping is explored to drive superior reaction kinetics, conversions, selectivity, and syngas ratios (H2/CO). The bulk and surface structure of the catalyst, along with carbon deposition features were characterized by electron microscopy, X-Ray diffraction, and ex situ Raman spectroscopy. The dynamic evolution of catalysts under CLR reaction conditions and the intrinsic reaction mechanisms were probed with in situ Raman spectroscopy, in situ Fourier transform spectroscopy, dynamic oxygen storage capacity (DOSC), and the Temporal Analysis of Products (TAP) reactor studies. Intrinsic kinetics of syngas production via CLR was correlated to the redox state of catalyst and the participation of nickel-catalyzed multiwalled carbon nanotube (CNT) growth, allowing enhanced CLR reaction performance.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Ce x Zr 1– x O 2 -Supported CrO x Catalysts for CO 2 -Assisted Oxidative Dehydrogenation of Propane–Probing the Active Sites and Strategies for Enhanced Stability

CO 2 -assisted oxidative dehydrogenation of propane (CO 2 -ODH) represents an attractive approach for propylene production and CO 2 utilization. As a soft oxidant, CO 2 can minimize overoxidation of the hydrocarbons to enhance the propylene selectivity while increasing the equilibrium yield. However, a major challenge of CO 2 -ODH is the rapid deactivation of the catalysts. The current study focuses on designing Ce x Zr 1–x O 2 -mixed oxide-supported CrO x catalysts for CO 2 -ODH with enhanced product selectivity and catalyst stability. By doping 0–30% Ce in the Ce x Zr 1–x O 2 mixed oxide support, propane conversion of 53–79% was achieved at 600 °C, with propylene selectivity up to 82%. Compared to the pure ZrO 2 -supported catalyst (i.e., 5 wt %Cr/ZrO 2 ), 20–30 %Ce doped catalysts (i.e., 5 wt %Cr/Ce 0.2 Zr 0.8 O 2 and 5 wt %Cr/Ce 0.3 Zr 0.7 O 2 ) inhibited the formation of CH 4 and ethylene and improved propylene selectivity from 57 to 77–82%. Detailed characterizations of the 5%Cr/Ce 0.2 Zr 0.8 O 2 catalyst and density functional theory (DFT) calculations indicated that Cr 3+ is the active species during the CO 2 -ODH reaction, and the reaction follows a non-redox dehydrogenation pathway. Coke formation was determined to be the primary reason for catalyst deactivation, and the addition of Ce to the ZrO 2 support greatly enhanced the coke resistance, leading to superior stability. Furthermore, coke removal by oxidizing the catalyst in air is effective in restoring its activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ru-promoted perovskites as effective redox catalysts for CO2 splitting and methane partial oxidation in a cyclic redox scheme

The current study reports AxA’1-xByB’1-yO3- perovskite redox catalysts (RCs) for CO2-splitting and methane partial oxidation (POx) in a cyclic redox scheme. Strontium (Sr) and iron (Fe) were chosen as A and B site elements with A’ being lanthanum (La), samarium (Sm) or yttrium (Y), and B’ being manganese (Mn), or titanium (Ti) to tailor their equilibrium oxygen partial pressures (P_(O_2 ) s) for CO2-splitting and methane partial oxidation. DFT calculations were performed for predictive optimization of the oxide materials whereas experimental investigation confirmed the DFT predicted redox performance. The redox kinetics of the RCs improved significantly by 1 wt.% ruthenium (Ru) impregnation without affecting their redox thermodynamics. Ru impregnated LaFe0.375Mn0.625O3 (A=0, A’=La, B=Mn, and B’=0) was the most promising RC in terms of its superior redox performance (CH4/CO2 conversion >90% and CO selectivity~ 95%) at 800oC. Long-term redox testing over Ru impregnated LaFe0.375Mn0.625O3 indicated stable performance during the first 30 cycles following with a ~25% decrease in the activity during the last 70 cycles. Air treatment was effective to reactivate the redox catalyst. Detailed characterizations revealed the underlying mechanism for redox catalyst deactivation and reactivation. Furthermore, this study not only validated a DFT guided mixed oxide design strategy for CO2 utilization but also provides potentially effective approaches to enhance redox kinetics as well as long-term redox catalyst performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Sustainable Conversion of Carbon Dioxide and Shale Gas to Green Acetic Acid via a Thermochemical Cyclic Redox Scheme (Final Report)

The large-scale production of commodity chemicals relies heavily on the combustion of fossil fuels. As a result, enormous amounts of carbon dioxide (CO 2 ) are emitted which severely affects the global climate. The challenges for CO 2 utilization reside in the high stability of CO 2 molecules relative to the products, which requires the addition of significant external energy and overcoming slow and/or unfavorable reaction kinetics/thermodynamics. Chemical looping dry reforming of methane (CLDRM), also known as a hybrid redox process (HRP), is a promising alternative that allows the utilization of CO 2 and domestic shale gas resources to produce commodity chemicals. HRP works in two steps: In the first step, a redox catalyst reacts with methane to yield synthesis gas with a H 2 /CO ratio near 2:1, which is suitable for methanol and Fischer–Tropsch synthesis. The reduced redox catalyst then reacts with an oxidizing agent, such as CO 2 , to yield CO. In comparison to conventional thermochemical CO 2 splitting approaches, the use of methane as the reducing agent in HRP can significantly lower the operating temperature for CO 2 splitting.

03 NATURAL GAS↗