Engineering Papers⌕ Search

Engineering topics

Li Wang

Publications and source records attributed to Li Wang.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Wall-Modeled Large-Eddy Simulations for High-Lift Configurations using FUN3D

Wall-modeled large-eddy simulation (WMLES) capability has recently been implemented into FUN3D, an unstructured, node-centered, finite-volume solver developed at the NASA Langley Research Center. In this paper, WMLES is assessed for two configurations that are representative for high-lift applications. The first configuration is a nominal two-dimensional multielement airfoil that has been extensively studied in the literature. WMLES solutions are computed for four angles of attack and compared with previously reported solutions. Good agreement of integrated forces, surface pressures, and boundary-layer velocity profiles is shown with available experimental data especially at lower angles of attack. WMLES solutions are also computed for the NASA High-Lift Common Research Model over a large range of angles of attack. Forces, pitching moments, and pressure distributions are favorably compared with the experimental data up to the maximum lift, including the angle of attack where the maximum lift is obtained experimentally. Eddy visualization techniques of q-criterion and density-gradient magnitude illustrate the resolved content.

High-Lift flows↗
NASA NTRSDate not supplied

Edge-Based Viscous Method for Mixed-Element Node-Centered Finite-Volume Solvers

A novel, efficient, edge-based viscous (EBV) discretization method has been recently developed, implemented in a practical, unstructured-grid, node-centered, finite-volume flow solver, and applied to viscous-kernel computations that include evaluations of meanflow viscous fluxes, turbulence-model and chemistry-model diffusion terms, and the corresponding Jacobian contributions. Initially, the EBV method had been implemented for tetrahedral grids and demonstrated multifold acceleration of all viscous-kernel computations. This paper presents an extension of the EBV method for mixed-element grids. In addition to the primal edges of a given mixed-element grid, virtual edges are introduced to connect cell nodes that are not connected by a primal edge. The EBV method uses an efficient loop over all (primal and virtual) edges and features a compact discretization stencil based on the nearest neighbors. This study verifies the EBV method and assesses its efficiency on mixed-element grids by comparing the EBV solution accuracy and iterative convergence with those of well-established solutions obtained using a cell-based viscous (CBV) discretization method. The EBV solver’s memory footprint is optimized and often smaller than the memory footprint of the CBV solver. A multifold speedup is demonstrated for all viscous-kernel computations resulting in significant reduction of the time to solutions for several benchmark mixed-element-grid computations, including simulations of a flow around NASA’s juncture-flow model and a hypersonic, chemically reacting flow around a blunt body.

CFD↗
NASA NTRSDate not supplied

High-Fidelity Analysis of Six-Passenger Quadrotor Air Taxi Concept

A code-to-code comparison has been performed for high-fidelity simulations ofNASA’s six-passenger quadrotor air taxi con- cept vehicle. Themultidisciplinary simulations combine comprehensive rotorcraft dynamics with high-fidelity fluid dynamics obtained from an unsteady Navier-Stokes computational fluid dynamics code. The results are then compared with those in the literature. A quantitative comparison of converged trim angles has been performed and normal force, chord force, and pitching-moment coefficients arepresented for qualitativecomparison.

eVTOL↗
NASA NTRSDate not supplied

Edge-Based Viscous Method for Mixed-Element Node-Centered Finite-Volume Solvers

A novel, efficient, edge-based viscous (EBV) discretization method has been recently developed, implemented in a practical, unstructured-grid, node-centered, finite-volume flow solver, and applied to viscous-kernel computations that include evaluations of meanflow viscous fluxes, turbulence-model and chemistry-model diffusion terms, and the corresponding Jacobian contributions. Initially, the EBV method had been implemented for tetrahedral grids and demonstrated multifold acceleration of all viscous-kernel computations. This paper presents an extension of the EBV method for mixed-element grids. In addition to the primal edges of a given mixed-element grid, virtual edges are introduced to connect cell nodes that are not connected by a primal edge. The EBV method uses an efficient loop over all (primal and virtual) edges and features a compact discretization stencil based on the nearest neighbors. This study verifies the EBV method and assesses its efficiency on mixed-element grids by comparing the EBV solution accuracy and iterative convergence with those of well-established solutions obtained using a cell-based viscous (CBV) discretization method. The EBV solver’s memory footprint is optimized and often smaller than the memory footprint of the CBV solver. A multifold speedup is demonstrated for all viscous-kernel computations resulting in significant reduction of the time to solutions for several benchmark mixed-element-grid computations, including simulations of a flow around NASA’s juncture-flow model and a hypersonic, chemically reacting flow around a blunt body.

Edge-based viscous method↗
NASA NTRSDate not supplied

Assessment of Edge-Based Viscous Method for Corner-Flow Solutions on Graphics Processing Units

A highly efficient, edge-based viscous (EBV) discretization method has been recently implemented in a practical, unstructured-grid, node-centered, finite-volume flow solver and evaluated for Reynolds-averaged Navier-Stokes (RANS) formulations. In comparison to a well-established cell-based viscous (CBV) method, the EBV method has demonstrated multifold acceleration of all viscous-kernel computations on general unstructured mixed-element grids. The viscous kernels include evaluation of viscous fluxes, diffusion terms in turbulence models, and the corresponding Jacobian terms. In this paper, an EBV implementation of a nonlinear extension of the Spalart-Allmaras turbulence model, SA-neg-QCR2000, is presented and verified. The SA-neg-QCR2000 model is used for simulating turbulent corner flows. Previously reported EBV computations have been conducted on traditional computing architectures based on central processing units (CPU). This paper assesses benefits of the EBV method on modern high-performance computing architectures based on graphics processing units (GPU). The GPU implementations of the CBV and EBV methods are verified by comparing solutions and iterative convergence with those observed in CPU computations on the same grids. A comprehensive assessment of the EBV speedup on CPU and GPU architectures is presented for established benchmark corner flows, namely, a supersonic flow through a long square duct and a subsonic flow around a NASA juncture flow model.

CFD↗
NASA NTRSDate not supplied

A Multi-Architecture Approach for Implicit Computational Fluid Dynamics on Unstructured Grids

High-performance computing (HPC) architectures are trending toward manycore paradigms such as graphics processing units (GPUs). Approximately half of the top 100 publicly disclosed supercomputers in the world utilize GPU accelerators for performance. This is in contrast to a decade ago, where there were only a few such machines in the top 100. It is not currently possible to compile and run legacy central processing unit (CPU) software efficiently on GPUs without significant refactoring. Though a number of frameworks offering performance portability exist, none offer a standardized specification that is supported by all major hardware vendors. Additionally, experiences show that obtaining a high percentage of peak performance often requires architecture-specific code. This work details a pragmatic multi-architecture computational fluid dynamics library focused on aerospace problems across the speed range from low subsonic to hypersonic flows involving thermochemical nonequilibrium. A thin abstraction layer above NVIDIA CUDA C++ is utilized, which enables primarily single-source software currently capable of running efficiently on multicore CPUs, NVIDIA GPUs, AMD GPUs, and Intel GPUs. Results on various problems of interest across the speed range are presented and performance is compared between various architectures.

GPU↗
NASA NTRSDate not supplied

Assessment of Edge-Based Viscous Method for Corner-Flow Solutions on Graphics Processing Units

A highly efficient, edge-based viscous (EBV) discretization method has been recently implemented in a practical, unstructured-grid, node-centered, finite-volume flow solver and evaluated for Reynolds-averaged Navier-Stokes (RANS) formulations. In comparison to a well-established cell-based viscous (CBV) method, the EBV method has demonstrated multifold acceleration of all viscous-kernel computations on general unstructured mixed-element grids. The viscous kernels include evaluation of viscous fluxes, diffusion terms in turbulence models, and the corresponding Jacobian terms. In this paper, an EBV implementation of a nonlinear extension of the Spalart-Allmaras turbulence model, SA-neg-QCR2000, is presented and verified. The SA-neg-QCR2000 model is used for simulating turbulent corner flows. Previously reported EBV computations have been conducted on traditional computing architectures based on central processing units (CPU). This paper assesses benefits of the EBV method on modern high-performance computing architectures based on graphics processing units (GPU). The GPU implementations of the CBV and EBV methods are verified by comparing solutions and iterative convergence with those observed in CPU computations on the same grids. A comprehensive assessment of the EBV speedup on CPU and GPU architectures is presented for established benchmark corner flows, namely, a supersonic flow through a long square duct and a subsonic flow around a NASA juncture flow model.

CFD↗
NASA NTRSDate not supplied

A Multi-Architecture Approach for Implicit Computational Fluid Dynamics on Unstructured Grids

High-performance computing (HPC) architectures are trending toward manycore paradigms such as graphics processing units (GPUs). Approximately half of the top 100 publicly disclosed supercomputers in the world utilize GPU accelerators for performance. This is in contrast to a decade ago, where there were only a few such machines in the top 100. It is not currently possible to compile and run legacy central processing unit (CPU) software efficiently on GPUs without significant refactoring. Though a number of frameworks offering performance portability exist, none offer a standardized specification that is supported by all major hardware vendors. Additionally, experiences show that obtaining a high percentage of peak performance often requires architecture-specific code. This work details a pragmatic multi-architecture computational fluid dynamics library focused on aerospace problems across the speed range from low subsonic to hypersonic flows involving thermochemical nonequilibrium. A thin abstraction layer above NVIDIA CUDA C++ is utilized, which enables primarily single-source software currently capable of running efficiently on multicore CPUs, NVIDIA GPUs, AMD GPUs, and Intel GPUs. Results on various problems of interest across the speed range are presented and performance is compared between various architectures.

GPU↗
NASA NTRSDate not supplied

Wall-Modeled Large Eddy Simulation Method for Unstructured-Grid Navier-Stokes Solvers

This paper reports on the implementation and assessment of a Wall-Modeled Large-Eddy Simulation (WMLES) methodology in an unstructured-grid, node-centered flow solver, FUN3D that is developed and supported at the NASA Langley Research Center. Finite-volume (FV) and finite-element (FE) discretization schemes considered in the study provide formal second-order spatial accuracy. Large-Eddy Simulations (LES) resolve large-scale turbulent-flow features and filter out small-scale effects using the Vreman subgrid-scale model. At solid-wall boundaries, a shear-stress model is employed to provide a proper boundary-flux closure. The nonlinear equations are integrated in time using either an optimized backward difference formula or an implicit multistage Runge-Kutta temporal scheme. The implicit equations at each time step are solved by strong nonlinear iteration schemes. WMLES demonstrations are shown for two high-lift configurations, namely, the McDonnell Douglas 30P30N multielement airfoil and a NASA High-Lift Common Research Model. Results show that the WMLES approaches implemented in the FV and FE discretization methods produce consistent solutions and are capable of capturing key aerodynamic characteristics and flow structures for high-lift configurations at a wide range of angles of attack including maximum-lift conditions. In the 30P30N example, correct trends in the variations of integrated aerodynamic forces and moments, surface pressure distributions, and boundary-layer profiles are captured as the Reynolds number is increased.

CFD; turbulence modeling; High-Lift flow simulatio↗