Engineering topics

Lew, Jiann-Shiun

Publications and source records attributed to Lew, Jiann-Shiun.

9 records

NASA NTRS2001

Structural Damage Detection Using Virtual Passive Controllers

This paper presents novel approaches for structural damage detection which uses the virtual passive controllers attached to structures, where passive controllers are energy dissipative devices and thus guarantee the closed-loop stability. The use of the identified parameters of various closed-loop systems can solve the problem that reliable identified parameters, such as natural frequencies of the open-loop system may not provide enough information for damage detection. Only a small number of sensors are required for the proposed approaches. The identified natural frequencies, which are generally much less sensitive to noise and more reliable than the identified natural frequencies, are used for damage detection. Two damage detection techniques are presented. One technique is based on the structures with direct output feedback controllers while the other technique uses the second-order dynamic feedback controllers. A least-squares technique, which is based on the sensitivity of natural frequencies to damage variables, is used for accurately identifying the damage variables.

Lew, Jiann-Shiun↗

NASA NTRS1998

Modal Parameter Identification of a Flexible Arm System

In this paper an experiment is designed for the modal parameter identification of a flexible arm system. This experiment uses a function generator to provide input signal and an oscilloscope to save input and output response data. For each vibrational mode, many sets of sine-wave inputs with frequencies close to the natural frequency of the arm system are used to excite the vibration of this mode. Then a least-squares technique is used to analyze the experimental input/output data to obtain the identified parameters for this mode. The identified results are compared with the analytical model obtained by applying finite element analysis.

Barrington, Jason↗

NASA NTRS1998

Effect of Uncertainty of Identified Parameters on Structural Damage Detection

This paper presents a study of the effect of the uncertainty of identified parameters on the damage detection of structure. The identified parameters, which are obtained by applying system identification algorithms to analyze the time-domain response data, have uncertainty due to noise, environmental change, etc. The damage of some structural elements may have less effect on the identified parameters than noise or environmental change, so some damage situations cannot be distinguished under these circumstances. An algorithm is presented to determine whether the considered damage can be distinguished. A twenty-bay truss structure is used to demonstrate and verify the study.

Davidson, Mario↗

NASA NTRS1993

Quantification of model error via an interval model with nonparametric error bound

The quantification of model uncertainty is becoming increasingly important as robust control is an important tool for control system design and analysis. This paper presents an algorithm that effectively characterizes the model uncertainty in terms of parametric and nonparametric uncertainties. The algorithm utilizes the frequency domain model error which is estimated from the spectra of output error and input data. The parametric uncertainty is represented as an interval transfer function while the nonparametric uncertainty is bounded by a designed error bound transfer function. Both discrete and continuous systems are discussed in this paper. The algorithm is applied to the Mini-Mast example, and the detail analysis is given.

Lew, Jiann-Shiun↗

NASA NTRS1992

Comparison of candidate methods to distinguish noise modes from system modes in structural identification

In modal identification, nonphysical noise or computation modes always appear to help match the input-output data. This paper studies the ability of four criteria to distinguish which modes in a model are noise modes: (1) modal amplitude coherency, (2) the relative contribution of each mode to the pulse response indicated by the mode singular value, (3) the variances of the mode frequencies and damping factors produced by a chosen measurement noise level, and (4) identification of the backward-time in order to let the shift from positive to negative damping of the true system modes distinguish these modes from noise modes. Both simulated and experimental data are used to study the four criteria.

Longman, Richard W.↗

NASA NTRS1991

Multiple shooting algorithms for jump-discontinuous problems in optimal control and estimation

Multiple shooting algorithms are developed for jump-discontinuous two-point boundary value problems arising in optimal control and optimal estimation. Examples illustrating the origin of such problems are given to motivate the development of the solution algorithms. The algorithms convert the necessary conditions, consisting of differential equations and transversality conditions, into algebraic equations. The solution of the algebraic equations provides exact solutions for linear problems. The existence and uniqueness of the solution are proved.

Mook, D. J.↗

NASA NTRS1991

Variance and bias computations for improved modal identification using ERA/DC

Variance and bias confidence criteria were recently developed for the eigensystem realization algorithm (ERA) identification technique. These criteria are extended for the modified version of ERA based on data correlation, ERA/DC, and also for the Q-Markov cover algorithm. The importance and usefulness of the variance and bias information are demonstrated in numerical studies. The criteria are shown to be very effective not only by indicating the accuracy of the identification results, especially in terms of confidence intervals, but also by helping the ERA user to obtain better results by seeing the effect of changing the sample time, adjusting the Hankel matrix dimension, choosing how many singular values to retain, deciding the model order, etc.

Longman, Richard W.↗

NASA NTRS1990

Intergration of system identification and robust controller designs for flexible structures in space

An approach is developed using experimental data to identify a reduced-order model and its model error for a robust controller design. There are three steps involved in the approach. First, an approximately balanced model is identified using the Eigensystem Realization Algorithm, which is an identification algorithm. Second, the model error is calculated and described in frequency domain in terms of the H(infinity) norm. Third, a pole placement technique in combination with a H(infinity) control method is applied to design a controller for the considered system. A set experimental data from an existing setup, namely the Mini-Mast system, is used to illustrate and verify the approach.

Juang, Jer-Nan↗

NASA NTRS1990

Integration of system identification and robust controller designs for flexible structures in space

A novel approach is developed using experimental data from the structural testing of a physical system to identify a reduced-order model and its error for a robust controller design. There are three steps involved in the approach. First, an approximately balanced model is identified using the eigensystem realization algorithm, which is an identification algorithm. Second, the model error is calculated and described in frequency domain in terms of the H(infinity) norm. Third, a pole-placement technique in combination with an H(infinity) control method is applied to design a controller for the system. A set of experimental data from an existing setup, namely the Mini-Mast system, is used to illustrate and verify the approach development in this paper.

Juang, Jer-Nan↗