Engineering topics
Publications and source records attributed to Leverton, J. W..
The effectiveness of the EPNL procedure in quantifying helicopter blade slap and tail rotor noise heard on approach some distance from the flyover position is addressed. Alternative methods of rating helicopter noise are reviewed including correction procedures to the EPNL concept which account for blade slap and tail rotor noise. The impact of the use of such corrections is examined.
The noise environment and how it affects crew communications in helicopters is considered. The signal to noise (S/N) ratio at the microphone and the effect of the attenuation provided by the helmet is discussed. This shows that the most important aspect is the S/N ratio at the microphone, particularly when helmets with improved attenuation characteristics are considered. Evidence is presented which shows that in high noise environments, the system S/N ratio is well below that required and hence there is an urgent need to reduce the cabin noise levels and improve the microphone rejection properties. Emphasis is placed on environmental/acoustic considerations.
The broadband noise generated by full-scale and model rotors is compared in terms of spectral content and the dependence on tip speed and rotor thrust/pitch angle. Low frequency broadband noise and high frequency broadband noise are studied separately and blade 'scaling' effects are outlined. The degree of agreement between measurements and theoretical and semi-empirical prediction methods is reviewed together with the directionality patterns. The parameters relating to the overall noise are also discussed. It is shown that in general good agreement is obtained between the full-scale and model rotors when considering spectral content and the dependency of the noise levels on tip speed and thrust. The scaling factors usually considered applicable to the low frequency broadband noise do not, however, appear to apply to either the model or full scale rotors.
Full scale and model rotor noise results are compared in terms of the spectral content, the directivity patterns, and the dependence on tip speed and rotor thrust/pitch angle. Each of the three main noise sources (rotational, low-frequency broadband, and high-frequency broadband) are reviewed separately, and account is taken of the measurement angle relative to the rotor disc. Blade 'scaling' effects are discussed together with the agreement between existing theoretical and semiempirical prediction methods. It is shown that in general good agreement is obtained between the full scale and model rotors for the spectral content and the velocity and thrust dependencies, while the 'scaling' factors associated with the low-frequency broadband noise do not seem to be appropriate.
Blade slap encountered in rotary wings and its effect on helicopter performance are reported. The results of various individual flight tests are presented and, where possible, correlated with one another. Observations from the subjective evaluation of blade slap are included, together with a modified form of the blade slap factor (BSF) which can be used as a design criteria.
Experimental study of helicopter rotor noise
Distributive loading rotational theory for helicopter rotor noise generation, considering steady and fluctuating force radiation and impulsive blade slap
Review of blade slap studies for determining noise in helicopters