Engineering topics

Lehmer, Jacob P.

Publications and source records attributed to Lehmer, Jacob P..

6 records

DOE OSTI2020

Development of an Advanced Integrated Operations Concept for Hybrid Control Rooms

The U.S. Nuclear Industry has an urgent need to reduce the operations and maintenance costs to remain economically competitive in today’s energy market. Measures to improve efficiency in operations will need to leverage technology in a way that safely transforms how plants are operated. This work describes the development of an integrated operations concept that integrates data from existing Instrumentation and Control (I&C) infrastructure, upgraded I&C systems, new sensors, and field technologies such as computer-based procedures to provide operators with centralized, streamlined instructions. The concept was developed to allow for an operator to remotely supervise many plant activities and to dramatically streamline plant operations and maintenance. This report describes the design philosophy, the analysis used to inform design, the implementation in the Human Systems Simulation Laboratory, and illustrates the design concept.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2019

Systematic Analyzer Of Numeric Data

This system is meant to take large amounts of digital, automatically gathered data, and then organize it into a form that shows data integrity and plot, graph.

Lehmer, Jacob P.↗

DOE OSTI2019

Modeling and Simulation - Introducing hardware-in-the-loop capabilities to the Human Systems Simulation Laboratory

The DOE Office of Nuclear Energy (DOE-NE) cybersecurity program would like to expand the use of the Human Systems Simulation Laboratory to include capabilities for cybersecurity research and development. Specifically, the introduction of hardware-in-the-loop (HITL) simulation of nuclear power plant architecture into the HSSL will enable researchers and nuclear utilities the ability to identify impacts generated by sophisticated hostile cyber adversaries to identify the consequences of simulated potential attack vectors, and to develop solutions for detecting or preventing these cyber attacks.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2019

Using Computational Fluid Dynamics of Wind Simulations Coupled With Weather Data to Calculate Dynamic Line Ratings

Dynamic line rating is a technology that allows for the rating of electrical conductors to be calculated based on local weather conditions rather than using ”worst-case” assumptions of weather conditions. The static ratings are typically based on weather conditions that are conservative in nature, and thus dynamic line rating may provide room to increase the current capacity. The local weather conditions may estimate conditions more accurately near the transmission lines accounting for terrain such as nearby hills. One way to estimate the local weather conditions is through the use of computational fluid dynamics. The results of a wind field simulation can be coupled with sparsely located weather stations to provide an accurate assessment of the wind speeds along the path of the conductor. Here, the wind field simulations are calculated using a steady state Reynolds-averaged Navier-Stokes model. These results along with local solar radiance measurements can be used to provide estimates of the steady state ampacity with the standard IEEE equations. An advanced test case for this process involves performing these simulations in a complex terrain, Hells Canyon, the deepest river gorge in North America. The results show that by using weather-based sensors without considering localized wind conditions, the available ampacity may be over-predicted significantly.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2019

Coupling computational fluid dynamics with the high resolution rapid refresh model for forecasting dynamic line ratings

This study looks at forecasted dynamic line ratings in southern Idaho by using data from the High Resolution Rapid Refresh (HRRR) model for forecasted weather conditions. The HRRR model can provide accurate 18- hour forecasts with a 15-minute temporal resolution. Typical static ratings used for over head transmission lines use overly conservative assumptions for local weather conditions, such as using the maximum solar irradiance or temperature measured during the summer combined with low wind speed for an entire season. The HRRR forecast model used here has a high spatial resolution to provide local forecast conditions along the entire length of a transmission line. The area that is of interest in this study is in southern Idaho spanning a total of 15,000 square kilometers. The forecasted weather data is coupled with a computational fluid dynamics model of the wind in the region to improve the resolution to an even finer scale for resolving local convective cooling rates on each individual transmission line midpoint span. This high fidelity approach can be used to find the minimum ampacity limit across all given midpoints of a transmission line to determine the absolute minimum to be used for the line rating. The ability to increase the line rating above the conservative static approach with the forecasted weather data provides a large potential to alleviate congestion and provide data for the utility market transactions. Furthermore, this study shows that for the region of interest, using forecasted weather data coupled with CFD modeling will calculate DLR ampacity rating above static about 90% of the time, with only a small relative error in the forecasted ampacity over time.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2016

Development of The PaR Tool: Modernization of the Planning and Routing Scripts

The placement of an efficient route for power lines is a poorly understood. Owners of the land are often divided about whether to allow their land to have a pole placed. A planning and routing toolkit allows for the people to allow and deny access to land then instantly see the route recalculate. The original planning and routing scripts were the original proof of concept, there was a series of problems that greatly hindered the functionality of the system. The PaR Tool a fully featured application replaced the proof of concept scripts and the speed of the system was increased by 254%. It is readily extensible and far easier to use.

17 WIND ENERGY↗