Engineering topics
Lee, Won-Kyu
Publications and source records attributed to Lee, Won-Kyu.
A buckling-sheet ring oscillator for electronics-free, multimodal locomotion
Locomotion of soft robots typically relies on control of multiple inflatable actuators by electronic computers and hard valves. Soft pneumatic oscillators can reduce the demand on controllers by generating complex movements required for locomotion from a single, constant input pressure, but either have been constrained to low rates of flow of air or have required complex fabrication processes. Here, we describe a pneumatic oscillator fabricated from flexible, but inextensible, sheets that provides high rates of airflow for practical locomotion by combining three instabilities: out-of-plane buckling of the sheets, kinking of tubing attached to the sheets, and a system-level instability resulting from connection of an odd number of pneumatic inverters made from these sheets in a loop. This device, which we call a “buckling-sheet ring oscillator” (BRO), directly generates movement from its own interaction with its surroundings and consists only of readily available materials assembled in a simple process—specifically, stacking acetate sheets, nylon film, and double-sided tape, and attaching an elastomeric tube. A device incorporating a BRO is capable of both translational and rotational motion over varied terrain (even without a tether) and can climb upward against gravity and downward against the buoyant force encountered under water.
Elastic-instability–enabled locomotion
Locomotion of an organism interacting with an environment is the consequence of a symmetry-breaking action in space-time. Here we show a minimal instantiation of this principle using a thin circular sheet, actuated symmetrically by a pneumatic source, using pressure to change shape nonlinearly via a spontaneous buckling instability. This leads to a polarized, bilaterally symmetric cone that can walk on land and swim in water. In either mode of locomotion, the emergence of shape asymmetry in the sheet leads to an asymmetric interaction with the environment that generates movement––via anisotropic friction on land, and via directed inertial forces in water. Scaling laws for the speed of the sheet of the actuator as a function of its size, shape, and the frequency of actuation are consistent with our observations. The presence of easily controllable reversible modes of buckling deformation further allows for a change in the direction of locomotion in open arenas and the ability to squeeze through confined environments––both of which we demonstrate using simple experiments. Our simple approach of harnessing elastic instabilities in soft structures to drive locomotion enables the design of novel shape-changing robots and other bioinspired machines at multiple scales.
Stretchable Nanolasing from Hybrid Quadrupole Plasmons
This paper reports a robust and stretchable nanolaser platform that can preserve its high mode quality by exploiting hybrid quadrupole plasmons as an optical feedback mechanism. Increasing the size of metal nanoparticles in an array can introduce ultra-sharp lattice plasmon resonances with out-of-plane charge oscillations that are tolerant to lateral strain. By patterning these nanoparticles onto an elastomeric slab surrounded by liquid gain, we realized reversible, tunable nanolasing with high strain sensitivity and no hysteresis. Furthermore, our semi-quantum modeling demonstrates that lasing build-up occurs at the hybrid quadrupole electromagnetic hot spots, which provides a route towards mechanical modulation of light-matter interactions on the nanoscale.
Biophysical characterization of the structural change of Nopp140, an intrinsically disordered protein, in the interaction with CK2α
Nucleolar phosphoprotein 140 (Nopp140) is a nucleolar protein, more than 80% of which is disordered. Previous studies have shown that the C-terminal region of Nopp140 (residues 568–596) interacts with protein kinase CK2α, and inhibits the catalytic activity of CK2. Although the region of Nopp140 responsible for the interaction with CK2α was identified, the structural features and the effect of this interaction on the structure of Nopp140 have not been defined due to the difficulty of structural characterization of disordered protein. In this study, the disordered feature of Nopp140 and the effect of CK2α on the structure of Nopp140 were examined using single-molecule fluorescence resonance energy transfer (smFRET) and electron paramagnetic resonance (EPR). The interaction with CK2α was increased conformational rigidity of the CK2α-interacting region of Nopp140 (Nopp140C), suggesting that the disordered and flexible conformation of Nopp140C became more rigid conformation as it binds to CK2α. In addition, site specific spin labeling and EPR analysis confirmed that the residues 574–589 of Nopp140 are critical for binding to CK2α. Similar technical approaches can be applied to analyze the conformational changes in other IDPs during their interactions with binding partners. - Highlights: • Nopp140 is intrinsically disordered protein (IDP). • Conformation of Nopp140 became more rigid conformation due to interaction with CK2α. • smFRET and EPR could be applied to analyze the structural changes of IDPs.
Selective liquid crystal molecule orientation on ion beam irradiated tantalum oxide ultrathin films
We recently achieved the homogeneous alignment of liquid crystal (LC) on amorphous Ta{sub 2}O{sub 5} layers. This study demonstrates that LC layers could be aligned either homogeneously or vertically by increasing the growth temperature of rf magnetron sputtering device and the irradiation time of the DuoPIGatron type Ar ion beam device causing uniform and dense plasma. We attained two LC orientations by observing Ta 4f and O 1s peak shifts with x-ray photoelectron spectroscopy. Moreover, the decreased thickness of layers with high-k dielectric constants helped to decrease driving LC voltages and in turn to achieve low power consumption.
Zinc oxide nanolevel surface transformation for liquid crystal orientation by ion bombardment
This paper introduces the characteristics of the zinc oxide (ZnO) inorganic film deposited by radio-frequency magnetron sputtering as an alternative alignment layer for liquid crystal display (LCD) applications. The crystalline structure related to the texture formation of ZnO (1013) was observed with a tilt angle of approximately 28.1 deg. to the ZnO (0001) plane, leading to a smooth surface and high-density structure. Ion beam (IB) bombardment at various incident angles was used to induce liquid crystal (LC) alignment and cause the measured pretilt angle on ZnO films to assume a triangular contour. The orientation order of liquid crystal molecules was due to the van der Waals force for the vertical alignment of LCs with selective breaking of O-Zn bonds by IB bombardment. The contact angle contour as a function of the IB incident angle resembled the behavior of the pretilt angle. The pretilt angle is controllable by adjusting the surface features on ZnO films with IB bombardment. The electro-optic characteristics of vertically aligned (VA)-LCD based on ZnO film were comparable to those of VA-LCD based on polyimide, showing good potential of ZnO film as a LC alignment layer.
Vertically aligned liquid crystals on a {gamma}-Al{sub 2}O{sub 3} alignment film using ion-beam irradiation
Using ion-beam (IB) irradiation, liquid crystals (LCs) were vertically aligned (VA) on a {gamma}-Al{sub 2}O{sub 3} alignment film. Atomic-layer deposition was used to orient the LCs on high-quality {gamma}-Al{sub 2}O{sub 3} alignment films. The LC molecule orientation indicates the vertical direction of the atomic-layer-deposited {gamma}-Al{sub 2}O{sub 3} alignment films. X-ray photoelectron spectroscopy showed that IB irradiation changed the chemical structure, shifting the Al-O binding energy and altering the Al-O bonding intensity. The low-voltage transmittance characteristics of the VA LC displays on the {gamma}-Al{sub 2}O{sub 3} alignment films were also measured, showing reduced voltage and power requirements.
Characterization of the InsP{sub 6}-dependent interaction between CK2 and Nopp140
Nopp140, a highly phosphorylated nucleolar protein, negatively regulates CK2, a kinase essential for cell proliferation. We quantitatively analyzed the interaction between two subunits of CK2 and Nopp140 and characterized the mechanism by which InsP{sub 6} inhibits the interaction. Nopp140 specifically binds to the catalytic subunit of CK2 (CK2{alpha}) with a dissociation constant of (K{sub d}) of 4 nM, which interferes with the catalytic activity of CK2. The C-terminal region of Nopp140 is determined as CK2{alpha}-binding region by a yeast two-hybrid method as well as a direct measurement of the interaction between CK2{alpha} and deletion mutants of Nopp140. InsP{sub 6} specifically binds to CK2{alpha} and disrupts the interaction between CK2{alpha} and Nopp140 with an IC{sub 50} value of 25 {mu}M, thereby attenuating the Nopp140-mediated repression of CK2 activity.