Engineering Papers⌕ Search

Engineering topics

Lee, J.

Publications and source records attributed to Lee, J..

At least 199 records · Page 11

Numerical and experimental evaluation of laser forming process for the shape correction in ultra high strength steels

In this paper, laser forming characteristics in ultra high strength steel with ultimate strength of 1200MPa are investigated numerically and experimentally. FE simulation is conducted to identify the response related to deformation and characterize the effect of laser power, beam diameter and scanning speed with respect to the bending angle for a square sheet part. The thermo-mechanical behaviors during the straight-line heating process are presented in terms of temperature, stress and strain. An experimental setup including a fiber laser with maximum mean power of 3.0 KW is used in the experiments. From the results in this work, it would be easily adjustment the laser power and the scanning speed by controlling the line energy for a bending operation of CP1180 steel sheets.

36 MATERIALS SCIENCE↗

In-Beam γ -Ray Spectroscopy of Mg 34 , 36 , 38 : Merging the N = 20 and N = 28 Shell Quenching

Neutron-rich N = 22, 24, 26 magnesium isotopes were studied in this paper via in-beam γ-ray spectroscopy at the RIKEN Radioactive Isotope Beam Factory following secondary fragmentation reactions on a carbon target at ≈ 200 MeV /nucleon. In the one- and two-proton removal channels from 39 Al and 40 Si beams, two distinct γ-ray transitions were observed in 38 Mg, while in the one-proton removal reaction from 37 Al a new transition was observed in addition to the known 2 + 1 → 0 + g.s. decay. From the experimental systematics and comparison to theoretical predictions it is concluded that the transitions belong to the 2 + 1 → 0 + g.s. and 4 + 1 → 2 + 1 decays in 36 Mg and 38 Mg, respectively. For 34 Mg, previously reported 2 + 1 and 4 + 1 level energies were remeasured. Finally, the deduced E(4 + 1 )/E(2 + 1 ) ratios for 34,36,38 Mg of 3.14(5), 3.07(5), and 3.07(5) are almost identical and suggest the emergence of a large area of deformation extending from the N = 20 to the N = 28 shell quenching.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Probing the Interplay between Quantum Charge Fluctuations and Magnetic Ordering in LuFe2O4

The mechanisms producing strong coupling between electric and magnetic order in multiferroics are not always well understood, since their microscopic origins can be quite different. Hence, gaining a deeper understanding of magnetoelectric coupling in these materials is the key to their rational design. Here, we use ultrafast optical spectroscopy to show that the influence of magnetic ordering on quantum charge fluctuations via the double-exchange mechanism can govern the interplay between electric polarization and magnetism in the charge-ordered multiferroic LuFe2O4.

MAGNETIC PROPERTIES AND MATERIALS↗

Management of salt waste from electrochemical processing of used nuclear fuel

Electrochemical processing of used nuclear fuel involves operation of one or more cells containing molten salt electrolyte. Processing of the fuel results in contamination of the salt via accumulation of fission products and transuranic (TRU) actinides. Upon reaching contamination limits, the salt must be removed and either disposed or treated to remove the contaminants and recycled back to the process. During development of the Experimental Breeder Reactor-II spent fuel treatment process, waste salt from the electro-refiner was to be stabilized in a ceramic waste form and disposed of in a high-level waste repository. With the cancellation of the Yucca Mountain high-level waste repository, other options are now being considered. One approach that involves direct disposal of the salt in a geologic salt formation has been evaluated. While waste forms such as the ceramic provide near-term resistance to corrosion, they may not be necessary to ensure adequate performance of the repository. To improve the feasibility of direct disposal, recycling a substantial fraction of the useful salt back to the process equipment could minimize the volume of the waste. Experiments have been run in which a cold finger is used for this purpose to crystallize LiCl from LiCl/CsCl. If it is found to be unsuitable for transportation, the salt waste could also be immobilized in zeolite without conversion to the ceramic waste form. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Comparison Between NPP-VIIRS Aerosol Data Products and the MODIS AQUA Deep Blue Collection 6 Dataset Over Land

Aerosols are small particles suspended in the atmosphere and have a variety of natural and man-made sources. Knowledge of aerosol optical depth (AOD), which is a measure of the amount of aerosol in the atmosphere, and its change over time, is important for multiple reasons. These include climate change, air quality (pollution) monitoring, monitoring hazards such as dust storms and volcanic ash, monitoring smoke from biomass burning, determining potential energy yields from solar plants, determining visibility at sea, estimating fertilization of oceans and rainforests by transported mineral dust, understanding changes in weather brought upon by the interaction of aerosols and clouds, and more. The Suomi-NPP satellite was launched late in 2011. The Visible Infrared Imaging Radiometer Suite (VIIRS) aboard Suomi-NPP is being used, among other things, to determine AOD. This study compares the VIIRS dataset to ground-based measurements of AOD, along with a state-of-the-art satellite AOD dataset (the new version of the Moderate Resolution Imaging Spectrometer Deep Blue algorithm) to assess its reliability. The Suomi-NPP satellite was launched late in 2011, carrying several instruments designed to continue the biogeophysical data records of current and previous satellite sensors. The Visible Infrared Imaging Radiometer Suite (VIIRS) aboard Suomi-NPP is being used, among other things, to determine aerosol optical depth (AOD), and related activities since launch have been focused towards validating and understanding this new dataset through comparisons with other satellite and ground-based products. The operational VIIRS AOD product is compared over land with AOD derived from Moderate Resolution Imaging Spectrometer (MODIS) observations using the Deep Blue (DB) algorithm from the forthcoming Collection 6 of MODIS data

Sayer, Andrew M.↗

AggModel: A soil organic matter model with measurable pools for use in incubation studies

Current soil organic matter (SOM) models are empirical in nature by employing few conceptual SOM pools that have a specific turnover time, but that are not measurable and have no direct relationship with soil structural properties. Most soil particles are held together in aggregates and the number, size and stability of these aggregates significantly affect the size and amount of organic matter contained in these aggregates, and its susceptibility to decomposition. While it has been shown that soil aggregates and their dynamics can be measured directly in the laboratory and in the field, the impact of soil aggregate dynamics on SOM decomposition has not been explicitly incorporated in ecosystem models. Here, we present AggModel, a conceptual and simulation model that integrates soil aggregate and SOM dynamics. In AggModel, we consider unaggregated and microaggregated soil that can exist within or external to macroaggregated soil. Each of the four aggregate size classes contains particulate organic matter and mineral-associated organic matter fractions. We used published data from laboratory incubations to calibrate and validate the biological and environmental effects on the rate of formation and breakdown of macroaggregates and microaggregates, and the organic matter dynamics within these different aggregate fractions. After calibration, AggModel explained more than 70% of the variation in aggregate masses and over 90% of the variation in aggregate-associated carbon. The model estimated the turnover time of macroaggregates as 32 days and 166 days for microaggregates. Sensitivity analysis of AggModel parameterization supported the notion that macroaggregate turnover rate has a strong control over microaggregate masses and, hence, carbon sequestration. In addition to AggModel being a proof-of-concept, the advantage of a model that is based on measurable SOM fractions is that its internal structure and dynamics can be directly calibrated and validated by using experimental data. In conclusion, AggModel successfully incorporates the explicit representation for the turnover of soil aggregates and their influence on SOM dynamics and can form the basis for new SOM modules within existing ecosystem models.

Macroaggregates↗