Engineering Papers⌕ Search

Engineering topics

Lee, G.

Publications and source records attributed to Lee, G..

At least 19 records

Event generators for high-energy physics experiments

We provide an overview of the status of Monte-Carlo event generators for high-energy particle physics. Guided by the experimental needs and requirements, we highlight areas of active development, and opportunities for future improvements. Particular emphasis is given to physics models and algorithms that are employed across a variety of experiments. These common themes in event generator development lead to a more comprehensive understanding of physics at the highest energies and intensities, and allow models to be tested against a wealth of data that have been accumulated over the past decades. A cohesive approach to event generator development will allow these models to be further improved and systematic uncertainties to be reduced, directly contributing to future experimental success. Event generators are part of a much larger ecosystem of computational tools. They typically involve a number of unknown model parameters that must be tuned to experimental data, while maintaining the integrity of the underlying physics models. Making both these data, and the analyses with which they have been obtained accessible to future users is an essential aspect of open science and data preservation. It ensures the consistency of physics models across a variety of experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Higgs-mass predictions in the MSSM and beyond

Abstract Predictions for the Higgs masses are a distinctive feature of supersymmetric extensions of the Standard Model, where they play a crucial role in constraining the parameter space. The discovery of a Higgs boson and the remarkably precise measurement of its mass at the LHC have spurred new efforts aimed at improving the accuracy of the theoretical predictions for the Higgs masses in supersymmetric models. The “ Precision SUSY Higgs Mass Calculation Initiative ” (KUTS) was launched in 2014 to provide a forum for discussions between the different groups involved in these efforts. This report aims to present a comprehensive overview of the current status of Higgs-mass calculations in supersymmetric models, to document the many advances that were achieved in recent years and were discussed during the KUTS meetings, and to outline the prospects for future improvements in these calculations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Enterprise Credentialing Service Statement of Work (SOW)

The scope of this project includes providing professional services in support of the development and deployment of an Enterprise Credentialing Service for the Department of Energy (DOE) National Nuclear Security Administration (NNSA), which will be used for issuing and managing credentials used for authentication, digital signature, and encryption functions by users, applications, and devices in a closed computing environment. The Seller shall provide subject matter expertise for the design and deployment of the technologies and processes that comprise the Enterprise Credentialing Service, which will include a public key infrastructure (PKI) and a credential management system (CMS) that issues and manages PKI-based smartcard credentials. The Enterprise Credentialing Service will support approximately 17,000 users at 15 DOE NNSA sites and laboratories located across the continental United States.

97 MATHEMATICS AND COMPUTING↗

Model Fit to Experimental Data for Foam-Assisted Deep Vadose Zone Remediation

Foam has been regarded as a promising means of remeidal amendment delivery to overcome subsurface heterogeneity in subsurface remediation processes. This study investigates how a foam model, developed by Method of Characteristics and fractional flow analysis in the companion paper of Roostapour and Kam (2012), can be applied to make a fit to a set of existing laboratory flow experiments (Zhong et al., 2009) in an application relevant to deep vadose zone remediation. This study reveals a few important insights regarding foam-assisted deep vadose zone remediation: (i) the mathematical framework established for foam modeling can fit typical flow experiments matching wave velocities, saturation history , and pressure responses; (ii) the set of input parameters may not be unique for the fit, and therefore conducting experiments to measure basic model parameters related to relative permeability, initial and residual saturations, surfactant adsorption and so on should not be overlooked; and (iii) gas compressibility plays an important role for data analysis, thus should be handled carefully in laboratory flow experiments. Foam kinetics, causing foam texture to reach its steady-state value slowly, may impose additional complications.

Roostapour, A.↗

Well Developed Deformation in Si 42

For this research, excited states in 38,40,42 Si nuclei have been studied via in-beam γ-ray spectroscopy with multinucleon removal reactions. Intense radioactive beams of 40 S and 44 S provided at the new facility of the RIKEN Radioactive Isotope Beam Factory enabled γ-γ coincidence measurements. A prominent γ line observed with an energy of 742(8) keV in 42 Si confirms the 2 + state reported in an earlier study. Among the γ lines observed in coincidence with the 2 + → 0 + transition, the most probable candidate for the transition from the yrast 4 + state was identified, leading to a 4 1 + energy of 2173(14) keV. The energy ratio of 2.93(5) between the 2 1 + and 4 1 + states indicates well-developed deformation in 42 Si at N = 28 and Z = 1 . Also for 38,40 Si energy ratios with values of 2.09(5) and 2.56(5) were obtained. Finally, together with the ratio for 42 Si, the results show a rapid deformation development of Si isotopes from N = 24 to N = 28.

07 ISOTOPE AND RADIATION SOURCES↗

Full-Duplex Digital Communication on a Single Laser Beam

A proposed free-space optical communication system would operate in a full-duplex mode, using a single constant-power laser beam for transmission and reception of binary signals at both ends of the free-space optical path. The system was conceived for two-way data communication between a ground station and a spacecraft in a low orbit around the Earth. It has been estimated that in this application, a data rate of 10 kb/s could be achieved at a ground-station-to-spacecraft distance of 320 km, using a laser power of only 100 mW. The basic system concept is also applicable to terrestrial free-space optical communications. The system (see figure) would include a diode laser at one end of the link (originally, the ground station) and a liquid-crystal- based retroreflecting modulator at the other end of the link (originally, the spacecraft). At the laser end, the beam to be transmitted would be made to pass through a quarter-wave plate, which would convert its linear polarization to right circular polarization. For transmission of data from the laser end to the retroreflector end, the laser beam would be modulated with subcarrier phase-shift keying (SC-PSK). The transmitted beam would then pass through an aperture- sharing element (ASE) - basically, a mirror with a hole in it, used to separate the paths of the transmitted and received light beams. The transmitted beam would continue outward through a telescope (which, in the original application, would be equipped with a spacecraft-tracking system) that would launch the transmitted beam along the free-space optical path to the retroreflector end.

Hazzard, D. A.↗

The exploration of Mars

Explore the source record for details and available documents.

Mars robot Viking Pathfinder Mars Global Surveyor↗

The exploration of Mars

Explore the source record for details and available documents.

Mars MOLA Mars Orbital Laser Altimeter↗

Astro-1 and ground-based observations of Markarian 335: Evidence for an accretion disk

Simultaneous UV and optical observations of the Seyfert galaxy Markarian 335 (z = 0.026) during the Astro-1 mission yield a spectrum spanning the wavelength range of 912-8410 A. In the sub-Ly alpha region a prominent blended emission feature of O VI lambda lambda 1032, 1038, and Ly beta is nearly as strong as C IV wavelength 1549. The continuum flux extends beyond the redshifted Luman limit without a noticeable discontinuity, but a siginificant change in slope exists near the redhsifted Lyman edge. We suggest that such a change may be the signature of a Lyman edge in an accretion disk seen at a small inclination angle. Using a disk model including such an edge, we fit the spectrum with a central black hole mass of 5 x 10(exp 7) solar mass, an accretion rate of 0.07 solar mass/yr, and an optical depth at the Lyman edge of 0.4. To account for the strong O VI emission as well as the soft X-ray excess, we consider the effects of Comptonization on the disk spectrum, which can produce a high-energy tail for the UV bump and also smooth the Lyman edge feature.

Zheng, W.↗

Modeling of Lyman edge features in accretion disk spectra

We consider two possibilities which can change the spectral shape of the Lyman-limit region in the radiation emitted by the accretion disks of Active Galactic Nuclei (AGN) and quasars. One is the effect produced by the strong gravitational field of the black hole, and the other is Comptonization of the emitted disk spectrum by a surrounding hot corona. We present synthesized spectra in the region of the Lyman limit for optically thick, geometrically thin accretion disk models incorporating the above two effects.

Lee, G.↗