Engineering Papers⌕ Search

Engineering topics

Lee, Clement G.

Publications and source records attributed to Lee, Clement G..

Micro-meteoroid and orbital debris radar from Goldstone Radar observations

Micro-meteoroid and orbital debris (MMOD) refers to millions of micrometeoroids and orbital debris orbiting the Earth, which can come from remaining parts of spacecraft from previous missions. These debris objects keep colliding and creating new pieces of debris, with very different sizes ranging from millimeters to meters. About 99.3% of the debris objects have a size < 1 cm. These debris objects, traveling at speeds of 10 km/s, can cause significant damage to spacecraft, satellites, and astronauts. Despite the historic use of shielding to protect vital spacecraft components, MMOD still present a potential hazard for future missions and operations involving humans in space. Goldstone’s orbital debris radar (ODR) enhances the NASA orbital debris model with radar observation data, providing vital information on orbital debris detections: size, Doppler, range, and orbit inclination angle. These observations currently provide the only access to information about this size class (2 mm to 10 mm) of orbital debris. Goldstone’s ODR experiments operate as a bistatic radar, with overlapping beams providing a wide distribution of ranges. From 2004 to early 2018, Goldstone’s ODR has been collecting orbital debris data from altitudes covering 280 km to 3000 km. Since the decommissioning of the receive antenna in early 2018, Goldstone’s range coverage is reduced to a 300 km window within a 600 km to 1000 km potential range coverage, depending on the pointing geometry and antenna station used. We are investigating alternative transmit receive configurations at Goldstone to recover our previous wide range coverage.

Rodriguez-Alvarez, Nereida↗

Goldstone Radar Observations of Horseshoe-orbiting Near-Earth Asteroid 2013 BS45, a Potential Mission Target

We report radar observations of near-Earth asteroid 2013 BS45 obtained during the 2013 apparition. This object is in a resonant, Earth-like orbit, and it is a backup target for NASA’s NEA Scout mission. 2013 BS45 belongs to the Arjuna orbital domain, which currently has ∼20 discovered representatives. These objects tend to be small and difficult to characterize, and 2013 BS45 is only the third Arjuna object observed with radar to date. We observed 2013 BS45 on three days at Goldstone (8560 MHz, 3.5 cm) between 2013 February 10 and 13. The closest approach occurred on February 12 at a distance of 0.0126 au. We obtained relatively weak echo power spectra and ranging data at resolutions up to 0.125 μs (18.75 m px{sup −1}). The Doppler broadening of the echo power spectra strongly suggests an upper bound on the rotation period of 1.9 minutes. The radar data, in combination with an assumption that the asteroid’s radar albedo is no higher than that of metallic NEA 1986 DA, constrain the equivalent diameter to 15 m ≤ D ≤ 38 m. The circular polarization ratio is 0.21 ± 0.06, which implies a near-surface that is relatively smooth on decimeter spatial scales. We bounded the OC radar albedo to η {sub OC} ≥ 0.09 and the optical albedo remains relatively unconstrained at 0.05 ≤ p {sub V} ≤ 0.35. The Yarkovsky acceleration has not been detected but, due to the object’s rapid rotation, would be dominated by a seasonal component whose direction and magnitude depends on the currently unknown pole orientation and thermal inertia.

79 ASTRONOMY AND ASTROPHYSICS↗

Programmable Oscillator

A programmable oscillator is a frequency synthesizer with an output phase that tracks an arbitrary function. An offset, phase-locked loop circuit is used in combination with an error control feedback loop to precisely control the output phase of the oscillator. To down-convert the received signal, several stages of mixing may be employed with the compensation for the time-base distortion of the carrier occurring at any one of those stages. In the Goldstone Solar System Radar (GSSR), the compensation occurs in the mixing from an intermediate frequency (IF), whose value is dependent on the station and band, to a common IF used in the final stage of down-conversion to baseband. The programmable oscillator (PO) is used in the final stage of down-conversion to generate the IF, along with a time-varying phase component that matches the time-base distortion of the carrier, thus removing it from the final down-converted signal.

Quirk, Kevin J.↗

Photon Counting Techniques for the Bandlimited Optical Channel

Two methods of estimating received photon counts given a realistic noisy and bandlimited optical channel are presented. The function of estimating photon counts is critical in any optical communications receiver. The purpose of this work is to compare two methods, neither of which is generically optimal, with realistic channels-for the purpose of assessing which is more appropriate for application in a hardware receiver given the current state-of-the art.

photons↗