Engineering Papers⌕ Search

Engineering topics

Lee, C. M.

Publications and source records attributed to Lee, C. M..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Focused Schlieren flow visualization studies of multiple venturi fuel injectors in a high pressure combustor

Multiple venturi fuel injectors were used to obtain uniform fuel distributions, better atomization and vaporization in the premixing/prevaporizing section of a lean premixed/prevaporized flame tube combustor. A focused Schlieren system was used to investigate the fuel/air mixing effectiveness of various fuel injection configurations. The Schlieren system was focused to a plane within the flow field of a test section equipped with optical windows. The focused image plane was parallel to the axial direction of the flow and normal to the optical axis. Images from that focused plane, formed by refracted light due to density gradients within the flow field, were filmed with a high-speed movie camera at framing rates of 8,000 frames per second (fps). Three fuel injection concepts were investigated by taking high-speed movies of the mixture flows at various operating conditions. The inlet air temperature was varied from 600 F to 1000 F, and inlet pressures from 80 psia to 150 psia. Jet-A fuel was used typically at an equivalence ratio of 0.5. The intensity variations of the digitized Schlieren images were analytically correlated to spatial density gradients of the mixture flows. Qualitative measurements for degree of mixedness, intensity of mixing, and mixing completion time are shown. Various mixing performance patterns are presented with different configurations of fuel injection points and operating conditions.

Chun, K. S.↗
NASA NTRS1989

Strain measurements in a rotary engine housing

The development of structural design tools for Rotary Combustion Engines (RCE) using Finite Element Modeling (FEM) requires knowledge about the response of engine materials to various service conditions. This paper describes experimental work that studied housing deformation as a result of thermal, pressure and mechanical loads. The measurement of thermal loads, clamping pressure, and deformation was accomplished by use of high-temperature strain gauges, thermocouples, and a high speed data acquisition system. FEM models for heat transfer stress analysis of the rotor housing will be verified and refined based on these experimental results.

Lee, C. M.↗
NASA NTRS1989

High speed commercial transport fuels considerations and research needs

NASA is currently evaluating the potential of incorporating High Speed Civil Transport (HSCT) aircraft in the commercial fleet in the beginning of the 21st century. NASA sponsored HSCT enabling studies currently underway with airframers and engine manufacturers, are addressing a broad range of technical, environmental, economic, and related issues. Supersonic cruise speeds for these aircraft were originally focused in the Mach 2 to 5 range. At these flight speeds, both jet fuels and liquid methane were considered potential fuel candidates. For the year 2000 to 2010, cruise Mach numbers of 2 to 3+ are projected for aircraft fuel with thermally stable liquid jet fuels. For 2015 and beyond, liquid methane fueled aircraft cruising at Mach numbers of 4+ may be viable candidates. Operation at supersonic speeds will be much more severe than those encountered at subsonic flight. One of the most critical problems is the potential deterioration of the fuel due to the high temperature environment. HSCT fuels will not only be required to provide the energy necessary for flight, but will also be subject to aerodynamic heating and, will be required to serve as the primary heat sink for cooling the engine and airframe. To define fuel problems for high speed flight, a fuels workshop was conducted at NASA Lewis Research Center. The purpose of the workshop was to gather experts on aviation fuels, airframe fuel systems, airport infrastructure, and combustion systems to discuss high speed fuel alternatives, fuel supply scenarios, increased thermal stability approaches and measurements, safety considerations, and to provide directional guidance for future R and D efforts. Subsequent follow-up studies defined airport infrastructure impacts of high speed fuel candidates. The results of these activities are summarized. In addition, an initial case study using modified in-house refinery simulation model Gordian code (1) is briefly discussed. This code can be used to simulate different types of refineries, emphasizing jet fuel production and relative cost factors.

Lee, C. M.↗
NASA NTRS1987

Estimation of instantaneous heat transfer coefficients for a direct-injection stratified-charge rotary engine

The main objective of this report was to derive equations to estimate heat transfer coefficients in both the combustion chamber and coolant pasage of a rotary engine. This was accomplished by making detailed temperature and pressure measurements in a direct-injection stratified-charge rotary engine under a range of conditions. For each sppecific measurement point, the local physical properties of the fluids were calculated. Then an empirical correlation of the coefficients was derived by using a multiple regression program. This correlation expresses the Nusselt number as a function of the Prandtl number and Reynolds number.

Lee, C. M.↗
NASA NTRS1987

Performance and efficiency evaluation and heat release study of a direct-injection stratified-charge rotary engine

A computer simulation which models engine performance of the Direct Injection Stratified Charge (DISC) rotary engines was used to study the effect of variations in engine design and operating parameters on engine performance and efficiency of an Outboard Marine Corporation (OMC) experimental rotary combustion engine. Engine pressure data were used in a heat release analysis to study the effects of heat transfer, leakage, and crevice flows. Predicted engine data were compared with experimental test data over a range of engine speeds and loads. An examination of methods to improve the performance of the rotary engine using advanced heat engine concepts such as faster combustion, reduced leakage, and turbocharging is also presented.

Nguyen, H. L.↗
NASA NTRS1986

The Space Transportation System

The accomplishments and present budget concerns of the Space Transportation System (STS) program are discussed. The Shuttle, with the most advanced operational engine in the world and the largest rocket motor and external tank ever developed, is shown to be a successful, state-of-the-art achievement with enormous capabilities for future exploitation. The readjusted price of $71M (1982$) for a dedicated mission for the period FY 86-FY 88 is nearly twice the price estimated at the beginning of the 12-year program. Additional flights above the sixteen plus missions necessary for the U.S. government's NASA and DOD National Security payloads, are offered to U.S. and foreign, commercial and civil customers, to help recover the marginal costs of anticipated future payloads. Aspects of the present bid scheme, with a $74.0M (82$) minimum bid commencing with FY 1989, are discussed.

Lee, C. M.↗
NASA NTRS1984

The US re-usable launch system - The Space Shuttle

The NASA Space Shuttle furnishes a range of readily available, and either already planned or yet-to-be-defined services, which already encompass satellite on-orbit servicing, refueling and repair, and satellite retrieval services. A gradual expansion will be made of services that capitalize on the presence of a large crew during commercial and scientific operations, while pursuing the development of automated, standardized procedures for the handling of experiments in order to reduce research costs.

Lee, C. M.↗
NASA NTRS1982

STS pricing policy

In 1977 NASA published Shuttle Reimbursement Policies for Civil U.S. Government, DOD and Commercial and Foreign Users. These policies were based on the principle of total cost recovery over a period of time with a fixed flat price for initial period to time to enhance transition. This fixed period was to be followed with annual adjustments thereafter, NASA is establishing a new price for 1986 and beyond. In order to recover costs, that price must be higher than the initial fixed price through FY 1985. NASA intends to remain competitive. Competitive posture includes not only price, but other factors such as assured launch, reliability, and unique services. NASA's pricing policy considers all these factors.

Lee, C. M.↗
NASA NTRS1981

STS operations planning - Current status and outlook for the future

Consideration is given to the status of Space Shuttle operations planning and outlook for the period 1982-94, with some speculations on Shuttle-related space operations early in the next century. Attention is given to the evolution of Shuttle payload capabilities over the next five years. The following list of near-earth environment factors to be exploited by the Space Shuttle is given: (1) easy control of gravity; (2) absence of atmosphere; (3) a comprehensive view of the earth's surface and atmosphere; (4) isolation of hazardous processes from earth biosphere; (5) freely available light, heat and photovoltaic power; (6) an infinite natural reservoir for the disposal of radioactive waste products; and (7) a super-cold heat sink.

Lee, C. M.↗
NASA NTRS1980

Space Shuttle capabilities, constraints, and cost

The capabilities, constraints, and costs of the Space Transportation System (STS), which combines reusable and expendable components, are reviewed, and an overview of the current planning activities for operating the STS in an efficient and cost-effective manner is presented. Traffic forecasts, performance constraints and enhancements, and potential new applications are discussed. Attention is given to operating costs, pricing policies, and the steps involved in 'getting on board', which includes all the interfaces between NASA and the users necessary to come to launch service agreements.

Lee, C. M.↗
NASA NTRS1979

Getaway specials

The NASA Small Self-Contained Payload or 'Getaway Special' program, allowing small experimental payloads to be flown on the Space Shuttle at low cost, is presented. The program allows any responsible person, organization or educational institution able to enter into a contract with NASA to fly a self-contained research and development payload compatible with spacecraft requirements and of weight less than 200 lb and volume less than 5 cu ft on the Space Shuttle, subject to space availability. Charges, based on package volume, range from $3000 to $10,000 in 1975 dollars, with a $500 deposit required as earnest money. NASA, in turn, will supply the shuttle flight and return, planning and technical information, the cylindrical container in which the payload is carried, control signals from the crew station, electrical power to the payload if available, elementary crew support, prelaunch testing or servicing and postflight information. Procedures for program participation are outlined.

Lee, C. M.↗
NASA NTRS1979

Quantitative energy extraction measurements in a photoionization-stabilized self-sustained XeF laser

Detailed time-correlated gain, fluorescence, and laser energy measurements were used to obtain quantitative data on energy extraction efficiencies for a photoionization-stabilized self-sustained XeF laser. A current pulse of 25 ns full width at half-maximum produced an 80-cu-cm XeF plasma in NF3:Xe:He gas mixtures with a maximum output energy of 80 mJ. The results show that the maximum small-signal gain and the maximum specific output energy is proportional to the NF3 content of the gas mixture. This suggests that there is an optimum fractional utilization of the NF3 molecules in the discharge. Under high-gain conditions, 30-40% of the energy stored in XeF(asterisk) can be extracted in a gain-switched pulse. The output energy represents less than 1% of the input energy.

Lee, C. M.↗
NASA NTRS1979

Space Transportation systems overview

Planning for the operations phase of the Space Transportation system is reviewed. Attention is given to mission profile (typical), applications, manifesting rationale, the Operational Flight Test manifest, the operations manifest, pricing policy, and potential applications of the STS.

Lee, C. M.↗
NASA NTRS1978

Shuttle mission plans

Shuttle mission plans recently developed by NASA for the time period 1980-1991 are presented. Standard and optional services, which will be available to users of the Space Transportation System (STS) when it becomes operational in the 1980's, are described. Pricing policies established by NASA to encourage use of the STS by commercial, foreign and other U.S. Government users are explained. The small Self-Contained Payload Program, which will make space flight opportunities available to private citizens and individual experimenters who wish to use the Space Shuttle for investigative research, is discussed.

Visentine, J. T.↗
NASA NTRS1977

Organizing for low cost space transportation

The paper describes the management concepts and organizational structure NASA is establishing to operate the Space Transportation System. Policies which would encourage public and commercial organizations and private individuals to use the new STS are discussed, and design criteria for experiments, spacecraft, and other systems elements are considered. The design criteria are intented to facilitate cost reductions for space operations. NASA plans for the transition from currently used expendable launch vehicles to Shuttle use and Shuttle pricing policies are explained in detail. Hardware development is basically complete, management functions have been defined, pricing policies have been published, and procedures for user contact and services have been places into operation.

Lee, C. M.↗
NASA NTRS1977

Apollo Soyuz mission report

A complete report on the goals and results of the Apollo-Soyuz mission is presented. Descriptions of the docking module, command and service modules and crew stations are provided. The overall performance of the Apollo spacecraft and of ground support and biomedical operations is evaluated. The pilot's report is presented, together with launch phase and anomaly summaries.

Lee, C. M.↗
NASA NTRS1976

Pulser-sustainer glow discharge operation in static carbon monoxide laser mixtures

Successful operation of the pulser-sustainer concept is reported in large volume static room temperature CO laser mixes. High voltage pulses and ultraviolet sparks at 33 kHz combined with a separate low voltage sustainer electric field produce spatially uniform plasmas in a 3.0 liter volume. Completely independent control of ne and E/N is demonstrated. The tests are preliminary to testing of the concept in supersonic flow.

Monson, D. J.↗