Engineering Papers⌕ Search

Engineering topics

Landi, E.

Publications and source records attributed to Landi, E..

At least 55 records · Page 3

Overview of STEREO/EUVI and SOHO/EIT Data during the WHI Campaign

The poster will present an overview of the data from the March-April,2008 Whole Heliospheric Interval Campaign. These instruments will show the targets during the campaign from three points of view at a range of temperatures. Targets are expected to include coronal cavities, coronal holes, active regions and prominences.

Kucera, Therese A.↗

Atomic Data and Spectral Line Intensities for Be-like Ions

Atomic data and collision rates are needed to model the spectrum of optically thin astrophysical sources. Recent observations from solar instrumentation such as SOH0 and Hinode have revealed the presence of hosts of lines emitted by high-energy configurations from ions belonging to the Be-like to the 0-like isoelectronic sequences. Data for such configurations are often unavailable in the literature. We have started a program to calculate the atomic parameters and rates for the high-energy configurations of Be-like ions of the type ls2.21.nl' where n=3,4,5. We report on the results of this project and on the diagnostic application of the predicted spectral lines.

Bhatia, Anand↗

Observation of Low Level Heating in an Erupting Prominence

We present multi-wavelength observations of low level heating in an erupting prominence observed in the UV and EUV over a wide range of temperatures and wavelengths by SOHO's SUMER instrument, TRACE and also in H-alpha by the Yunnan Astronomical Observatory. The eruption occurred on 2004 April 30. The heating is relatively mild, leading only to the ionization of neutral hydrogen and probably helium. It is also localized, occurring along the bottom edge of the erupting prominence and in a kink-like feature in the prominence. The heating is revealed as a decrease in the Lyman absorption. This decrease results in an apparent increase in emission in all the lines observed by SUMER, especially those formed at temperatures approx. 10(exp 5). However, this is due to the disappearance of cooler absorbing material in the prominence rather than an increase in these higher temperature species.

Kucera, Theresa↗

Atomic Data and Spectral Line Intensities for CA XVII

Electron impact collision strengths, energy levels, oscillator strengths and spontaneous radiative decay rates are calculated for Ca XVII. The configurations used are 2s(sup 2), 2s2p, 2p(sup 2), 2l3l', 214l' and 2s5l', with l = s,p and l' = s,p, d giving rise to 92 fine-structure levels in intermediate coupling. Collision strengths are calculated at seven incident energies (15, 30, 75, 112.5, 150, 187.5 and 225 Ry) for the transitions within the three lowest configurations corresponding to the 10 lowest energy levels, and five incident energies (75, 112.5, 150, 187.5 and 225 Ry) for transitions between the lowest five levels and the n = 3,4,5 configurations. Calculations have been carried out using the distorted wave approximation. Excitation rate coefficients are calculated as a function of electron temperature by assuming a Maxwellian electron velocity distribution. Using the excitation rate coefficients and the radiative transition rates of the present work, and R-Matrix results for the 2s2, 2s2p, 2p2 configurations available in the literature, statistical equilibrium equations for level populations are solved at electron densities covering the range of 10(exp 8)-10(exp 14)/cu cm at an electron temperature of log Te(K)=6.7, corresponding to the maximum abundance of Ca XVII. Spectral line intensities are calculated, and their diagnostic relevance L; discussed. This dataset will be made available in the next version of the CHIANTI database.

Bhatia, A.K.↗

Dynamic Features in and nearby a Prominence

We will discuss the thermal and dynamic properties of dynamic structures in and around a prominence channel observed on the limb on 17 April 2003. Observations were taken with the Solar and Heliospheric Observatory's Solar Ultraviolet Measurements of Emitted Radiation (SOHO/SUMER) in lines formed at temperatures from 80,000 to 1.6 million K. The instrument was pointed to a single location and took a series of 90 s exposures. Two-dimensional context was provided by the Transition Region and Coronal Explorer (TRACE) in the UV and EUV and by the Kanzelhohe Solar Observatory in H-alpha. Two dynamic features were studied in depth: a prominence activation and repeated motions in a loop nearby the prominence. We were able to calculate three-dimensional geometries and trajectories, differential emission measure, and limits on the average density, kinetic and thermal energies. These observations provide important tests for models of dynamics in prominences and cool (approx.10(exp 5) K) loops.

Kucera, T.↗

Prominence and Cool Loop Energetics Measured in the UV, EUV, and H-alpha

We investigate the thermal and dynamic properties of moving features in a prominence jet, a approx. 10(exp 5)K loop near a prominence channel, and an erupting prominence. In order to make measurements of the quickly moving features seen in prominences in the UV we use the SOHO/SUMER spectrograph to take a time series of exposures from a single pointing position, providing a measurement of spectral line properties as a function of time and position along the slit. The lines observed cover a broad range of temperatures from 80,000 - 1.6 million K. These measurements are combined with TRACE movies in transition region and coronal temperature bands and with ground based H-alpha data to obtain more complete information concerning prominence structure and motions. The resulting observations allow us perform DEM analysis and to calculate limits on densities, pressures, and the thermal and kinetic energies of the moving sources.

Kucera, Therese A.↗

Thermal Analysis of Post-eruption Loops from 80,000 to 1.6 million K

We analyze the thermal properties of a set of post eruptive loops which appeared after a prominence eruption on April 30, 2004. The event was observed by TRACE and SOHO/SUMER. The SUMER data was taken from a single slit location with a 90 second cadence and included a number of lines spanning the temperature range 80,000 to 1.6 million K. We perform a differential emission measure analysis of the loops in order to study their thermal evolution.

Kucera, T.↗

The High Temperature Response of the TRACE 171 Angstrom and 195 Angstrom Channels

The CHIANTI spectral code is used to estimate line and continuum intensity contributions to the TRACE 171 Angstrom and 195 Angstrom channels, widely used for imaging a variety of solar features and phenomena, including quiet Sun and active region loops and solar flares. It is shown that the 171 Angstrom channel has a high-temperature response, so high-temperature (approx. 10 MK) features in flares, prominent in TRACE 195 approx.\AA\ images as well as X-ray images from Yohkoh and RHESSI, are sometimes visible in images made in the 171 Angstrom channel. Such features consist of hot loop-top emission, either confined spots or 'spine' structures in loop arcades. This is illustrated with TRACE and X-ray flare images.

Phillips, K. J. H.↗

Spectral Atlas of X-ray Lines Emitted During Solar Flares Based on CHIANTI

A spectral atlas of X-ray lines in the wavelength range 7.47-18.97 Angstroms is presented, based on high-resolution spectra obtained during two M-class solar flares (on 1980 August 25 and 1985 July 2) with the Flat Crystal Spectrometer on board the Solar Maximum Mission. The physical properties of the flaring plasmas are derived as a function of time using strong, isolated lines. From these properties predicted spectra using the CHIANTI database have been obtained which were then compared with wavelengths and fluxes of lines in the observed spectra to establish line identifications. identifications for nearly all the observed lines in the resulting atlas are given, with some significant corrections to previous analysis of these flare spectra.

Landi, E.↗

Thermal and Kinetic Properties of Motions in a Prominence Activation and Nearby Loop

We perform a quantitative analysis of the thermal properties of a prominence activation and motions in a nearby loop. In order to make measurements of the quickly moving features seen in prominences in the UV we use the SOHO/SUMER spectrograph to take a time series of exposures from a single pointing position, providing a measurement of spectral line properties as a function of time and position along the slit. The lines observed cover a broad range of temperatures from 80,000 - 1.6 million K. These measurements are combined with TRACE movies in transition region and coronal temperature bands to obtain more complete information concerning prominence structure and motions. The resulting observations allow us to analyze the thermal and kinetic energy of the moving sources as functions of time. The loop and prominence are most apparent in lines formed at temperatures below 250,000 K. We find that in most cases the temperature distribution of plasma in a moving feature changes relatively little over time periods of about 20 minutes.

Kucera, Therese↗

Prominence Energetics Measured with SOHO/SUMER and TRACE

The mechanisms by which solar prominences are filled with plasma are still undetermined. In this study we perform a quantitative analysis of the thermal properties of moving features in prominences in order to put constraints on models of prominence formation and dynamics. In order to make such measurements of the quickly moving features seen in prominences in the W we use the SOHO/SUMER spectrograph to take a time series of exposures from a single pointing position, providing a measurement of spectral line properties as a function of time and position along the slit. temperatures from 80,000 - 1.6 million K. These measurements are combined with TRACE movies in transition region and coronal temperature bands to obtain more complete information concerning prominence structure and motions. The resulting observations allow us to analyze the thermal and kinetic energy of the moving prominence sources as functions of time.

Kucera, T.↗

Atomic Data and Spectral Line Intensities for Ne III

Electron impact collision strengths, energy levels, oscillator strengths, and spontaneous radiative decay rates are calculated for Ne III. The configurations used are 2s(sup 2)2p(sup 4), 2s2p(sup 5), 2p(sup 6), 2s(sup 2)2p(sup 3)3(sub s), 2s(sup 2)2p(sup 3)3p, and 2s(sup 2)2p(sup 3)3d giving rise to 86 fine-structure levels in intermediate coupling. Collision strengths are calculated at five incident energies, 5.2, 10, 15, 20 and 25 Ry. Excitation rate coefficients are calculated as a function of electron temperature by assuming a Maxwellian electron velocity distribution. Using the excitation rate coefficients and the radiative transition rates, statistical equilibrium equations for level populations are solved at electron densities covering the range of 10(exp 8) - 10(exp 14)/cc at an electron temperature of logTe/K = 5.0, corresponding to maximum abundance of Ne III. Relative spectral line intensities are calculated.

Landi, E.↗

Atomic Data and Spectral Line Intensities for Ar XII

Electron impact collision strengths; energy levels; oscillator strengths and spontaneous radiative decay rates are calculated for Ar XII. The configurations used are 2s(exp 2)2p(exp 3), 2s2p(exp4), 2p(exp 5), 2s22p23s, 2s(exp 2)2p(exp 2)3p, and 2s(exp 2)2p(exp 2)3d giving rise to 72 fine-structure levels in intermediate coupling. Collision strengths are calculated at five incident energies: 35,70, 105, 140 and 175 Ry. They are complemented by Coulomb-Born limits towards infinite collision energy for forbidden transitions and line strengths for optically allowed transitions. Excitation rate coefficients are calculated as a function of electron temperature by assuming a Maxwellian electron velocity distribution. Using the excitation rate coefficients and the radiative transition rates, statistical equilibrium equations for level populations are solved at electron densities covering the range of 10(exp 8)-101(exp 14) cm(exp -3) at an electron temperature of log T(sub e)/K = 6.4, corresponding to maximum abundance of Ar XII. Relative spectral line intensities are calculated.

Eissner, W.↗

Atomic Data and Spectral Line Intensities for Ar XII

Electron impact collision strengths, energy levels, oscillator strengths and spontaneous radiative decay rates are calculated for Ar XII. The configurations used are 2s(sup 2)p(sup 3), 2s(sup 2)p(sup 4), 2p(sup 5), 2s(sup 2)2p(sup 2)3s, 2s(sup 2)2p(sup 2)3p, and 2s(sup 2)2p(sup 2)3d giving rise to 72 fine-structure levels in intermediate coupling. Collision strengths are calculated at five incident energies: 35, 70, 105, 140 and 175 Ry. They are complemented by Coulomb-Born limits towards infinite collision energy for forbidden transitions and line strengths for optically allowed transitions. Excitation rate coefficients are calculated as a function of electron temperature by assuming a Maxwellian electron velocity distribution. Using the excitation rate coefficients and the radiative transition rates, statistical equilibrium equations for level populations are solved at electron densities covering the range of 10(exp 8)-10(exp 14)/cm(exp 3) at an electron temperature of log T(sub e)/K = 6.4, corresponding to maximum abundance of AR-XII. Relative spectral line intensities are calculated.

Eissner, W.↗

DEM Measurements of Moving UV Features in Prominences

Multi-thermal features with speeds of 5-70 km/s perpendicular to the line of sight are common in the prominences which showed traceable motions. These speeds are noticeably higher than the typical speeds of 5-20 km/s observed in H-alpha data from "quiet" prominences and are more typical of "activated" prominences in which H-alpha blob speeds of up to 40 km/s have been reported. In order to make a more quantitative determination of the thermal properties of the moving features seen in the UV, we use the SOHO Cororial Diagnostic Spectrometer to take a time series of exposures from a single pointing position, providing a measurement of spectral line properties as a function of time and position along the slit. The resulting observations in lines of O III, O IV, O V, Ne IV, Ne V, Ne VI, and Ne VII allow us to calculate the differential emission measure of moving features and provide a test of models of flows in prominences.

Oegerle, William↗

Solar Flare Abundances of Potassium, Argon, and Sulphur

The absolute coronal abundances of potassium has been determined for the first time from X-ray solar flare line and continuous spectra together with absolute and relative abundances of Ar and S. Potassium is of importance in the continuing debate concerning the nature of the coronal/photospheric element abundance ratios which are widely considered to depend on first ionization potential since it has the lowest FIP of any common element in the Sun. The measurements were obtained with the RESIK crystal spectrometer on the Coronas-F spacecraft. A differential emission measure DEM = const. x exp (-(beta)T(sub e) was found to be the most consistent with the data out of three models considered. We find that the coronal ratio [K/H] = 3.7 x 10(exp - 7), a factor 3 times photospheric, in agreement with other observations using line-to-line ratios. Our measured value for the coronal ratio [Ar/H] = 1.5 x 10(exp -6) is significantly less than photospheric, indicating that there is a slight depletion of this high-FIP element in the corona. For S (an intermediate-FIP element) we obtained [S/H] = 2.2 x 10(exp - 5), approximately the same as in previous work.

Oegerle, William↗

Atomic Data and Emission Line Intensities for CA VII

In the present work we calculate energy levels, transition probabilities and electron-ion collisional excitation rates for the 3s(sup 2)3p(sup 2), 3s3p(sup 3) and 3s(sup 2)3p3d configurations of the silicon-like ion Ca VII. The total number of intermediate coupling levels considered is 27. Collision strengths are calculated at seven incident electron energies: 8, 10, 15, 20, 30,40 and 60 Ry, using the Distorted Wave approximation and a 5-configuration model. Excitation rate coefficients are calculated by assuming a Maxwellian distribution of velocities and are used to calculate level populations and line emissivities under the assumption of statistical equilibrium. Line intensity ratios are calculated and compared with observed values measured from SERTS and SOHO/CDS spectra. The diagnostic potential of Ca VII is demonstrated, with particular emphasis on the possibility to measure the Ne/Ca relative abundance through simultaneous observations of Ca VII and N VI lines. Ca VII proves to be an excellent tool for the study of the FIP effect in the solar transition region.

Landi, E.↗

Atomic Data and Spectral Line Intensities for S XI

Electron impact collision strengths, energy levels, oscillator strengths and spontaneous radiative decay rates are calculated for S XI. The configurations included are 2s(sup 2)2psup 2), 2s2p(sup 3), 2p(sup 4), 2s(sup 2)2p3l and 2s(sup 2)2p4l (I = s , p , d) giving rise to 72 fine-structure levels in intermediate coupling. Collision strengths are calculated at five incident energies, 32, 60, 90, 120, and 150 Ry. Excitation rate coefficients are calculated as a function of electron temperature by assuming a Maxwellian electron velocity distribution. Using the excitation rate coefficients and the radiative transition rates, statistical equilibrium equations for level populations are solved: The effects of resonances, proton rates, photoexcitation and cascades on level populations have been investigate. The predicted S XI line intensities are compared with EUV and UV observations of the quiet and active Sun.

Landi, E.↗