Engineering Papers⌕ Search

Engineering topics

Lan, Yu-Hsiang

Publications and source records attributed to Lan, Yu-Hsiang.

A Study of the Transition to Turbulence in a Bed of 67 Spherical Pebbles

Packed beds are commonly found in many engineering systems and have been widely studied for decades. A relatively new packed bed system is the Pebble Bed Reactor, a type of generation-IV nuclear reactor. Unlike many of the packed beds encountered in chemical and process engineering applications, Pebble Bed Reactors are larger and operate at significantly higher Reynolds numbers. As a result of these differences, there is a very limited amount of information on the detailed flow physics that exist in these complex geometries. This work seeks to contribute to a growing database of flow data for Pebble Bed Reactor systems by performing Direct Numerical Simulations of the flow in an experimental bed of 67 pebbles for a range of conditions. Simulations are performed at a Prandtl number of 0.66 and Reynolds numbers from 300–600. These Reynolds numbers are chosen to gain additional knowledge on the spatial development of turbulence in these systems. Analysis of the Turbulent Kinetic Energy, turbulence anisotropy, and Turbulent Heat Flux is performed. Results demonstrate significant development of the TKE across the tested range of Reynolds numbers. Examination of both the TKE and THF reveal that development first occurs near the center of the bed and propagates radially as the flow moves further into the bed. Notable regions of negative production of turbulent kinetic energy are observed in regions where flow accelerates around pebble contact points. Furthermore, these regions are found to coincide with regions of 1-component turbulence.Kindly check and confirm, all authors email id is correctly identified.These are correct

Direct numberical simulation↗

MOSCATO Development and Integration in Fiscal Year 2024

MOSCATO (Molten Salt Chemistry and Transport) is a multiphysics code that provides high-fidelity, coupled simulations of fluid flow, heat transfer, mass transfer, chemistry, electrochemical phenomena, and alloy evolution for molten salt equipment. In FY24, significant developments were made to the code package, enhancing its capabilities in many aspects. The improvements and advancements can be summarized as follows: 1. Implementation of tritium transport capabilities and validation with experimental data: To enable modeling of tritium and other fission gases within MSRs, we implemented gas transport within MOSCATO via inclusion of couple mass transport equations within the salt and structural alloys. Comparisons to experimental data from literature showed good agreement with respect to tritium release rates. 2. Preliminary implementation of two-phase flow models in MOSCATO: To model tritium and other gases above their solubility limits, we implemented preliminary two-phase flow models within MOSCATO to account for bubble transport. The first model adopted was the Level-Set approach, which can handle the high void fraction regime, but with a requirement for high mesh resolution thus high computational expense. In this report, we present a verification of the Level-Set method using a simple benchmark case. We also performed a demonstration of the code as applied to an experimental case involving cover gas flow through salt in an experimental vessel. The second model adopted was the Eulerian-Eulerian dispersed flow model, which is computationally cheaper but limited to low void fraction regimes, such as bubbly flow. Validation and verification have not yet been performed for the Eulerian-Eulerian approach, but a preliminary implementation was completed. 3. Validation with static corrosion experiments: Static corrosion experimental data for stainless steel coupons within molten salts was used to further validate the corrosion model in MOSCATO. To do so, we leveraged the existing models in MOSCATO and simulated the sample mass loss and mass gain phenomena. Several ion species, including Cr 2+ , Fe 2+ and H + , were simulated in salt using the PNP solver, while Cr 0 and Fe 0 were simulated with a diffusion solver in stainless steel. The mass loss of the samples was compared with experimental data, and good agreement was achieved. These combined activities served to further expand the capabilities of MOSCATO and make it more generally applicable to the full range of phenomena that can control chemistry and corrosion in molten salt reactors.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Accelerating transients with NekRS: GPU overlapping domain implementation and multi-rate timestepping

The simulation of nuclear transients using Computational Fluid Dynamics (CFD) presents significant computational challenges due to the inherent complexity and the wide separation in temporal scales between various flow physical phenomena. These disparities lead to high computational costs, often making the simulation of transients impractical without advanced techniques. Consequently, multiple research initiatives are being pursued by the NEAMS thermal-hydraulic area, some driven by academic institutions and some by national laboratories. Overall, they are exploring novel methods to make transient simulations more feasible and efficient. This report delves into recent advancements within the CFD code NekRS, specifically those achieved in Fiscal Year 2024 under the CONNECT effort, aimed at improving the performance and feasibility of transient simulations. The first major advancement involves the porting of NekRS to Aurora, one of the Department of Energy’s (DOE) most powerful supercomputers. Additionally, the report discusses the implementation of an overlapping domain capability within NekRS. This novel GPU-accelerated capability allows different spatial regions of the domain to be solved independently, enhancing the code’s efficiency, particularly when running large-scale simulations in complex domains. The scalability of this approach is demonstrated, highlighting its potential to transform how transients are approached in CFD simulations. Lastly, the report focuses on how this overlapping domain capability specifically accelerates transient simulations through multi-rate timestepping. By decoupling different regions and facilitating faster computations, this method offers a promising pathway to making nuclear transient simulations more computationally feasible, addressing one of the critical bottlenecks in the field. Together, these advancements represent a significant leap forward in transient simulation technology, bringing closer the possibility of handling highly complex nuclear scenarios with greater efficiency and accuracy.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

NekRS, a GPU-accelerated spectral element Navier–Stokes solver

The development of NekRS, a GPU-oriented thermal-fluids simulation code based on the spectral element method (SEM) is described. For performance portability, the code is based on the open concurrent compute abstraction and leverages scalable developments in the SEM code Nek5000 and in libParanumal, which is a library of high-performance kernels for high-order discretizations and PDE-based miniapps. Critical performance sections of the Navier–Stokes time advancement are addressed. Performance results on several platforms are presented here, including scaling to 27,648 V100s on OLCF Summit, for calculations of up to 60B gridpoints.

97 MATHEMATICS AND COMPUTING↗

Nek5000/RS Performance on Advanced GPU Architectures

We demonstrate NekRS performance results on various advanced GPU architectures. NekRS is a GPU-accelerated version of Nek5000 that is targeting high performance on forthcoming exascale platforms. It is being developed in DOE’s Center of Efficient Exascale Discretizations (CEED), which is one of the co-design centers under the Exascale Computing Project (ECP). In this report, we consider Frontier, Crusher, Spock, Polaris, Perlmutter, ThetaGPU and Summit. Simulations are performed using ExaSMR’s 17x17 rod-bundle geometries with different problem sizes. The report focuses on strong scaling performance and analysis. Many of the results shown in this report are the outcome from participation in the ALCF GPU Hackathon on Polaris, which was held on 7/19/22, and 7/26–7/28/22. Members of the Nek5000/RS team included Misun Min, Yu-Hsiang Lan, Paul Fischer and Thilina Rathnayake. Mentors were Kris Rowe (ALCF) and Peng Wang (NVIDIA). Also presented in this report are results on Frontier, which were obtained in collaboration with John Holmen at OLCF.

97 MATHEMATICS AND COMPUTING↗

Pressure Drop Correlation Improvement for the Near-Wall Region of Pebble-Bed Reactors

Packed beds play an important role in several engineering fields, with their applications in nuclear energy being driven by the development of next-generation reactors utilizing pebble fuel. The random nature of a packed pebble bed creates a flow field that is complex and difficult to predict. Porous media models are an attractive option for modeling pebble-bed reactors (PBRs), as they provide intermediate fidelity results and are computationally efficient. Porous media models, however, rely on the use of correlations to estimate the effect of complicated flow features on the pressure drop and heat transfer in the system. Existing correlations were developed to predict the average behavior of the bed, but they are inaccurate in the near-wall region where the presence of the wall affects the pebble packing. This work aims to investigate the accuracy of a porous media model using the Kerntechnischer Ausschuss (KTA) correlation, the most common pressure drop correlation for PBRs compared to the high-fidelity large eddy simulation (LES). A bed of 1568 pebbles is investigated at Reynolds numbers from 625 to 10 000. The bed is divided into five concentric subdomains to compare the average velocity, friction losses, and form losses between the porous media and LES codes. The comparison between the LES simulation and the KTA correlation revealed that the KTA correlation largely underpredicts the form losses in the near-wall region, leading to an overprediction of the velocity near the wall by nearly 30%. An investigation of the form losses across the range of Reynolds numbers in the LES results provided additional insight into how the KTA correlation may be improved to better predict these spatial effects in a pebble bed. These data suggest that the form coefficient near the wall must be increased by 48% while decreasing the form coefficient of the inner bulk region of the bed by 15%. The implementation of these improvements to the KTA correlation in a porous media model produced a radial velocity profile that saw significantly improved agreement with the LES results.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Port and optimize the CEED software stack to Aurora/Frontier EA (ECP Milestone Report)

The goal of this milestone was to port the CEED software stack, including Nek, MFEM and libCEED to the Frontier and Aurora early access hardware, work on optimizing the performance on AMD and Intel GPUs, and demonstrate impact in CEED-enabled ECP applications. As part of this milestone, we also performed a number of other activities, including continued optimizations for CEED applications at scale on Summit, performance evaluation on non-ECP hardware, including the Fugaku’s A64FX chip and the NVIDIA A100 GPU architecture, exploring the use of just-in-time compilations in applications at scale and potential of mixed precision optimizations in the CEED discretization and solver algorithms, and more. During the milestone period, the CEED team released new versions of 6 of its packages, including major releases of MFEM, NekRS and OCCA. We also organized the fifth CEED Annual meeting (CEED5AM) which included nearly 100 researchers from national labs, universities and industry.

97 MATHEMATICS AND COMPUTING↗

GPU algorithms for Efficient Exascale Discretizations

In this paper we describe the research and development activities in the Center for Efficient Exascale Discretization within the US Exascale Computing Project, targeting state-of-the-art high-order finite-element algorithms for high-order applications on GPU-accelerated platforms. Furthermore, we discuss the GPU developments in several components of the CEED software stack, including the libCEED, MAGMA, MFEM, libParanumal, and Nek projects. We report performance and capability improvements in several CEED-enabled applications on both NVIDIA and AMD GPU systems.

97 MATHEMATICS AND COMPUTING↗

Efficient exascale discretizations: High-order finite element methods

Efficient exploitation of exascale architectures requires rethinking of the numerical algorithms used in many large-scale applications. These architectures favor algorithms that expose ultra fine-grain parallelism and maximize the ratio of floating point operations to energy intensive data movement. One of the few viable approaches to achieve high efficiency in the area of PDE discretizations on unstructured grids is to use matrix-free/partially assembled high-order finite element methods, since these methods can increase the accuracy and/or lower the computational time due to reduced data motion. In this paper we provide an overview of the research and development activities in the Center for Efficient Exascale Discretizations (CEED), a co-design center in the Exascale Computing Project that is focused on the development of next-generation discretization software and algorithms to enable a wide range of finite element applications to run efficiently on future hardware. CEED is a research partnership involving more than 30 computational scientists from two US national labs and five universities, including members of the Nek5000, MFEM, MAGMA and PETSc projects. We discuss the CEED co-design activities based on targeted benchmarks, miniapps and discretization libraries and our work on performance optimizations for large-scale GPU architectures. We also provide a broad overview of research and development activities in areas such as unstructured adaptive mesh refinement algorithms, matrix-free linear solvers, high-order data visualization, and list examples of collaborations with several ECP and external applications.

97 MATHEMATICS AND COMPUTING↗

Feasibility of full-core pin resolved CFD simulations of small modular reactor with momentum sources

Complex flow structure interactions and heat transfer processes take place in nuclear reactor cores. Given the extreme pressure/temperature and radioactive conditions inside the core, numerical simulations offer an attractive and sometimes more feasible approach to study the related flow and heat transfer phenomena in addition to the experiments. Under the Exascale Computing Project, the full-core simulation of a small modular reactor (SMR) has been pursued coupling Computational Fluid Dynamics (CFD) and neutronics. A key aspect of the modeling of SMR fuel assemblies is the presence of spacer grids and the mixing promoted by mixing vanes or the equivalent. A reduced order methodology is adopted based on momentum sources to mimic the mixing of the vanes. The momentum sources have been carefully calibrated with detailed Large Eddy Simulations (LES) of spacer grids performed with Nek5000. Modeling the spacer grid and mixing vanes (SGMV) effect without body-fitted computational grid avoids the excessive costs in resolving the local geometric details, and thus supports the simulation to be scaled up to the full core. Besides the progress on momentum source modeling, this paper also features the first full-core pin resolved CFD simulation ever performed to the authors' knowledge. This represents a significant advancement in capability for the CFD of nuclear reactors, which will hopefully serve as an inspiration for further integrating high-fidelity numerical simulations in actual engineering designs.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

High-order algorithmic developments and optimizations for large-scale GPU-accelerated simulations (Milestone CEED-MS36)

The goal of this milestone was to improve the high-order software ecosystem for CEED-enabled ECP applications by making progress on efficient matrix-free kernels targeting forthcoming ECP architectures. These kernels included matrix-free preconditioning and the development of new set of CEED solver bake-off problems. As part of this milestone, we also released the next version of the CEED software stack, CEED-4.0, reported on results from several application collaborations, and documented the efforts of porting to AMD GPUs for Frontier and other modern architectures, such as Fugaku. The specific tasks addressed in this milestone were: (1) Port and run CEED benchmarks/miniapps on Frontier EA systems; (2) Demonstrate performant libCEED integration in MFEM, Nek and applications; (3) Matrix-free preconditioning of high-order operators; (4) Benchmark problems for fast high-order solvers on GPU platforms; and (5) Public release of CEED-4.0. The artifacts delivered include the next version of the CEED software stack, CEED-4.0, the next libCEED release, libCEED-0.8, and a number of developments integrated within applications to improve their GPU and CPU performance and capabilities. See the CEED website, https://ceed.exascaleproject.org and the CEED GitHub organization, https://github.com/ceed for more details.

97 MATHEMATICS AND COMPUTING↗

Cardinal: A Lower-Length-Scale Multiphysics Simulator for Pebble-Bed Reactors

This paper demonstrates a multiphysics solver for pebble-bed reactors, in particular, for Berkeley’s pebble-bed -fluoride-salt-cooled high-temperature reactor (PB-FHR) (Mark I design). The FHR is a class of advanced nuclear reactors that combines the robust coated particle fuel form from high-temperature gas-cooled reactors, the direct reactor auxiliary cooling system passive decay removal of liquid-metal fast reactors, and the transparent, high-volumetric heat capacitance liquid-fluoride salt working fluids (e.g., FLiBe) from molten salt reactors. This fuel and coolant combination enables FHRs to operate in a high-temperature, low-pressure design space that has beneficial safety and economic implications. The PB-FHR relies on a pebble-bed approach, and pebble-bed reactors are, in a sense, the poster child for multiscale analysis. Relying heavily on the MultiApp capability of the Multiphysics Object-Oriented Simulation Environment (MOOSE), we have developed Cardinal, a new platform for lower-length-scale simulation of pebble-bed cores. The lower-length-scale simulator comprises three physics: neutronics (OpenMC), thermal fluids (Nek5000/NekRS), and fuel performance (BISON). Cardinal tightly couples all three physics and leverages advances in MOOSE, such as the MultiApp system and the concept of MOOSE-wrapped applications. Moreover, Cardinal can utilize graphics processing units for accelerating solutions. In this paper, we discuss the development of Cardinal and the verification and validation and demonstration simulations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Initial full core SMR simulations with NekRS

This document describes the completion of a recent milestone of the ExaSMR program concerning "Full core simulations". The ExaSMR project is developing tools for coupling Monte Carlo (MC) radiation transport solvers to a computational fluid dynamics (CFD) solver. Work is based on the Shift MC, OpenMC MC, and Nek5000/NekRS CFD codes. As part of this milestone, a novel set of pin-resolved CFD full-core simulations have been performed for the first time. These simulations represent a significant increase in capability in what is now possible with CFD on pre-Exascale systems. The simulations have been performed with the spectral element solvers NekRS on the supercomputer Summit. Multiple simulations campaigns have been conducted: (1) LES simulations in bare bundle, (2) RANS simulations in bare bundles, (3) RANS simulations with momentum sources and (4) Conjugate heat transfer calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nek5000 developments in support of industry and the NRC

This year, the Nuclear Energy Advanced Modeling Simulation program (NEAMS) thermal-hydraulics verification and validation (V&V) work has focused in three areas of Nek5000 V&V-driven development. First, in a close collaborative effort with the U. S. Nuclear Regulatory Commission (NRC) staff, we have continued V&V efforts for the HYMERES-2 project using the OECD/NEA sponsored testing in the PSI PANDA facility. This year’s focus of ANL-NRC collaboration involves Nek5000 setups and validation for a range of problems relevant to and including the HYMERES-2 benchmark from PSI. The primary outcome of this year efforts is a more efficient geometry and inlet modeling simplification after a careful sensitivity study of the inlet profiles and pipe geometries. The resulting modeling choice of a short recycling/fully-developed turbulent inlet is within the experimental uncertainty estimate. This finding simplifies the next step of the cross-V&V HYMERES-2 project. In addition, the ANL team continue to provide assistance to the NRC staff in the form of Nek5000 application support in general and on the use of the HPC platforms of ALCF and INL in particular. This supports the NRC’s assessment of Nek5000 for use with the NRC Blue CRAB code suite. Second, we have implemented and tested more robust model of URANS, namely the k – τ model, a variant of the k-ω model, along with other improvements to RANS Nek5000 modeling in general. Because of its demonstrated robustness and stability, the k – τ model is the only RANS model that has been implemented in the new GPU version of the Nek5000 code, nekRS. Lastly, we report the initial implementation of Jacobian-free Newton Krylov approach to the direct Newton method for steady fluid solvers aimed at acceleration of RANS modeling and at IC improvement for LES campaigns. Also leveraging the Exascale Computing Project (ECP) ANL/CEED & SMR team’s software development effort to support NEAMS problems at large scale of the advanced computing architectures, NekRS, a GPU variant of Nek5000, built on top of kernels from libParanumal using OCCA for portability, has been successfully run on the full system of Summit (4608 nodes, 27648 GPUs).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Support CEED-enabled ECP applications in their preparation for Aurora/Frontier

The goal of this milestone was to help CEED-enabled ECP applications (particularly ExaSMR, MARBL, ExaAM, ExaWind and E3SM) in their preparations for the Aurora and Frontier architectures. This work included collaboration with ECP vendors and porting and optimization of CEED’s benchmarks and miniapps to early access hardware. As part of this milestone, we also made the best bake-off problems and bake-off kernel implementation from Nek, MFEM, libParanumal and the external community available in the latest libCEED release, libCEED-0.7. During the milestone period we also organized, in virtual form, the fourth CEED Annual meeting (CEED4AM) which included representatives from ECP applications, vendors and software technology projects. The specific tasks addressed in this milestone were to: (1) Work with vendors to port and run CEED benchmarks on early access systems for Aurora and Frontier; (2) Make the best BP/BK implementations from Nek, MFEM, libParanumal and external community available in libCEED; (3) Organize the next CEED Annual meeting (CEED4AM); and (4) Optimize CEED applications and miniapps for Aurora and Frontier architectures. The artifacts delivered include the next libCEED release, libCEED-0.7, and a number of developments integrated within applications to improve their GPU performance and capabilities. See the CEED website, http://ceed.exascaleproject.org and the CEED GitHub organization, http://github.com/ceed for more details.

97 MATHEMATICS AND COMPUTING↗

An Update on Cardinal: Toward Full Core Pebble Simulations

The new DOE-NE Center of Excellence for Thermal-fluids applications in Nuclear Energy inaugurated in April 2018 considers and researches novel new solution strategies for historically challenging flow issues that still plague the current fleet of deployed Light Water nuclear Reactors (LWRs) as well as predicting various fluid flow and fluid related issues with advanced reactor technologies. Our advanced thermal-fluids research and development approach synergistically combines three natural, though overlapping, length and time scales in a hierarchal multi-scale approach to avoid the temptation and pitfalls of attempting to develop a single solve-all algorithm for physical fluid flow problems that will span nine orders of magnitude in spatial and temporal scales. To demonstrate the multi-scale philosophy of the center we focus on Fluoride Cooled High Temperature Reactors (FHRs), and in particular on the Berkley’s PB-FHR Mark-I design. The Fluoride salt cooled High temperature Reactor (FHR) is a class of advanced nuclear reactors that combine the robust coated particle fuel form from high temperature gas cooled reactors, direct reactor auxiliary cooling system (DRACS) passive decay removal of liquid metal fast reactors, and the transparent, high volumetric heat capacitance liquid Fluoride salt working fluids - such as Flibe - from molten salt reactors. This combination of fuel and coolant enables FHRs to operate in a high-temperature low-pressure design space that has beneficial safety and economic implications. The PB-FHR reactor relies on a pebble bed approach and pebble bed reactors are in a sense the poster child for multi-scale analysis. The lower length-scale simulator for pebble reactor cores comprises three physics: neutronics (OpenMC), thermal-fluids (Nek5000/NekRS) and fuel performance (BISON). As part of Center of Excellence ongoing research efforts we have developed Cardinal, a new tool platform for lower length-scale simulation. Cardinal tightly couples all three physics and leverages advances in MOOSE such as the MultiApp system and the concept of MOOSE-wrapped Apps. The present report provides an update on the development of Cardinal with an extension of Cardinal to GPUs. We also perform a first-of-a-kind demonstration simulation on Summit representing a 10x capability increase in terms of pebble count for Cardinal.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

On the use of LES-based turbulent thermal-stress models for rod bundle simulations

An alternative methodology is proposed here to overcome the excessive cost of large eddy simulations (LES) of full-length heated rod bundle calculations, while improving the inaccurate results typically obtained with Reynolds-averaged Navier-Stokes equations (RANS). While the cost of the full-length LES is generally too high, LES of a small section of a single rod is usually affordable. The idea presented here consists of using the information granted by the small LES calculation to determine the appropriate turbulence viscosity or turbulent thermal diffusivity that can be used to solve only for the temperature field in a pseudo-RANS approach. The study has been performed with single-rod simulations with a P/D of 1.12 and 1.24, considering rod lengths that are representative of reactor applications, for the cases of uniform heat flux and a more realistic cosine-like axial heat distribution. Here, the spectral element code Nek5000 has been used for all LES, RANS, and pseudo-RANS simulations. The recently proposed Nek5000 steady-state solver has been used for solving the temperature field in the pseudo-RANS approach and has proved significantly faster than transient schemes. Prediction of thermal quantities is compared with classical linear and nonlinear RANS models. LES for the full-length rods has also been performed and is used as a reference. Results of the proposed method show significant improvements with respect to those obtained with RANS.

42 ENGINEERING↗

Engage second wave ECP/CEED applications

The CEED co-design center aims to impact a wide range of ECP application teams through focused 1-to-1 and 1-to many interactions, facilitated by CEED application liaisons, ultimately targeted to provide easy-to-use discretization libraries for high-order FEM-based application simulations. The goal of this milestone was to extend our reach by identifying a second wave of ECP applications that can benefit from the efficient discretization algorithms and software developed in CEED. These applications were added to the list of the CEED first wave ECP applications (ExaSMR and MARBL), which continue to be main targets for our work. As part of the milestone, we also appointed liaisons on the CEED team that will be responsible for engaging each application, identifying its challenging discretization needs, and outlining a plan for interaction with CEED. Working with all CEED thrusts, the liaisons will be ultimately responsible for ensuring the adoption of CEED technologies in each application as well as for demonstrating their benefits. The selected second wave applications and CEED liaisons are: Urban - liaison Aleks Obabko (ANL), ExaWind - liaison Paul Fischer (UIUC), and ExaAM - liaison Tzanio Kolev (LLNL). In addition to details and results from these efforts, in this document we report on other project-wide activities performed in Q1 of FY19, including: engagements with performing scaling on V100 GPUs, collaboration with ECP/MPICH, participation in ECP/ST’s E4S release, the Laghos-2.0 release, papers, presentations, and other outreach efforts.

97 MATHEMATICS AND COMPUTING↗