Engineering topics

Lambe, J.

Publications and source records attributed to Lambe, J..

7 records

NASA NTRS1986

Room temperature deposition of superconducting NbN for superconductor-insulator-superconductor junctions

The deposition of stoichiometric B1-crystal-structure (111) NbN films on glass or sapphire substrates by reactive dc magnetron sputtering is reported. High-purity Ar-N2 mixtures are used in the apparatus described by Thakoor et al. (1985), and typical deposition parameters are given as background pressure about 10 ntorr, voltage -325 V, current 1 A, deposition rate 1.35 nm/s, film thickness 500 nm, P(Ar) 5-17 mtorr, initial P(N2) 2-6 mtorr, and room temperature. The N2 consumption-injection characteristics are studied and found to control NbN formation using well-conditioned Nb targets. Films with transition temperatures 15-16 K are obtained at P(Ar) = 12.9 + or - 0.2 mtorr and P(N2) = 3.7 + or - 0.1 mtorr. SIS junctions of area about 0.001 sq cm fabricated using the NbN films are shown to have I-V characteristics with nonlinearity parameter about 110 and NbN superconducting-gap parameter Delta = about 2.8 meV.

Thakoor, S.↗

NASA NTRS1985

Thin-film chemical sensors based on electron tunneling

The physical mechanisms underlying a novel chemical sensor based on electron tunneling in metal-insulator-metal (MIM) tunnel junctions were studied. Chemical sensors based on electron tunneling were shown to be sensitive to a variety of substances that include iodine, mercury, bismuth, ethylenedibromide, and ethylenedichloride. A sensitivity of 13 parts per billion of iodine dissolved in hexane was demonstrated. The physical mechanisms involved in the chemical sensitivity of these devices were determined to be the chemical alteration of the surface electronic structure of the top metal electrode in the MIM structure. In addition, electroreflectance spectroscopy (ERS) was studied as a complementary surface-sensitive technique. ERS was shown to be sensitive to both iodine and mercury. Electrolyte electroreflectance and solid-state MIM electroreflectance revealed qualitatively the same chemical response. A modified thin-film structure was also studied in which a chemically active layer was introduced at the top Metal-Insulator interface of the MIM devices. Cobalt phthalocyanine was used for the chemically active layer in this study. Devices modified in this way were shown to be sensitive to iodine and nitrogen dioxide. The chemical sensitivity of the modified structure was due to conductance changes in the active layer.

Khanna, S. K.↗

NASA NTRS1985

Study of Contact Resistances in Integrated Circuits

Techniques explored in search for rapid, reliable test. Resistances of aluminum/silicon contacts and methods to measure subjects of NASA report. Study with three tasks undertaken to evaluate nature and reliability of large numbers of semiconductor contacts of type now being fabricated in integrated circuits: Develop yield analysis for series strings of contacts using wafer-level electrical measurements, and identify different types of faults by visual inspection; develop wafer-level tests to evaluate reliability of contact strings; and develop mathematical model for current flow in contacts and examine contact region for evidence of micro-alloying.

Buehler, M. G.↗

NASA NTRS1985

Observation of adsorbate-induced surface states by elastic electron tunneling spectroscopy

Electronic structure induced by adsorbates at the interface of Al/AlOx/Au tunnel junctions has been observed by elastic electron tunneling spectroscopy. Strong structures appearing in the tunneling spectra above approximately 1 eV after exposure to I, Hg, Bi, and organohalides, have been interpreted in terms of adsorbate-induced surface states. The spectroscopic capabilities of elastic electron tunneling spectroscopy may be useful in the area of chemical detection. In the broader sense, the observation of adsorbate-induced unoccupied electronic states below the vacuum energy, makes elastic electron tunneling spectroscopy a potentially useful technique for the study of surfaces.

Leduc, H. G.↗

NASA NTRS1985

Electronic device aspects of neural network memories

The basic issues related to the electronic implementation of the neural network model (NNM) for content addressable memories are examined. A brief introduction to the principles of the NNM is followed by an analysis of the information storage of the neural network in the form of a binary connection matrix and the recall capability of such matrix memories based on a hardware simulation study. In addition, materials and device architecture issues involved in the future realization of such networks in VLSI-compatible ultrahigh-density memories are considered. A possible space application of such devices would be in the area of large-scale information storage without mechanical devices.

Lambe, J.↗

NASA NTRS1984

Observation of surface states on gold films by electron tunneling spectroscopy

It is pointed out that inelastic electron tunneling spectroscopy (IETS) is a useful technique for the study of vibrational modes of molecules adsorbed on the surface of the insulating layer in a metal-insulator-metal tunnel junction. A detailed study of electron tunneling in aluminum-aluminum oxide-gold (Al-Al2O3-Au) tunnel junctions has been conducted with an overall goal of exploring possible mechanisms in such a thin film device useful for chemical sensing. For an understanding of the electronic effects in the presence of chemicals in a junction, the electronic surface properties of the metallic films in a clean tunnel junction must be established. The present investigation is concerned with room temperature observations of electronic states on the surface of highly oriented gold film in Al-Al2O3-Au junctions.

Lambe, J.↗

NASA NTRS1983

Inelastic electron tunneling spectroscopy

Inelastic electron tunneling spectroscopy is a useful technique for the study of vibrational modes of molecules adsorbed on the surface of oxide layers in a metal-insulator-metal tunnel junction. The technique involves studying the effects of adsorbed molecules on the tunneling spectrum of such junctions. The data give useful information about the structure, bonding, and orientation of adsorbed molecules. One of the major advantages of inelastic electron tunneling spectroscopy is its sensitivity. It is capable of detecting on the order of 10 to the 10th molecules (a fraction of a monolayer) on a 1 sq mm junction. It has been successfully used in studies of catalysis, biology, trace impurity detection, and electronic excitations. Because of its high sensitivity, this technique shows great promise in the area of solid-state electronic chemical sensing.

Khanna, S. K.↗