Engineering topics

Lamarsh, William J., II

Publications and source records attributed to Lamarsh, William J., II.

8 records

NASA NTRS1995

Reducing neural network training time with parallel processing

Obtaining optimal solutions for engineering design problems is often expensive because the process typically requires numerous iterations involving analysis and optimization programs. Previous research has shown that a near optimum solution can be obtained in less time by simulating a slow, expensive analysis with a fast, inexpensive neural network. A new approach has been developed to further reduce this time. This approach decomposes a large neural network into many smaller neural networks that can be trained in parallel. Guidelines are developed to avoid some of the pitfalls when training smaller neural networks in parallel. These guidelines allow the engineer: to determine the number of nodes on the hidden layer of the smaller neural networks; to choose the initial training weights; and to select a network configuration that will capture the interactions among the smaller neural networks. This paper presents results describing how these guidelines are developed.

Rogers, James L., Jr.↗

NASA NTRS1994

Program Aids Analysis And Optimization Of Design

NETS/ PROSSS (NETS Coupled With Programming System for Structural Synthesis) computer program developed to provide system for combining NETS (MSC-21588), neural-network application program and CONMIN (Constrained Function Minimization, ARC-10836), optimization program. Enables user to reach nearly optimal design. Design then used as starting point in normal optimization process, possibly enabling user to converge to optimal solution in significantly fewer iterations. NEWT/PROSSS written in C language and FORTRAN 77.

Rogers, James L., Jr.↗

NASA NTRS1993

Application of a neural network as a potential aid in predicting NTF pump failure

The National Transonic Facility has three centrifugal multi-stage pumps to supply liquid nitrogen to the wind tunnel. Pump reliability is critical to facility operation and test capability. A highly desirable goal is to be able to detect a pump rotating component problem as early as possible during normal operation and avoid serious damage to other pump components. If a problem is detected before serious damage occurs, the repair cost and downtime could be reduced significantly. A neural network-based tool was developed for monitoring pump performance and aiding in predicting pump failure. Once trained, neural networks can rapidly process many combinations of input values other than those used for training to approximate previously unknown output values. This neural network was applied to establish relationships among the critical frequencies and aid in predicting failures. Training pairs were developed from frequency scans from typical tunnel operations. After training, various combinations of critical pump frequencies were propagated through the neural network. The approximated output was used to create a contour plot depicting the relationships of the input frequencies to the output pump frequency.

Rogers, James L.↗

NASA NTRS1992

Aerodynamic performance optimization of a rotor blade using a neural network as the analysis

This paper describes the use of neural networks as a replacement for rotor analyses in a conventional aerodynamic performance optimization procedure. The optimization procedure minimizes an objective function, a linear combination of horsepower required for hover, forward flight, and maneuver. The design variables are pretwist, taper initiation, taper ratio, and blade root chord. Constraints consist of limits on horsepower required (for hover, forward flight, and maneuver), stall, trim, and minimum tip chord. Neural network analyses agree with conventional analyses.

Lamarsh, William J., II↗

NASA NTRS1992

Application of a neural network to simulate analysis in an optimization process

A new experimental software package called NETS/PROSSS aimed at reducing the computing time required to solve a complex design problem is described. The software combines a neural network for simulating the analysis program with an optimization program. The neural network is applied to approximate results of a finite element analysis program to quickly obtain a near-optimal solution. Results of the NETS/PROSSS optimization process can also be used as an initial design in a normal optimization process and make it possible to converge to an optimum solution with significantly fewer iterations.

Rogers, James L.↗

NASA NTRS1992

Fully integrated aerodynamic/dynamic optimization of helicopter rotor blades

A fully integrated aerodynamic/dynamic optimization procedure is described for helicopter rotor blades. The procedure combines performance and dynamic analyses with a general purpose optimizer. The procedure minimizes a linear combination of power required (in hover, forward flight, and maneuver) and vibratory hub shear. The design variables include pretwist, taper initiation, taper ratio, root chord, blade stiffnesses, tuning masses, and tuning mass locations. Aerodynamic constraints consist of limits on power required in hover, forward flight and maneuvers; airfoil section stall; drag divergence Mach number; minimum tip chord; and trim. Dynamic constraints are on frequencies, minimum autorotational inertia, and maximum blade weight. The procedure is demonstrated for two cases. In the first case, the objective function involves power required (in hover, forward flight and maneuver) and dynamics. The second case involves only hover power and dynamics. The designs from the integrated procedure are compared with designs from a sequential optimization approach in which the blade is first optimized for performance and then for dynamics. In both cases, the integrated approach is superior.

Walsh, Joanne L.↗

NASA NTRS1992

Fully integrated aerodynamic/dynamic optimization of helicopter rotor blades

This paper describes a fully integrated aerodynamic/dynamic optimization procedure for helicopter rotor blades. The procedure combines performance and dynamics analyses with a general purpose optimizer. The procedure minimizes a linear combination of power required (in hover, forward flight, and maneuver) and vibratory hub shear. The design variables include pretwist, taper initiation, taper ratio, root chord, blade stiffnesses, tuning masses, and tuning mass locations. Aerodynamic constraints consist of limits on power required in hover, forward flight and maneuver; airfoil section stall; drag divergence Mach number; minimum tip chord; and trim. Dynamic constraints are on frequencies, minimum autorotational inertia, and maximum blade weight. The procedure is demonstrated for two cases. In the first case the objective function involves power required (in hover, forward flight, and maneuver) and dynamics. The second case involves only hover power and dynamics. The designs from the integrated procedure are compared with designs from a sequential optimization approach in which the blade is first optimized for performance and then for dynamics. In both cases, the integrated approach is superior.

Walsh, Joanne L.↗

NASA NTRS1991

User's guide for NETS/PROSSS

Expensive analysis programs are often combined with optimization procedures to solve engineering problems. To obtain an optimal solution requires numerous iterations between the analysis program and the optimizer. This often becomes prohibitive due to the cost and amount of computer time needed to converge to an optimal solution. NETS/PROSSS was developed to address this problem. The purpose of this paper is to serve as a user's guide for NETS/PROSSS. The key features include the neural network, determining the training pairs for the neural network, and the approximated analysis/optimization process. A small problem is given to serve as an example of how to apply the system.

Rogers, James L.↗