Engineering Papers⌕ Search

Engineering topics

Lakshminarayana, B.

Publications and source records attributed to Lakshminarayana, B..

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Penn State axial flow turbine facility: Performance and nozzle flow field

The objective is to gain a thorough understanding of the flow field in a turbine stage including three-dimensional inviscid and viscid effects, unsteady flow field, rotor-stator interaction effects, unsteady blade pressures, shear stress, and velocity field in rotor passages. The performance of the turbine facility at the design condition is measured and compared with the design distribution. The data on the nozzle vane static pressure and wake characteristics are presented and interpreted. The wakes are found to be highly three-dimensional, with substantial radial inward velocity at most spanwise locations.

Lakshminarayana, B.↗
NASA NTRS1991

Computation of supersonic and low subsonic cascade flows using an explicit Navier-Stokes technique and the kappa-epsilon turbulence model

A fully explicit two-dimensional flow solver, based on a four-stage Runge-Kutta scheme, was developed and utilized to predict two-dimensional viscous flow through turbomachinery cascades for which experimental data is available. The formulation is applied to the density averaged Navier-Stokes equations. Several features of the technique improve the ability of the code to predict high Reynolds number flows on highly stretched grids. These include a low Reynolds number compressible form of the k-epsilon turbulence model, anisotropic scaling of artificial dissipation terms and locally varying timestep evaluation based on hyperbolic and parabolic stability considerations. Comparisons between computation and experiment are presented for both a supersonic and a low-subsonic compressor cascade. These results indicate that the code is capable of predicting steady two-dimensional viscous cascade flows over a wide range of Mach numbers in reasonable computational times.

Kunz, R. F.↗
NASA NTRS1991

A pressure based method for the solution of viscous incompressible turbomachinery flows

A new technique was developed for the solution of the incompressible Navier-Stokes equations. The numerical technique, derived from a pressure substitution method (PSM), overcomes many of the deficiencies of the pressure correction method. This technique allows for the direct solution of the actual pressure in the form of a Poisson equation which is derived from the pressure weighted substitution of the full momentum equations into the continuity equation. Two dimensional internal flows are computed with this method. The prediction of cascade performance is presented. The extention of the pressure correction method for the solution of three dimensional flows is also presented.

Hobson, Garth Victor↗
NASA NTRS1990

Computation and turbulence modeling for three-dimensional boundary layers including turbomachinery rotor flows

A method is developed for predicting the behavior of three-dimensional, turbulent boundary layers occurring in internal flows, including those on turbomachinery rotor blades. These boundary layers are complex, turbulent, and subject to Coriolis and centrifugal forces. The major thrust of this paper is the development and use of an algebraic Reynolds stress model (ARSM) that captures the changes in turbulent flow structure arising from curvature, rotation, and three dimensionality. The prediction of pressure-driven secondary flow agrees well with the measured data, and all three turbulence models (k-epsilon, algebraic eddy viscosity, and ARSM) show the same level of agreement. The prediction of boundary-layer development on rotor blades shows much better agreement with measurements with the ARSM. It is essential to employ higher-order turbulence models to capture the effects of rotation, curvature, and three dimensionality on boundary layers in turbomachinery.

Zhang, J.↗
NASA NTRS1990

Computation of turbine flowfields with a Navier-Stokes code

A new technique has been developed for the solution of the incompressible Navier-Stokes equations. The numerical technique, derived from a pressure substitution method (PSM), overcomes many of the deficiencies of the pressure crrection method. This technique allows for the direct solution of the actual pressure in the form of a Poisson equation which is derived from the pressure weighted substitution of the full momentum equations into the continuity equation. In two-dimensions a turbine flowfield, including heat transfer, has been computed with this method and the prediction of the cascade performance is presented. The extension of the pressure correction method for the solution of three-dimensional flows is also presented for laminar flow in an S-shaped duct and turbulent flow in the end-wall region of a turbine cascade.

Hobson, G. V.↗
NASA NTRS1990

Prediction of cascade performance using an incompressible Navier-Stokes technique

A fully elliptic, control volume solution of the two-dimensional incompressible Navier-Stokes equations for the prediction of cascade performance over a wide incidence range is presented. The numerical technique is based on a new pressure substitution method. A Poisson equation is derived from the pressure weighted substitution of the full momentum equations into the continuity equation. The analysis of a double circular arc compressor cascade is presented, and the results are compared with the available experimental data at various incidence angles. Good agreement is obtained for the blade pressure distribution, boundary layer and wake profiles, skin friction coefficient, losses and outlet angles. Turbulence effects are simulated by the Low-Reynolds-Number version of the k-epsilon turbulence model.

Hobson, G. V.↗
NASA NTRS1990

Fully elliptic incompressible flow calculations on regular grid by a new pressure substitution method

A new method is presented for the solution of incompressible flow in generalized coordinates. This method is based on the substitution of the pressure weighted form of the momentum equations into the continuity equation. The algorithm is rigorously derived and a Fourier analysis is used to assess its suitability to act as an error smoother. Linear stability analysis results indicate that the performance of the new pressure substitution method (PSM) and the pressure correction method (PCM) is about the same at low Reynolds numbers, with no significant pressure gradient. At high Reynolds numbers the PSM shows much faster convergence. Likewise prediction of various flows indicate that the PSM has better accuracy for high Reynolds number flows with significant pressure gradients. Since most practical aerodynamic flows have significant pressure gradients, the PSM seems to be attractive for such flows. Solutions for both laminar and turbulent flow are compared with the experimental data. A two-equation low Reynolds number turbulence model is used to resolve the turbulent flowfield.

Hobson, G. V.↗
NASA NTRS1989

A new facility to study three dimensional viscous flow and rotor-stator interaction in turbines

A description of the Axial Flow Turbine Research Facility (AFTRF) being built at the Turbomachinery Laboratory of the Pennsylvania State University is presented. The purpose of the research to be performed in this facility is to obtain a better understanding of the rotor/stator interaction, three dimensional viscous flow field in nozzle and rotor blade passages, spanwise mixing and losses in these blade rows, transport of wake through rotor passage, and unsteady aerodynamics and heat transfer of rotor blade row. The experimental results will directly feed and support the analytical and the computational tool development. This large scale low speed facility is heavily instrumented with pressure and temperature probes and has provision for flow visualization and laser Doppler anemometer measurement. The facility design permits extensive use of the high frequency response instrumentation on the stationary vanes and more importantly on the rotating blades. Furthermore it facilitates detailed nozzle wake, rotor wake, and boundary layer surveys. The large size of the rig also has the advantage of operating at Reynolds numbers representative of the engine environment.

Lakshminarayana, B.↗
NASA NTRS1989

Computation of three dimensional turbulent boundary layers in internal flows, including turbomachinery rotor blades

A method is developed for predicting three-dimensional turbulent boundary layers occurring in internal flows, including rotor blades of turbomachinery. These boundary layers are complex, turbulent, and are subject to Coriolis and centrifugal forces. The algebraic Reynolds stress model (ARSM) developed in this paper satisfies the realizability conditions exactly and captures the changes in turbulenet structure arising from curvature and rotation. The prediction of pressure driven secondary flow agrees well with the data and all the three turbulent models (k-e, algebraic eddy viscosity, and ARSM) show the same level of agreement. The prediction of boundary layer on rotor blades shows much better agreement with the ARSM. It is essential to employ the higher order models to capture the effects of rotation and curvature and three-dimensional boundary layers in turbomachinery.

Zhang, J.↗
NASA NTRS1988

A space-marching method for the computation of viscous internal flows

A space-marching method has been developed to compute 3-D viscous flows in internal geometries. The Navier-Stokes equations have been posed as an initial-value problem by neglecting the effects of streamwise diffusion and treating the streamwise pressure gradient as a known source term. The fully coupled system of equations has been solved by a noniterative algorithm at each streamwise step of the computation. A low Mach number formulation of the equations has been used to compute incompressible flow fields. A computer program has been written to implement all aspects of the space-marching algorithm. The program is modular and is easily adapted to the widely varying geometries of internal flows. The space-marching algorithm has been tested by computing simple flows with known analytical solutions. The method has been used to predict complex 3-D turbulent flows. The algorithm is stable and very economical. A single sweep of the flow field by the space-marching method is approximately equivalent to one time-step of the time-marching method.

Govindan, T. R.↗
NASA NTRS1987

Laser Doppler velocimeter measurement of annulus wall boundary layer development in a compressor rotor

Detailed measurement of the flow field in the tip region of a compressor rotor was carried out using LDV. The axial and tangential components of relative velocities were measured upstream, inside the passage, and at the exit of the rotor, up to about 20 percent of the blade span from the blade tip. The annulus-wall boundary layer is well behaved at the leading edge and far downstream of the rotor. But inside the passage, complex interactions between the leakage flow and the annulus-wall boundary layer result in unconventional profiles with wide deviations from models employed for analyses.

Lakshminarayana, B.↗
NASA NTRS1987

The hub wall boundary layer development and losses in an axial flow compressor rotor passage

The hub wall boundary layer development in a compressor stage including the rotor passage is experimentally investigated. A miniature five-hole probe was employed to measure the hub wall boundary layer inside the inlet guide vane passage, upstream and far downstream of the rotor. The hub wall boundary layer inside the rotor passage was acquired using a rotating miniature five-hole probe. The boundary layer is well behaved upstream and far downstream of the rotor. The migration of the hub wall boundary layer towards the suction surface corner is observed. The limiting streamline angles and static pressure distribution across the stage were also measured. The mean velocity profiles and the integral properties upstream, inside and downstream of the rotor, and the losses are presented and interpreted.

Murthy, K. N. S.↗
NASA NTRS1987

An experimental study on the effects of tip clearance on flow field and losses in an axial flow compressor rotor

Detailed measurement of the flow field in the tip region of a compressor rotor was carried out using a Laser Doppler Velocimeter (LDV) and a Kiel probe at two different tip clearance heights. At both clearance sizes, the relative stagnation pressure and the axial and tangential components of relative velocities were measured upstream, inside the passage and downstream of the rotor, up to about 20 percent of the blade span from the annulus wall. The velocities, outlet angles, losses, momentum thickness, and force defect thickness are compared for the two clearances. A detailed interpretation of the effect of tip clearance on the flow field is given. There are substantial differences in flow field, on momentum thickness, and performance as the clearance is varied. The losses increase linearly within the passage and their values increase in direct proportion to tip clearance height. No discernable vortex (discrete) is observed downstream of the rotor.

Lakshminarayana, B.↗
NASA NTRS1987

Verification of 3D viscous/turbulent codes for internal flows

A computational fluid dynamics code is validated using data obtained through a nonintrusive laser Doppler velocimeter. A space marching technique and a parabolic marching technique are use to calculate the flow in a compressor using compressible and incompressible flow assumptions. In a viewgraph format, both computational fluid dynamics techniques and experimental data are compared to each other.

Lakshminarayana, B.↗
NASA NTRS1986

Computation of turbulent flows on rotating bodies and ducts

A K-epsilon model for three-dimensional boundary layers modified to include anisotropy and one modified for rotating flows are described. Based on these models, the predictions of a space-marching code show good agreement with the flow data for a rotating cylinder and a rotating channel.

Pougare, M.↗