Engineering Papers⌕ Search

Engineering topics

Lacy, L. L.

Publications and source records attributed to Lacy, L. L..

27 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Observations of the liquid/solid interface in low-gravity melting

Time-lapsed photography of the liquid/solid interface of a melting ice cylinder was taken on Skylab 3 over a period of three hours. The same experiment was simulated on earth such that morphological and thermodynamic differences could be noted. A study of the returned color film clearly shows the dominance of surface tension effects in low-gravity melting. In the Skylab experiment, the ends of the ice cylinder melted first with the water being driven by surface tension onto the cylindrical surfaces. At any time, the principle of minimum surface area governs the overall appearance of the water-ice globule which changed from a cylindrical to a spherical shape. The latent heat of melting in low-gravity is supplied only by radiation (81%) and conduction (19%); whereas in one-g, the convective (55%) and radiative (38%) mode of heat transfer dominates over the conductive portion (7%). Information is also provided on containerless melting and heat transfer in space in the absence of convective air currents.

Otto, G. H.↗
NASA NTRS1974

The behavior of immiscible liquids in space

A demonstration experiment (TV102) was performed on the Skylab 4 mission to illustrate the behavior of immiscible liquids of different densities in zero-gravity. The purpose of the experiment was to determine the rate of coalescence of two well-characterized liquids, Krytox 143 AZ oil and water, after the liquids were finely dispersed by shaking. An analysis of the video-taped data and 35mm color transparencies indicates that all investigated emulsions were stable with only a small amount of observed coalescence for at least 10 hours after mixing, whereas the fluids in the ground-control case separated completely in 10 seconds. This experiment indicates that the coalescence rate was at least .000003 times smaller on Skylab than on earth.

Lacy, L. L.↗
NASA NTRS1974

The electrical properties of low-g processed immiscible alloys

When dispersed or mixed immiscibles are solidified on earth, a large amount of separation of the constituents takes place due to differences in densities. However, when the immiscibles are dispersed and solidified in zero-gravity, density separation does not occur, and unique composite solids can be formed with many new and promising electrical properties. By measuring the electrical resistivity and superconducting critical temperature of zero-g processed Ga-Bi samples, it has been found that the electrical properties of such materials are entirely different from the basic constituents and the ground control samples. The finest dispersions are obtained only in a low-gravity environment. Our results indicate that space-processed immiscible materials may form an entirely new class of electronic materials. The interesting electrical properties of directionally solidified Al-Cu eutectic, a two-component alloy consisting of Al and Al2Cu which was processed on Skylab (M566) are briefly reviewed. The electrical resistivity of directionally solidified eutectics with a lamellar structure are highly anisotropic and have been studied both experimentally and theoretically. The local resistivity of the space-processed samples are compared to a ground control sample and to the expected theoretical results.

Otto, G. H.↗
NASA NTRS1974

The electrical properties of zero-gravity processed immiscibles

When dispersed or mixed immiscibles are solidified on earth, a large amount of separation of the constituents takes place due to differences in densities. However, when the immiscibles are dispersed and solidified in zero-gravity, density separation does not occur, and unique composite solids can be formed with many new and promising electrical properties. By measuring the electrical resistivity and superconducting critical temperature, Tc, of zero-g processed Ga-Bi samples, it has been found that the electrical properties of such materials are entirely different from the basic constituents and the ground control samples. Our results indicate that space processed immiscible materials may form an entirely new class of electronic materials.

Lacy, L. L.↗
NASA NTRS1972

Measurements of ultrasonic velocities using a digital averaging technique.

A new pulse-echo technique using real-time digital averaging is described for measuring the phase velocity in solids up to 50 MHz. The technique can measure the transit time between any two echoes to an absolute accuracy of 0.1 nsec and measure small changes in transit time to a sensitivity of 20 psec. Experimental examples are given based upon ultrasonic velocity measurements in a single crystal superconductor.

Lacy, L. L.↗
NASA NTRS1972

Ultrasonic investigation of the superconducting properties of the Nb-Mo system

The superconducting properties of single crystals of Nb and two alloys of Nb with Mo were investigated by ultrasonic techniques. The results of measurements of the ultrasonic attenuation and velocities as a function of temperature, Mo composition, crystallographic direction, and ultrasonic frequency are reported. The attenuation and small velocity changes associated with the superconductivity of the samples are shown to be dependent on the sample resistivity ratio which varied from 4.3 for Nb-9% Mo to 6500 for pure Nb. The ultrasonic attenuation data are analyzed in terms of the superconducting energy gap term of the BCS theory. A new model is proposed for the analysis of ultrasonic attenuation in pure superconductors with two partially decoupled energy bands. To analyze the attenuation in pure superconducting Nb, the existence of two energy gaps was assumed to be associated with the two partially decoupled energy bands. One of the gaps was found to have the normal BCS value of 3.4 and the other gap was found to have the anomalously large value of 10. No experimental evidence was found to suggest that the second energy gap had a different transition temperature. The interpretation of the results for the Nb-Mo alloys is shown to be complicated by the possible existence of a second superconducting phase in Nb-Mo alloys with a transition temperature of 0.35 of the transition temperature of the first phase. The elastic constants of Nb and Nb-Mo alloys are shown to be approximately independent of Mo composition to nine atomic percent Mo. These results do not agree with the current microscopic theory of transition temperature for the transition elements.

Lacy, L. L.↗