Kuns, Miranda W. | Engineering Papers

DOE OSTI2023

Class-based separations of mixed solid–liquid systems with condensable solvent washing and extraction: The dilemma of pizza box recycling

As primary feedstocks deplete across the world, raw material extraction becomes increasingly expensive. Awareness of the environmental impact of primary extraction has motivated the development of energy- and reagent-efficient methods for material reuse. This work confronts an emblematic challenge of modern recycling: the soiled pizza box. While the fibers constituting corrugated cardboard are generally recyclable, pizza contaminants such as sauces and oils complicate their reuse, resulting in municipal prohibitions on the recycling of used pizza boxes in cardboard recycling streams and a representative of 275 kg/year per US household of food waste that is directed to landfill. This challenge is common to many materials, and engineering strategies must be developed to tackle complex/mixed feedstocks. To address the mixed composition of the pizza box (and similar materials), an environmentally benign, non-toxic organic solvent is applied to remove and fractionate components from mixed materials. The solvent employed in this process, dimethyl ether (DME), is a condensable hygroscopic gas, which facilitates its removal and recovery for reuse. Further, the results of this study indicate that 1) DME is capable of solubilizing and extracting components from soiled cardboard and other materials, (resulting in cardboard drier than new/unused cardboard) facilitating its recycling, and 2) the DME-soluble components of the system phase separate into aqueous and fatty acid/oil fractions (potentially ~27.5 kg/year per US household). Condensable solvent-driven washing and extraction enable the efficient separation of multiple intermediate product streams, suggesting a pathway to enable technology development necessary for achieving clean production in a circular economy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Improving knife milling performance for biomass preprocessing by using advanced blade materials

Mechanical preprocessing of biomass, including size reduction, is a crucial step in converting biomass into biofuel. However, feedstock inevitably contains abrasive intrinsic and extrinsic inorganics that may cause excessive tool wear in preprocessing. Here, this work demonstrates that performance of a knife mill can be significantly improved by applying a more wear-resistant blade material. A series of full-scale knife mill tests were performed for size reduction of forest residue using blades of tungsten carbide (WC–Co), iron-borided tool steel, and diamond-like carbon (DLC) coated tool steel. Blade material loss was quantified in correlation to the amount of feedstock processed and wear mechanisms were investigated via worn surface characterization. While the thin DLC coating was removed quickly, the WC-Co and iron-borided blades improved the tool life by 8X and 3X compared with the M2 tool steel blades (baseline), respectively. The in-situ throughput and power consumption measurements provided additional insights. The WC-Co and iron-borided blades had ~3X higher throughput than the baseline blades by the end of the test with lower normalized power consumption. The experimental results were then used as input for a techno-economic analysis, which suggested that the more wear resistant blades could cut the knife milling cost by $2–3 per ton of biomass processed with downtime reduced by 65–85%.

36 MATERIALS SCIENCE↗