Engineering Papers⌕ Search

Engineering topics

Krawczyk, Frank L.

Publications and source records attributed to Krawczyk, Frank L..

Continuous antenna arrays

A continuous antenna array includes a plurality of antenna elements whose opposing electrodes create an electric field that excites polarization currents in an enclosed dielectric. Each of the antenna elements comprises one or more stripline feeds configured to provide a flat form factor and apply a signal with controlled phase differences between the plurality of antenna elements.

Krawczyk, Frank L.↗

Information Carried by Electromagnetic Radiation Launched from Accelerated Polarization Currents

We show experimentally that a continuous, linear, dielectric antenna in which a superluminal polarization-current distribution accelerates can be used to transmit a broadband signal that is reproduced in a comprehensible form at a chosen target distance and angle. The requirement for this exact correspondence between broadcast and received signals is that each moving point in the polarization-current distribution approaches the target at the speed of light at all times during its transit along the antenna. This results in a one-to-one correspondence between the time at which each point on the moving polarization current enters the antenna and the time at which all of the radiation emitted by this particular point during its transit through the antenna arrives simultaneously at the target. This has the effect of reproducing the desired time dependence of the original broadcast signal. For other observer-detector positions, the time dependence of the signal is scrambled, due to the nontrivial relationship between emission (retarded) time and reception time. This technique represents a contrast to conventional radio transmission methods; in most examples of the latter, signals are broadcast with little or no directivity, selectivity of reception being achieved through the use of narrow frequency bands. In place of this, the current paper uses a spread of frequencies to transmit information to a particular location; the signal is weaker and has a scrambled time dependence elsewhere. Here, we point out the possible relevance of this mechanism to 5G neighborhood networks and pulsar astronomy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

SRF Resonators for a bi-directional Energy Ramping Upgrade of the Isotope Production Facility Beamline at LANL

The LANL Isotope Production Facility (IPF) is one of the two high-current proton linear accelerators operated under the auspices of the DOE Office of Nuclear Physics Isotope Development and Production for Research Applications Program. The IPF beamline operates with a fixed 100-MeV energy proton beam, diverted from the LANSCE accelerator and guided towards the isotope production target station. The fixed beam energy limits the number of isotopes that can be produced at IPF, and adversely affects the purity of isotopes produced at non-optimal energies. In particular, the IPF program is receiving increasing numbers of requests for high purity isotopes such as Np-236 (national security applications) and Re-186 (medical therapy). These are typically produced via (p,n) and (p,2n) nuclear reactions, requiring very tight control of the incident energies on the production targets to ensure an end product with a high radionuclidic purity. It is well known that this level of energy control cannot be achieved when a 100 MeV beam of mono-energetic protons is degraded to the required energies, typically below 30 MeV, as too much energy spread is acquired. Operating the IPF beamline at lower, mono-energetic beam energies such as at 40 MeV will allow the required tight energy control in target assemblies to ensure a high purity product. In addition, NP has requested a LANL/BNL/ORNL collaboration focus on establishing a national large-scale production capability for the therapy isotope Ac-225. Recent nuclear cross section measurements done at LANL show that due to a steep rise in production cross section towards higher proton energies (See Figure 2), proton beams at energies substantially greater than 100 MeV will be highly beneficial for Ac-225 production [AC255]. Such higher-energy beams cannot be delivered to IPF at present. Lower-energy beams (70 MeV and 40 MeV) can be delivered but only in sole-use mode; all other LANSCE users must be offline during 70 MeV or 40 MeV operation.

07 ISOTOPE AND RADIATION SOURCES↗

Application of a radial radio-frequency electron gun to waste treatment

Electron-beam irradiation has been shown to be a clean, efficient, and effective technique for treating a variety of contaminants in a variety of media. In particular, the ionizing radiation produced by an electron beam can effectively decontaminate wastewater and aid in removing harmful chemicals from industrial flue gas. In this paper, we investigate a novel technique for waste treatment using an electron-beam system in which an (approximately) annular beam converges radially into the treatment volume. We provide preliminary system-level analysis of the design of a radial electron gun, and we discuss hypothetical system constructs in which a radial electron gun is used for treatment of flue gas and wastewater. We derive dose uniformity, throughput rates, and other important treatment parameters for each application. Our results suggest that a lower-energy system with a large-radius cylindrical treatment volume is preferable for flue gas treatment, whereas a higher-energy system with an annular treatment volume is better-suited for wastewater treatment.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

LANL Accelerator Activities for C-band

LANL has a range of accelerator activities that would benefit from improvements in RF resonator performance. XFEL (presently using a SRF baseline similar to LCLS-II) would benefit from much higher gradient and long-pulse operation of copper structures. Higher gradient RF structures for lower energy accelerators (~100 MeV) would also provide a path to transportable systems, such as ICS sources. Lastly, the utilization of dielectrics could be exploited for increased efficiency and compactness, e.g. for accelerator in space efforts. A LANL R&D effort aims at systematic improvement of copper structures employing material science simulations to explain and improve breakdown effects, combined with highly optimized designs, integration of cryo-cooling and the use of dielectric insertions. The work is integrated into a High-Gradient collaboration between SLAC, UCLA and LANL.

43 PARTICLE ACCELERATORS↗

Superluminal antenna

A superluminal antenna element integrates a balun element to better impedance match an input cable or waveguide to a dielectric radiator element, thus preventing stray reflections and consequent undesirable radiation. For example, a dielectric housing material can be used that has a cutout area. A cable can extend into the cutout area. A triangular conductor can function as an impedance transition. An additional cylindrical element functions as a sleeve balun to better impedance match the radiator element to the cable.

42 ENGINEERING↗

Superluminal antenna

A superluminal antenna element integrates a balun element to better impedance match an input cable or waveguide to a dielectric radiator element, thus preventing stray reflections and consequent undesirable radiation. For example, a dielectric housing material can be used that has a cutout area. A cable can extend into the cutout area. A triangular conductor can function as an impedance transition. An additional cylindrical element functions as a sleeve balun to better impedance match the radiator element to the cable.

36 MATERIALS SCIENCE↗

Resonant coupling applied to superconducting accelerator structures

The concept of resonant coupling and the benefits that accrue from its application is well known in the world of room temperature coupled cavity linacs. Design studies show that it can be applied successfully between sections of conventional elliptical superconducting coupled cavity accelerator structures and internally to structures with spoked cavity resonators. The coupling mechanisms can be designed without creating problems with high field regions or multipactoring. The application of resonant coupling to superconducting accelerators eliminates the need for complex cryogenic mechanical tuners and reduces the time needed to bring a superconducting accelerator into operation.

43 PARTICLE ACCELERATORS↗