Engineering Papers⌕ Search

Engineering topics

Kovnir, Kirill

Publications and source records attributed to Kovnir, Kirill.

16 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Metallic d-wave altermagnetism in WFeB: a platform for electrically switchable perpendicular spin-splitter response

We report the synthesis and magnetic characterization of WFeB and identify it as a metallic d-wave altermagnet representative of a broader TiNiSi-type family. Neutron diffraction, Mössbauer spectroscopy, and magnetometry establish a collinear altermagnetic ordering confirmed by first-principles calculations. The electronic structure shows a nonrelativistic spin splitting of approximately 100 meV, but it also supports a strong spin-splitter transport response. This demonstrates that efficient spin-current generation can occur even with such modest band splitting. Symmetry analysis shows that selected film orientations permit deterministic switching of the Néel vector by current-induced staggered torques, enabling electrical control of a perpendicular spin-splitter response. These results establish WFeB and related TiNiSi-type antiferromagnets as a platform for electrically switchable charge-to-spin conversion driven by altermagnetic symmetry.

FOS: Physical sciences↗
DOE OSTI2024

FeSi 4 P 4 and CoSi 3 P 3 : Hidden Gems of Ternary Tetrel Pnictides with Outstanding Nonlinear Optical Properties

Metal silicon phosphides have shown promise as nonlinear optical materials. To be practically useful and cheap, earth-abundant 3d transition metals are preferred over their scarcer and more expensive 4d and 5d counterparts. Here, we developed a synthetic method to produce polycrystalline bulk powders and millimeter-sized single crystals of ternary compounds FeSi 4 P 4 and CoSi 3 P 3 . Both studied compounds have noncentrosymmetric and chiral crystal structures with ordered Si/P arrangements as was confirmed by single-crystal X-ray diffraction and solid-state NMR. Despite the presence of the transition metal, FeSi 4 P 4 and CoSi 3 P 3 are semiconductors with direct band gaps of 1.3 and 1.6 eV, respectively, indicating low-spin d 6 electronic configuration for octahedral Fe 2+ and Co 3+ . Relative to reported sulfide materials, FeSi 4 P 4 and CoSi 3 P 3 small band gap semiconductors demonstrate an outstanding combination of second-harmonic generation (SHG) activity and laser damage threshold (LDT). Both studied materials are phase-matchable with a 2.09 μm laser and not only exhibit 2.5–3.0 times stronger SHG signal than that of the state-of-the-art AgGaS 2 standard but also demonstrate an LDT response of 2.3–2.5 times higher than that of AgGaS 2 (at 1.09 μm laser with a pulse width of 10 ns)-which is unprecedented for small band gap semiconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Low‐Temperature Synthesis of Stable CaZn 2 P 2 Zintl Phosphide Thin Films as Candidate Top Absorbers

Abstract The development of tandem photovoltaics and photoelectrochemical solar cells requires new absorber materials with bandgaps in the range of ≈1.5–2.3 eV, for use in the top cell paired with a narrower‐gap bottom cell. An outstanding challenge is finding materials with suitable optoelectronic and defect properties, good operational stability, and synthesis conditions that preserve underlying device layers. This study demonstrates the Zintl phosphide compound CaZn 2 P 2 as a compelling candidate semiconductor for these applications. Phase‐pure, ≈500 nm‐thick CaZn 2 P 2 thin films are prepared using a scalable reactive sputter deposition process at growth temperatures as low as 100 °C, which is desirable for device integration. Ultraviolet‐visible spectroscopy shows that CaZn 2 P 2 films exhibit an optical absorptivity of ≈10 4 cm −1 at ≈1.95 eV direct bandgap. Room‐temperature photoluminescence (PL) measurements show near‐band‐edge optical emission, and time‐resolved microwave conductivity (TRMC) measurements indicate a photoexcited carrier lifetime of ≈30 ns. CaZn 2 P 2 is highly stable in both ambient conditions and moisture, as evidenced by PL and TRMC measurements. Experimental data are supported by first‐principles calculations, which indicate the absence of low‐formation‐energy, deep intrinsic defects. Overall, this study shall motivate future work integrating this potential top cell absorber material into tandem solar cells.

14 SOLAR ENERGY↗
DOE OSTI2024

A Ba 6 Cu 31 Te 22 ( A = K, Rb, Cs) Featuring Polyanionic Copper–Telluride Frameworks with Ultralow Thermal Conductivity

In this study, hree polyanionic tellurides, ABa 6 Cu 31 Te 22 (A = K, Rb, Cs), were synthesized in salt flux. The isostructural tellurides crystallize in a new structure type, in the cubic Pa$\overline{3}$ space group with a Wyckoff sequence of d 10 c 2 b 1 and large unit cell volumes of over 5500 Å 3 . The structures feature a framework of [CuTe 4 ] tetrahedra and [CuTe 3 ] trigonal pyramids with disorder in the Cu sites. The polyanionic frameworks have large square antiprism and cuboctahedral voids where Ba and alkali metal cations are situated, forming [BaTe 8 ] and [ATe 12 ], respectively. The overall compositions are close to being charge balanced. The large [ATe 12 ] cuboctahedra allowed for significant anisotropic displacement of the A cations, as observed from both single crystal X-ray diffraction and heat capacity studies. Alkali cations rattling together with Cu atom displacement and disorder leads to the dispersion of phonons, thus softening the lattice and subsequently reducing the thermal conductivity. Evaluations of the electronic band structure revealed the occurrence of a narrow bandgap together with the presence of a flat band near the valence band maximum, giving rise to the high thermopower. The Cs and Rb analogues show a slope change in the temperature dependence of electrical resistivity around room temperature, which is typical for semimetals or degenerate semiconductors. For the as-synthesized and unoptimized materials, high values of the thermoelectric figure-of-merit of ~0.2 were observed at 623 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Discovery of Ternary Antimonides A–Al–Sb (A = Rb or Cs) with Desired Structural Motifs Guided by Machine Learning

Specific structural motifs in inorganic solids are often related to their targeted physical properties. For many classes of solids, such as Zintl phases and polar intermetallics, the crystal structures are diverse and not easy to predict. Various antimonides that are potential thermoelectric materials were proposed to be synthesizable on the basis of their estimated formation energies. Their structures were broadly classified as clathrate, channel, layered, or network through a machine learning model trained on existing ternary phases and features based on elemental properties using the sure independence screening and sparsifying operator algorithm. Through experimental validation, three new ternary antimonides were synthesized and confirmed to form layered structures: tetragonal RbAlSb 2 and CsAlSb 2 , which are isopointal but not isotypic to LiBSi 2 ; and monoclinic Rb 2 Al 2 Sb 3 , which adopts the Na 2 Al 2 Sb 3 -type structure. Finally, reinvestigation of the related compound Cs 2 In 2 Sb 3 revealed a low thermal conductivity and p-type semiconducting behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Unveiling a Family of Dimerized Quantum Magnets, Conventional Antiferromagnets, and Nonmagnets in Ternary Metal Borides

Dimerized quantum magnets are exotic crystalline materials where Bose–Einstein condensation of magnetic excitations can happen. However, known dimerized quantum magnets are limited to only a few oxides and halides. Here, we unveil 9 dimerized quantum magnets and 11 conventional antiferromagnets in ternary metal borides MTB 4 (M = Sc, Y, La, Ce, Lu, Mg, Ca, and Al; T = V, Cr, Mn, Fe, Co, and Ni), where T atoms are arranged in structural dimers. Quantum magnetism in these compounds is dominated by strong antiferromagnetic (AFM) interactions between Cr (Cr and Mn for M = Mg and Ca) atoms within the dimers, with much weaker interactions between the dimers. These systems are proposed to be close to a quantum critical point between a disordered singlet spin-dimer phase, with a spin gap, and the ordered conventional Néel AFM phase. They greatly enrich the materials inventory that allows investigations of the spin-gap phase. Conventional antiferromagnetism in these compounds is dominated by ferromagnetic Mn (Fe for M = Mg and Ca) interactions within the dimers. The predicted stable and nonmagnetic (NM) YFeB 4 phase is synthesized and characterized, providing a scarce candidate to study Fe dimers and Fe ladders in borides. The identified quantum, conventional, and NM systems provide a platform with abundant possibilities to tune the magnetic exchange coupling by doping and study the unconventional quantum phase transition and conventional magnetic transitions. Finally, this work opens new avenues for studying novel magnetism in borides arising from spin dimers and establishes a theoretical workflow for future searches for dimerized quantum magnets in other families of materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Organizing Chaos: Boosting Thermoelectric Properties by Ordering the Clathrate Framework of Ba 8 Cu 16 As 30

The type I clathrate, Ba 8 Cu 16 As 30 , is reinvestigated and found to have a low-temperature polymorph mP 108-Ba 8 Cu 16 As 30 with ordered Cu and As sites. In situ temperature-dependent powder X-ray diffraction experiments guided synthetic efforts toward the synthesis of the ordered monoclinic ( mP 108) and disordered cubic ( cP 54) polymorphs with high phase purity. While a transition from mP 108-Ba 8 Cu 16 As 30 to cP 54-Ba 8 Cu 16 As 30 is not directly observed, cP 54-Ba 8 Cu 16 As 30 is stabilized through quenching from high temperatures and is confirmed through high-resolution synchrotron powder X-ray diffraction. Further, combined theoretical predictions and experimental observations of the thermoelectric properties of both polymorphs reveal that the ordering of Cu and As atoms in the clathrate framework simultaneously enhances the Seebeck coefficient and electronic conductivity by increasing the hole effective mass and reducing the electronic scattering events. Consequently, the zT of mP 108-Ba 8 Cu 16 As 30 reaches a maximum of 0.2 at 575 K, an order of magnitude higher than that of cP 54-Ba 8 Cu 16 As 30 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A Recipe for a Great Meal: A Benchtop Route from Elemental Se to Superior Thermoelectric β-Ag 2 Se

The low-temperature modification of β-Ag 2 Se has proven to be useful as a near-room-temperature thermoelectric material. Over the past years, research has been devoted to interstitial, vacancy, and substitutional doping into the parent β-Ag 2 Se structure, aiming at tuning the material’s charge and heat transport properties to enhance thermoelectric performance. The transformation of β-Ag 2 Se into α-Ag 2 Se at ~134 °C and the low solubility of dopants are the main obstacles for the doping approach. Herein, we report a facile, safe, scalable, and cost-effective benchtop approach to successfully produce metal-doped β-Ag 2 Se. The doped materials display a remarkable enhancement of thermoelectric performance with a record-high peak zT of 1.30 at 120 °C and an average zT of ~1.15 in the 25–120 °C range for 0.2 at. % Zn-doped Ag 2 Se. The enhancement in zT is attributed to point defects created by Zn doping into Ag vacancies/interstitials, which enhances the scattering of phonons and tunes the charge carrier properties, leading to the significant suppression of thermal conductivity. In conclusion, the simplicity of the synthetic method developed herein and the high performance of the final products provide an avenue to produce high-quality Ag 2 Se-based thermoelectric materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Enhancing Properties with Distortion: A Comparative Study of Two Iron Phosphide Fe 2 P Polymorphs

Iron phosphide (Fe 2 P) crystallizes in its own hexagonal crystal structure type (h-Fe 2 P). As found in meteorites, orthorhombic polymorph (o-Fe 2 P) was originally reported as a high-temperature and high-pressure phase. Recently, o-Fe 2 P was described as being stable at ambient pressure, yet no synthetic methods were developed for single-crystal growth or single-phase bulk powder synthesis. Here, we report a successful method for growing o-Fe 2 P single crystals and synthesizing phase-pure polycrystalline samples using tin-flux. In situ powder X-ray diffraction studies showed that the phase transition from o-Fe 2 P to h-Fe 2 P occurs at about 873 K, and below that temperature, the formation of the o-Fe 2 P phase is favored thermodynamically rather than kinetically. Systematic comparison of transport, magnetic, and electrocatalytic properties of both h-Fe 2 P and o-Fe 2 P phases showed a substantial impact of the crystal structure on properties. The orthorhombic structural distortion resulted in considerable changes in magnetic properties, with the o-Fe 2 P phase exhibiting a 60% lower Fe magnetic moment and a substantially higher ferromagnetic Curie temperature than h-Fe 2 P. Further, electrochemical measurements toward the hydrogen evolution reaction in acidic media showed that the o-Fe 2 P phase requires an 80 mV lower overpotential than the h-Fe 2 P phase to generate a current density of -10 mA/cm 2 , and their electronic structures suggest that the higher density of states at the Fermi energy is the origin of superior catalytic activity in o-Fe 2 P.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Inducing Ferrimagnetic Exchange in 1D-FeSe 2 Chains Using Heteroleptic Amine Complexes: [Fe(en)(tren)][FeSe 2 ] 2

[Fe(en)(tren)][FeSe 2 ] 2 (en = ethylenediamine, C 2 H 8 N 2 , tren = tris(2-aminoethyl)amine, C 6 H 18 N 4 ) has been synthesized by a mixed-ligand solvothermal method. Its crystal structure contains heteroleptic [Fe(en)(tren)] 2+ complexes with distorted octahedral coordination, incorporated between 1D-FeSe 2 chains composed of edge–sharing FeSe 4 tetrahedra. The twisted octahedral coordination environment of the Fe–amine complex leads to partial dimerization of Fe–Fe distances in the FeSe 2 chains so that the FeSe 4 polyhedra deviate strongly from the regular tetrahedral geometry. 57 Fe Mössbauer spectroscopy reveals oxidation states of +3 for the Fe chain atoms and +2 for the Fe complex atoms. The close proximity of Fe atoms in the chains promotes ferromagnetic nearest neighbor interactions, as indicated by a positive Weiss constant, θ = +53.8(6) K, derived from the Curie–Weiss fitting. Magnetometry and heat capacity reveal two consecutive magnetic transitions below 10 K. DFT calculations suggest that the ordering observed at 4 K is due to antiferromagnetic intrachain interactions in the 1D-FeSe 2 chains. The combination of two different ligands creates an asymmetric coordination environment that induces changes in the structure of the Fe–Se fragments. Finally, this synthetic strategy opens new ways to explore the effects of ligand field strength on the structure of both Fe-amine complexes and surrounding Fe–Se chains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗