Engineering Papers⌕ Search

Engineering topics

Kourtides, D. A.

Publications and source records attributed to Kourtides, D. A..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Insulating Blankets Withstand Higher Temperatures

Thermal-insulation blankets withstand repeated exposure to temperatures up to 2,000 degrees C. Thin, light in weight, and flexible. Developed to protect proposed aerospacecraft like Aeroassisted Space Transfer Vehicle and National Aerospace Plane, exposed to temperatures higher than those on surface of Space Shuttle during reentry into atmosphere of Earth. Also useful as furnace insulation and in firefighters' clothing. Sewing threads made of silicon carbide yarn essential components of blankets.

Kourtides, D. A.↗
NASA NTRS1993

Improved Composite Flexible Blanket Insulation

Improved composite flexible blanket insulation is quilt of layers of advanced lightweight insulating materials. Each layer designed to optimize contribution to inhibition of radiative, conductive, and/or convective transfer of heat from hot side to cold side. Intended to protect spacecraft against heating during reentry into atmosphere, used on Earth where requirements for lightweight, flexible, highly efficient insulating materials protect people and equipment against temperatures up to about 1,650 degrees C. Such as, furnace curtains and insulating layers on firefighting equipment and protective clothing.

Kourtides, D. A.↗
NASA NTRS1992

Phosphorus Moieties Make Polymers Less Flammable

Phosphorus incorporated into epoxies and polyamides via curing agent. According to report, use of 1-(di(2-chloroethoxyphosphinyl)methyl)-2,4- and -2,6-diaminobenzene (DCEPD) as curing agent for epoxies and polyamides makes these polymers more fire-retardant than corresponding polymers made with standard curing agents not containing phosphorus.

Kourtides, D. A.↗
NASA NTRS1992

Thermal response of rigid and flexible insulations and reflective coating in an aeroconvective heating environment

Described here is the thermal performance of rigid and flexible thermal protection systems considered for potential use in future Aeroassist Space Transfer Vehicles. The thermal response of these materials subjected to aeroconvective heating from a plasma arc is described. Properties that were measured included the thermal conductivity of both rigid and flexible insulations at various temperatures and pressures and the emissivity of the fabrics used in the flexible insulations. The results from computerized thermal analysis models describing the thermal response of these materials subjected to flight conditions are included.

Kourtides, D. A.↗
NASA NTRS1991

Tests Of Flexible Multilayer Insulations

Composite blankets containing reflective layers compared with fibrous silica insulation. Report describes experimental and theoretical study of 11 flexible insulating blankets ranging in thickness from 1.0 to 2.5 in. Multilayer insulations intended for use in partial vacuums of outer planetary atmospheres, where mean free paths of gas molecules much less than characteristic lengths of cells in insulation and consequently conductive and convective effects of gas minimal.

Kourtides, D. A.↗
NASA NTRS1990

Polymeric Additives For Graphite/Epoxy Composites

Report describes experimental studies of properties of several graphite/epoxy composites containing polymeric additives as flexibilizing or toughening agents. Emphasizes effects of brominated polymeric additives (BPA's) with or without carboxy-terminated butadiene acrylonitrile rubber. Reviews effects of individual and combined additives on fracture toughnesses, environmental stabilities, hot/wet strengths, thermomechanical behaviors, and other mechanical properties of composites.

Kourtides, D. A.↗
NASA NTRS1989

Ceramic insulation/multifoil composite for thermal protection of reentry spacecraft

A new type of insulation blanket called Composite Flexible Blanket Insulation is proposed for thermal protection of advanced spacecraft in regions where the maximum temperature is not excessive. The blanket is a composite of two proven insulation materials: ceramic insulation blankets from Space Shuttle technology and multilayer insulation blankets from spacecraft thermal control technology. A potential heatshield weight saving of up to 500 g/sq m is predicted. The concept is described; proof of concept experimental data are presented; and a spaceflight experiment to demonstrate its actual performance is discussed.

Pitts, W. C.↗
NASA NTRS1989

Composite multilayer insulations for thermal protection of aerospace vehicles

Composite flexible multilayer insulation systems (MLI), consisting of alternating layers of metal foil and scrim cloth or insulation quilted together using ceramic thread, were evaluated for thermal performance and compared with a silica fibrous (baseline) insulation system. The systems studied included: (1) alternating layers of aluminoborosilicate (ABS) scrim cloth and stainless steel foil, with silica, ABS, or alumina insulation; (2) alternating layers of scrim cloth and aluminum foil, with silica or ABS insulation; (3) alternating layers of alumininum foil and silica or ABS insulation; and (4) alternating layers of aluminum-coated polyimide placed on the bottom of the silica insulation. The MLIs containing aluminum were the most efficient, measuring as little as half the backface temperature increase of the baseline system.

Kourtides, D. A.↗
NASA NTRS1988

Thermal properties of composites with bismaleimide-vinyl poly(styrylpyridine) blends

Thermal properties, flammability, and selected mechanical properties of eight different graphite composite panels fabricated using four different resin matrices and two types of graphite reinforcement were investigated and compared with the properties of an epoxy composite, MXB 7203. The resin matrices included XU71775/H795, a blend of vinyl poly(styrylpyridine) and bismaleimide; H795, a bismaleimide; Cycom 6162, a phenolic; and PSP 6022M, a poly(styrylpyridine). The graphite fiber was AS-4 used in the form of tape or fabric. It was found that the XU71775/H795 blend with the graphite tape was the optimum design giving the lowest heat release rate, while the control epoxy panel exhibited the highest total heat release and heat release rates, highest smoke and CO evolution, highest mass losses, and lowest oxygen index of all the composites tested.

Kourtides, D. A.↗
NASA NTRS1988

Fire-Retardant Decorative Inks For Aircraft Interiors

Report describes testing of commercial and experimental fire retardants for incorporation into acrylic printing inks used on aircraft-interior sandwich panels. Films of acrylic ink containing fire-retardant additives prepared by casting on glass plates. Solvent evaporated in vacuum, cast films cured at 80 to 100 degree C for 30 minutes in air-circulating oven. Thermochemical properties of films examined by thermogravimetric analysis and differential scanning calorimetry (DSC). Samples of inks cast on sheets of polyvinylfloride (PVF), and their limiting oxygen indices and smoke evolution measured.

Kourtides, D. A.↗
NASA NTRS1988

Bismaleimide-vinylpolystyrylpyridine graphite composites

Flammability, thermal, and selected mechanical properties of composites fabricated with epoxy and other thermally stable resin matrices are described. Properties which were measured included limiting-oxygen index, smoke evolution, thermal degradation products, total-heat release, heat-release rates, mass loss, flame spread, ignition resistance, thermogravimetric analysis and selected mechanical properties. This paper describes the properties of eight different graphite composite panels fabricated using four different resin matrices and two types of graphite reinforcement. The resin matrices included: XU71775/H795, a blend of vinylpolystyrylpyridine and bismaleimide; H795, a bismaleimide; Cycom 6162, a phenolic; and PSP 6022M, a polystyrylpyridine. The graphite fiber used was AS-4 in the form of either tape or fabric. The properties of these composites were compared with epoxy composites. It was determined that the blend of vinylpolystyrylpyridine and bismaleimide (XU71775/H795) with the graphite tape was the optimum design giving the lowest heat release rate.

Kourtides, D. A.↗
NASA NTRS1987

Review of thermal properties of graphite composite materials

Flammability, thermal, and selected mechanical properties of composites fabricated with epoxy and other thermally stable resin matrices are described. Properties which were measured included limiting-oxygen index, smoke evolution, thermal degradation products, total-heat release, heat-release rates, mass loss, flame spread, ignition resistance, thermogravimetric analysis, and selected mechanical properties. The properties of 8 different graphite composite panels fabricated using four different resin matrices and two types of graphite reinforcement are described. The resin matrices included: XU71775/H795, a blend of vinyl polystyryl pyridine and bismaleimide; H795, a bismaleimide; Cycom 6162, a phenolic; and PSP 6022M, a polystyryl pyridine. The graphite fiber used was AS-4 in the form of either tape or fabric. The properties of these composites were compared with epoxy composites. It was determined that the blend of vinyl polystyryl pyridine and bismaleimide (XU71775/H795) with the graphite tape was the optimum design giving the lowest heat release rate.

Kourtides, D. A.↗
NASA NTRS1986

Thermal and flammability characterization of graphite composites

Thermal, mechanical, and flammability properties of graphite composites fabricated with XU71775/H795, a bismaleimide/vinyl-polystyrylpyridine formulation; H795, a bismaleimide; Cycom 6162, a phenolic; and PSP 6022M, a polystyrylpyridine and two types of graphite reinforcement were evaluated and compared with a composite made with an epoxy resin as a matrix. The measured properties included limiting-oxygen index, smoke evolution, thermal degradation products, total-heat release, heat-release rates, mass loss, flame spread, ignition resistance, thermogravimetric analysis, and selected mechanical properties. It was found that the combination of XU71775/H795 with the graphite tape was the optimum design giving the lowest heat release rate.

Kourtides, D. A.↗
NASA NTRS1986

Lightweight, Fire-Resistant Graphite Composites

Aircraft safety improved with interior paneling made of new laminate with good thermophysical properties. Featuring lightweight graphite composite, laminate more heat-and flame-resistant and produces much less smoke in fire than commonly used epoxy-resin-containing laminates. New laminate prepared without epoxy resin. Graphite unidirectional cloth preimpregnated with blend of vinyl polystyrylpyridine and bismaleimide (VPSP-BMI). Either of two types of VPSP-BMI blend used, depending on method of preparation of chemicals and technique used to fabricate panel.

Kourtides, D. A.↗
NASA NTRS1986

Light weight fire resistant graphite composites

Composite structures with a honeycomb core and characterized by lightweight and excellent fire resistance are provided. These sandwich structures employ facesheets made up of bismaleimide-vinyl styrylpyridine copolymers with fiber reinforcement such as carbon fiber reinforcement. In preferred embodiments the facesheets are over layered with a decorative film. The properties of these composites make them attractive materials of construction aircraft and spacecraft.

Kourtides, D. A.↗
NASA NTRS1986

Polymer of phosphonylmethyl-2,4- and -2,6-diamino benzene and polyfunctional monomer

A phosphonyl methyl benzene is prepared by nitration to produce a 2,4-dinitro phosphonyl methyl benzene, which is then reduced to a diamino compound. The diamino compound is then used to cure a polymerizable monomer. The diamino compound may be polymerized with polyfunctional epoxides to produce heat and fire resistant polymer structures for making flame and fire resistant polymer structures such as for aircraft secondary structures.

Mikroyannidis, J. A.↗
NASA NTRS1985

Fire-retardant decorative inks for aircraft interiors

Commercial and experimental fire retardants were screened as potential fire retardants for acrylic printing inks used on aircraft interior sandwich panels. The fire retardants are selected according to their physical properties and their thermostabilities. A criterion for selecting a more stable fire retardant is established. Thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) are used to determine thermostabilities. Results show that the fire retardant formulations are more thermally stable than the acrylic ink control. It is determined that an ink formulation containing a brominated phenol and carboxy-terminated butadiene acrylonitrile which has been modified with a brominated polymeric additive (BPA), yields the highest limiting oxygen index (LOI) of all the compounds tested. All of the fire-retardant formulations have a higher oxygen index than the baseline acrylic ink.

Kourtides, D. A.↗