Engineering Papers⌕ Search

Engineering topics

Kornfeld, D. M.

Publications and source records attributed to Kornfeld, D. M..

12 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Optimization of the parameters for a rotating, mixed-phase reactor

The motion of small, monodisperse particles in fluid was studied in a horizontal, cylindrical container rotating about its axis. One instigation for the study was the common requirement for mixed-phase, chemical or biological reactors to maintain particles in suspension for extended periods. A cylindrical, rotating reactor can allow long-term particle suspension without particle collisions and resulting agglomeration. The purpose of this study was to verify parametric effects and optimize the time of particle suspension. The theoretical and experimental results were obtained for inert, constant-diameter particles of nearly neutral buoyancy. The centrifugal buoyancy and gravitation terms were both included in the equations of motion. Laser illumination, photography and computer imaging were used to measure experimental particle concentration.

Cleland, J. G.↗
NASA NTRS1988

The first products made in space: Monodisperse latex particles

The preparation of large particle size 3 to 30 micrometer monodisperse latexes in space confirmed that original rationale unequivocally. The flight polymerizations formed negligible amounts of coagulum as compared to increasing amounts for the ground-based polymerizations. The number of offsize large particles in the flight latexes was smaller than in the ground-based latexes. The particle size distribution broadened and more larger offsize particles were formed when the polymerizations of the partially converted STS-4 latexes were completed on Earth. Polymerization in space also showed other unanticipated advantages. The flight latexes had narrower particle size distributions than the ground-based latexes. The particles of the flight latexes were more perfect spheres than those of the ground-based latexes. The superior uniformity of the flight latexes was confirmed by the National Bureau of Standards acceptance of the 10 micrometer STS-6 latex and the 30 micrometer STS-11 latexes as Standard Reference Materials, the first products made in space for sale on Earth. The polymerization rates in space were the same as those on Earth within experimental error. Further development of the ground-based polymerization recipes gave monodisperse particles as large as 100 micrometer with tolerable levels of coagulum, but their uniformity was significantly poorer than the flight latexes. Careful control of the polymerization parameters gave uniform nonspherical particles: symmetrical and asymmetrical doublets, ellipsoids, egg-shaped, ice cream cone-shaped, and popcorn-shaped particles.

Vanderhoff, J. W.↗
NASA NTRS1987

The first products made in space - Monodisperse latex particles

Monodisperse latex particles developed by seeded emulsion polymerization on various Space Shuttle flights are analyzed. The flight hardware was composed of a monodisperse latex reactor and a support electronics package, and the particles were examined by optical microscopy and TEM. Data on the particle size distributions, larger and smaller off-size particles, and conversion-time curves for the particles are examined and compared to ground-based results. It is observed that the ground-based polymerizations have more coagulum than the flight polymerizations; the flight latex particles have narrower size distributions than the ground particles; and the number of off-size larger particles in the flight particles is smaller than in the ground data.

Vanderhoff, J. W.↗
NASA NTRS1986

Making Latex Microspheres in Space

Equipment yields larger, more uniform particles. Two NASA reports describe first commercial product to be manufactured in space. Product monodisperse latex, suspension of spherical particles of essentially same diameter. Carried aboard Space Shuttle on its orbital missions, monodisperse latex reactor (MLR) produces spheres of much larger size than possible on Earth. Mircospheres 30 micrometers in diameter produced, whereas 5 micrometers is limit for Earthbound reactors. Microspheres as large as 100 micrometers scheduled for production in MLR.

Kornfeld, D. M.↗
NASA NTRS1986

Preparation of large-particle-size monodisperse latexes in space

Results are reported of latex sphere polymerization experiments performed on two flights of the Columbia and three flights of the Challenger. The trials were carried out because polymerization of the spheres in space avoids coagulation, nucleation of a new crop of particles, and excessive stirring requirements, and allows growth of spheres larger than 4 microns diam. The Monodisperse Latex Reactor (MLR) held four stirred 100 cc sealed stainless steel cylindrical containers. The mixtures were monitored for the conversion times, volume decreases as spheres formed and the mixture temperature. The spheres were grown from 0.19 micron seeds. Details of the flight preparation efforts are outlined. In flights which did not experience mechanical malfunctions spheres 3-30 microns diam were grown that had noticeably lower size variations than did the ground-based control particles. The 10 micron diam spheres grown on STS-6 were accepted as standard reference material by the NBS and became the first products made in space to be commercially sold on earth; the 30 micron spheres also became NBS standards. The experiments confirmed all projected benefits of producing the spheres in space, as well as provided the opportunity to grow more larger offsize spheres by finishing the growths on earth.

Vanderhoff, J. W.↗
NASA NTRS1985

Monodisperse Latex Reactor (MLR): A materials processing space shuttle mid-deck payload

The monodisperse latex reactor experiment has flown five times on the space shuttle, with three more flights currently planned. The objectives of this project is to manufacture, in the microgravity environment of space, large particle-size monodisperse polystyrene latexes in particle sizes larger and more uniform than can be manufactured on Earth. Historically it has been extremely difficult, if not impossible to manufacture in quantity very high quality monodisperse latexes on Earth in particle sizes much above several micrometers in diameter due to buoyancy and sedimentation problems during the polymerization reaction. However the MLR project has succeeded in manufacturing in microgravity monodisperse latex particles as large as 30 micrometers in diameter with a standard deviation of 1.4 percent. It is expected that 100 micrometer particles will have been produced by the completion of the the three remaining flights. These tiny, highly uniform latex microspheres have become the first material to be commercially marketed that was manufactured in space.

Kornfeld, D. M.↗
NASA NTRS1984

Preparation of large-particle-size monodisperse latexes in space: The STS-3, STS-4, and STS-7 mission results

Large-particle-size monodisperse latexes were prepared on four STS missions of the space shuttles Columbia and Challenger using flight hardware comprising four automated 100 cm(3) polymerization reactors. Seven polymerizations carried out on the March 1982 STS-3 mission of the Columbia, and the April 1983 STS-6 and June 1983 STS-7 missions of the Challenger, gave monodisperse latexes of 5 to 18 micron diameter with narrower particle size distributions than the corresponding ground-based control polymerizations. The rates of polymerization in microgravity were the same as on Earth. The results of these experiments are reviewed, and the prospects of the development of a space production process are discussed.

Vanderhoff, J. W.↗
NASA NTRS1984

Preparation of large-particle-size monodisperse latexes in space - Polymerization kinetics and process development

Monodisperse polystyrene latexes are prepared by seeded emulsion polymerization; however, sizes larger than 2 microns are difficult to prepare because of the creaming and settling of the particles and their sensitivity to mechanical shear. Preparation in space would obviate the creaming and settling, and allow agitation just sufficient for good heat transfer and mixing. Three polymerizations yielding 3-5 micron size particles were carried out successfully on the third flight of the 'Columbia' launched Mar. 22, 1982; however, four polymerizations yielding sizes up to 10 microns on the fourth flight launched June 27, 1982 were incomplete owing to apparatus malfunction. The results of these polymerizations and the prospects of developing a preparative space process are reviewed.

Vanderhoff, J. W.↗
NASA NTRS1982

Preparation of large-particle-size monodisperse polystyrene latexes in microgravity

Three large-particle-size monodisperse latexes (3.44, 4.08, and 4.98 micron diameter) were prepared in an automated four-reactor apparatus on the third orbital mission of the 'Columbia' begun on March 22. Comparison with ground-based controls showed that the 4.98 micron-size flight sample was the more uniform; the uniformity at the other two sizes was about the same. The rates of polymerization in microgravity and on earth were the same within experimental error, demonstrating that radical-initiated vinyl addition polymerizations are unaffected by the weightless environment.

Vanderhoff, J. W.↗
NASA NTRS1981

Process for preparation of large-particle-size monodisperse latexes

Monodisperse latexes having a particle size in the range of 2 to 40 microns are prepared by seeded emulsion polymerization in microgravity. A reaction mixture containing smaller monodisperse latex seed particles, predetermined amounts of monomer, emulsifier, initiator, inhibitor and water is placed in a microgravity environment, and polymerization is initiated by heating. The reaction is allowed to continue until the seed particles grow to a predetermined size, and the resulting enlarged particles are then recovered. A plurality of particle-growing steps can be used to reach larger sizes within the stated range, with enlarge particles from the previous steps being used as seed particles for the succeeding steps. Microgravity enables preparation of particles in the stated size range by avoiding gravity related problems of creaming and settling, and flocculation induced by mechanical shear that have precluded their preparation in a normal gravity environment.

Vanderhoff, J. W.↗
NASA NTRS1977

Large-size monodisperse latexes as a commercial space product

Proposed spacelab production of large-size (2-40 micron diameter) monodispersed latexes is discussed. Explanations are given for the present lack of monodisperse particles in this size range. The four main topics discussed are: (1) the potential uses of these large particle size latexes, (2) why it is necessary for the particles to have a very narrow size distribution, (3) why large amounts of these monodisperse latexes are needed, and (4) why it is necessary to go to microgravity to prepare these latexes.

Kornfeld, D. M.↗