Engineering Papers⌕ Search

Engineering topics

Koleske, Daniel David

Publications and source records attributed to Koleske, Daniel David.

III-nitride core-shell nanowire arrayed solar cells

A solar cell based on a III-nitride hybrid nanowire-film architecture is demonstrated. It consists of a vertically-aligned array of InGaN/GaN multi-quantum well core-shell nanowires, electrically connected by a coalesced p-type InGaN canopy layer. This hybrid structure allows for standard planar device processing, solving an important challenge with nanowire device integration. It also enables various advantages such as higher indium composition InGaN layers via elastic strain relief, efficient carrier collection through thin layers, and enhanced light trapping. This proof-of-concept nanowire-based device presents a path forward for high-efficiency III-nitride solar cells. Fabricated III-nitride nanowire solar cells exhibit a photoresponse out to 2.1eV and short circuit current density of ~1 mA/cm 2 (1 sun AM1.5G).

Wierer Jr., Jonathan J.↗

Nanofabrication of tunable nanowire lasers via electron and ion-beam based techniques

GaN nanowires were created from planar GaN epilayers using a top-down fabrication technique consisting of a dry etch followed by an anisotropic wet etch. The GaN nanowires are m-plane bounded with tightly-controlled dimensions. Single-mode lasing was achieved with GaN nanowire with 130 nm diameter and 5 μm length. Numerical simulations based on a multimode laser theory indicate that the suppression of transverse and longitudinal side-modes is caused by strong mode competition and narrow gain bandwidth. For multiple mode GaN nanowire lasers with large diameter, we demonstrated that coupled nanowire pairs provide a mode selection mechanism through Vernier effect and become single mode lasers. Moreover, transverse-mode suppression and single-mode lasing is demonstrated in GaN nanowires in contact with gold substrates, which introduces an attenuation effect to the cavity modes. The finite-difference time domain simulations confirm the absorption effect, which give rise to a mode selection mechanism for realizing single mode operation.

Li, Qiming↗

A revolution in micropower : the catalytic nanodiode.

Our ability to field useful, nano-enabled microsystems that capitalize on recent advances in sensor technology is severely limited by the energy density of available power sources. The catalytic nanodiode (reported by Somorjai's group at Berkeley in 2005) was potentially an alternative revolutionary source of micropower. Their first reports claimed that a sizable fraction of the chemical energy may be harvested via hot electrons (a 'chemicurrent') that are created by the catalytic chemical reaction. We fabricated and tested Pt/GaN nanodiodes, which eventually produced currents up to several microamps. Our best reaction yields (electrons/CO{sub 2}) were on the order of 10{sup -3}; well below the 75% values first reported by Somorjai (we note they have also been unable to reproduce their early results). Over the course of this Project we have determined that the whole concept of 'chemicurrent', in fact, may be an illusion. Our results conclusively demonstrate that the current measured from our nanodiodes is derived from a thermoelectric voltage; we have found no credible evidence for true chemicurrent. Unfortunately this means that the catalytic nanodiode has no future as a micropower source.

30 DIRECT ENERGY CONVERSION↗

Nanoengineering for solid-state lighting.

This report summarizes results from a 3-year Laboratory Directed Research and Development project performed in collaboration with researchers at Rensselaer Polytechnic Institute. Our collaborative effort was supported by Sandia's National Institute for Nanoengineering and focused on the study and application of nanoscience and nanoengineering concepts to improve the efficiency of semiconductor light-emitting diodes for solid-state lighting applications. The project explored LED efficiency advances with two primary thrusts: (1) the study of nanoscale InGaN materials properties, particularly nanoscale crystalline defects, and their impact on internal quantum efficiency, and (2) nanoscale engineering of dielectric and metal materials and integration with LED heterostructures for enhanced light extraction efficiency.

36 MATERIALS SCIENCE↗

Final LDRD report : enhanced spontaneous emission rate in visible III-nitride LEDs using 3D photonic crystal cavities.

The fundamental spontaneous emission rate for a photon source can be modified by placing the emitter inside a periodic dielectric structure allowing the emission to be dramatically enhanced or suppressed depending on the intended application. We have investigated the relatively unexplored realm of interaction between semiconductor emitters and three dimensional photonic crystals in the visible spectrum. Although this interaction has been investigated at longer wavelengths, very little work has been done in the visible spectrum. During the course of this LDRD, we have fabricated TiO{sub 2} logpile photonic crystal structures with the shortest wavelength band gap ever demonstrated. A variety of different emitters with emission between 365 nm and 700 nm were incorporated into photonic crystal structures. Time-integrated and time-resolved photoluminescence measurements were performed to measure changes to the spontaneous emission rate. Both enhanced and suppressed emission were demonstrated and attributed to changes to the photonic density of states.

36 MATERIALS SCIENCE↗