Engineering topics
Publications and source records attributed to Knauss, W. G..
The goal of achieving a better understanding of the failure of complex composite structure is sought. This type of structure requires a thorough understanding of the behavior under load both on a macro and micro scale if failure mechanisms are to be understood. The two problems being studied are the failure at a panel/stiffener interface and a generic problem of failure at a stress concentration.
Graphite/epoxy laminates have a definite advantage with respect to the strength-to-weight relation over many standard engineering materials used in aerospace applications. However, this advantage is somewhat reduced by the sensitivity of these laminates to operational hazards, which include a low-velocity impact by foreign objects. Investigations conducted by Chai (1982) and Knauss et al. (1980) have been concerned with the growth of impact damage in compressively loaded laminates, and the visualization of such an impact damage. The present study represents a condensation of parts of these investigations, taking into account a determination of the damage-growth mechanism via real-time recording of the impact event. The material considered, a T300/5208 graphite/epoxy laminate, is typical of the configuration proposed for future heavily loaded primary structures. It has stiffness properties similar to those of the wing skins in existing transport aircraft.
When low speed objects impact composite laminated plates delamination may result. Under inplane compression such delaminations may buckle and tend to enlarge the delaminated area which can lead to loss of global plate stability. This process is modelled here in a first attempt by a delaminating beam-column wherein the local delamination growth, stability and arrest are governed by a fracture mechanics-based energy release rate criterion.
The phenomenological aspects of propagation damage due to low velocity impact on heavily loaded graphite-epoxy composite laminates were investigated using high speed photography coupled with the moire fringe technique. High speed moire motion records of the impacted specimens are presented. The results provide information on the time scale and sequence of the failure process. While the generation of the initial damage cannot always be separated temporally from the spreading of the damage, the latter takes place on the average with a speed on the order of 200 m/sec.
Research projects concerned with developing a theory of fracture of materials are discussed. The effects of the geometry of the structure and the loads acting on the structure as they influence the failure process are analyzed. The effects of the viscoelastic deformation characteristics of the bulk elastomer on failure behavior are examined. Additional material parameters which control the fracture process are identified.
Crack propagation model in linearly viscoelastic solid strip based on thermodynamics first law
Fracture mechanics and time dependent strength of elastic or viscoelastic solids adhesively jointed by soft polymeric bonding layer
The energy required to form a unit of new surface in the fracture of a polyurethane elastomer is determined. The rate sensitivity of the material has been reduced by swelling it in toluene. This paper primarily describes the experimental work of measuring the lower limit of the fracture energy. With this value and the creep compliance as a basis, the rate dependence of fracture energy for the unswollen material has been determined. It is thus shown that the dependence of the fracture energy on the rate of crack propagation can be explained by energy dissipation around the tip of the crack. Good agreement between the theoretically and experimentally determined relationships for the rate-sensitive fracture energy is demonstrated.
Fracture mechanics and time dependent strength of adhesive joints
Crack growth study in viscoelastic solids by linear continuum mechanics, discussing cyclic loads, composite solids mechanical behavior and thermodynamics
Viscoelastic-plastic solid delayed fracture associated with wedge formation of crazed material at crack tip
Crack propagation in antiplane shear by opening semipenny shaped cracks straddling front at 45 deg
Viscoelastic plate crack growth analysis within continuum mechanics framework as analog to Griffith problem
Crack propagation theory and testing of solid propellant and viscoelastic materials
Crack propagation under variable loads in linearly viscoelastic solids
Failure criteria for viscoelastic materials
Fracture energy and mechanical properties of polyurethane elastomers
Crack propagation and failure criteria studies for viscoelastic materials, particularly solid propellants