Engineering Papers⌕ Search

Engineering topics

Klemas, V.

Publications and source records attributed to Klemas, V..

At least 109 records · Page 6

Monitoring the dispersion of ocean waste disposal plumes from ERTS-1 and Skylab

The author has identified the following significant results. About forty miles off the Delaware coast is located the disposal site for waste discharged from a plant processing titanium dioxide. The discharge is a greenish-brown; 15-20% acid liquid which consists primarily of iron chlorides and sulfates. The barge which transports this waste has a 1,000,000 gallon capacity and makes approximately three trips to the disposal site per week. ERTS-1 MSS digital tapes are being used to study the dispersion patterns and drift velocities of the iron-acid plume. Careful examination of ERTS-1 imagery disclosed a fishhook-shaped plume about 40 miles east of Cape Henlopen caused by a barge disposing acid wastes. The plume shows up more strongly in the green band than in the red band. Since some acids have a strong green component during dumping and turn slowly more brownish-reddish with age, the ratio of radiance signatures between the green and red bands may give an indication of how long before the satellite overpass the acid was dumped. Enlarged enhancements of the acid waste plumes, prepared from the ERTS-1 MSS digital tapes aided considerably in studies of the dispersion of the waste plume. Currently acid dumps are being coordinated with ERTS-1 overpasses.

Klemas, V.↗

Skylab and ERTS-1 investigations of coastal land use and water properties

The author has identified the following significant results. ERTS-1 multispectral scanner and Skylab's S190A, S190B, and S192 data products were evaluated for their utility in studying current circulation, suspended sediment concentrations and pollution dispersal in Delaware Bay and in mapping coastal vegetation and land use. Imagery from the ERTS-1 MSS, S190A and S190B cameras shows considerable detail in water structure, circulation, suspended sediment distribution and within waste disposal plumes in shelf waters. These data products were also used in differentiating and mapping twelve coastal vegetation and land use classes. The spatial resolution of the S190A multispectral facility appears to be about 30 to 70 meters while that of the S190B earth terrain camera is about 10 to 30 meters. Such resolution, along with good cartographic quality, indicates a considerable potential for mapping coastal land use and monitoring water properties in estuaries and on the continental shelf. The ERTS-1 MSS has a resolution of about 70-100 meters. Moreover, its regular 18-day cycle permits observation of important changes, including the environmental impact of coastal zone development on coastal vegetation and ecology.

Klemas, V.↗

Tracking air-dropped drogues and dyes from aircraft in support of ERTS-1 circulation studies

The author has identified the following significant results. For two years ERTS-1 has been employed to investigate current circulation patterns in Delaware Bay under different tidal, flow, and wind conditions. Since sufficient numbers of current meters and boats are not available, air-droppable drogues and dye packs have been developed and tested. The drogues consist of a styrofoam float and a line to which is attached a stainless steel biplane. The length of the line determines at what depth currents will be monitored. The floats are color coded to distinguish their movement and mark the depth of the biplanes. Simultaneously floating and anchored dye packs of fluorescein dye have been deployed from aircraft. The movement of the dye and drogues is tracked by sequential aerial photography, using fixed markers on shore or on buoys as reference points to calibrate the scale and direction of drogue movement. The current data obtained by this technique is then used to annotate current circulation maps derived from ERTS-1 imagery.

Klemas, V.↗

A new device for acquiring ground truth on the absorption of light by turbid waters

The author has identified the following significant results. A new device, called a Spectral Attenuation Board, has been designed and tested, which enables ERTS-1 sea truth collection teams to monitor the attenuation depths of three colors continuously, as the board is being towed behind a boat. The device consists of a 1.2 x 1.2 meter flat board held below the surface of the water at a fixed angle to the surface of the water. A camera mounted above the water takes photographs of the board. The resulting film image is analyzed by a micro-densitometer trace along the descending portion of the board. This yields information on the rate of attenuation of light penetrating the water column and the Secchi depth. Red and green stripes were painted on the white board to approximate band 4 and band 5 of the ERTS MSS so that information on the rate of light absorption by the water column of light in these regions of the visible spectrum could be concurrently measured. It was found that information from a red, green, and white stripe may serve to fingerprint the composition of the water mass. A number of these devices, when automated, could also be distributed over a large region to provide a cheap method of obtaining valuable satellite ground truth data at present time intervals.

Klemas, V.↗

The application of large numbers of pleasure boats to collect synoptic sea-truth for ERTS-1 overpasses

The author has identified the following significant results. In order to interpret and annotate current circulation and suspended sediment concentration maps derived from ERTS-1 digital tapes, the University of Delaware has been collecting water samples and other data from boats and helicopters. In order to increase the number of samples at the exact time of the ERTS-1 pass over Delaware Bay, pleasure craft were organized to obtain samples of the entire test site. On the ERTS-1 pass of July second, scientists were stationed at three public boat launches along the Bay to hand out sampling packets to interested boaters. The packets contained two litre sampling bottles, a map, data card, and a pen. The boaters were asked to fill the two bottles between 11 and 11:15 a.m., mark their location on the map, and fill out the data card. Forty-nine packets were handed out of which 40 were returned (82%). Only four of the 40 were not in the alloted time range. This gave 36 real time data points covering approximately 30 nautical miles. The samples are being analyzed for sediment concentration, particle size, and salinity. Participating boaters will receive a copy of an ERTS image of the Delaware Bay and a summary report of the project. Because of the success of the project, future use of pleasure boaters is being planned.

Klemas, V.↗

Monitoring physical and chemical parameters of Delaware Bay waters with an ERTS-1 data collection platform

The author has identified the following significant results. Evaluation of the probe performances during the initial phase indicates that the dissolved oxygen sensor available as part of the package is not sufficiently reliable for long term operation. The turbidity probe requires frequent visits to the site to maintain it in proper operating condition. The cost of these visits would have to be weighed against the information obtained. The conductivity/salinity, temperature, pH, and depth indicators have worked extremely well over the course of the study. Monthly cleanings would maintain all these probes in top operating condition. Currently the accuracy of each measurement returned via satellite is being compared to the accuracy of the probe reading and water samples analyzed in the laboratory.

Klemas, V.↗

Inventories of Delaware's coastal vegetation and land-use utilizing digital processing of ERTS-1 imagery

The author has identified the following significant results. Analysis of ERTS-1 color composite images using analogy processing equipment confirmed that all the major wetlands plant species were distinguishable at ERTS-1 scale. Furthermore, human alterations of the coastal zone were easily recognized since such alterations typically involve removal of vegetative cover resulting in a change of spectral signature. The superior spectral resolution of the CCTs as compared with single band or composite imagery has indeed provided good discrimination through digital analysis of the CCTs with the added advantage of rapid production of thematic maps and data.

Klemas, V.↗

Inventory of Delaware's wetlands

A mapping technique utilizing the General Electric Multispectral Data Processing System to analyze NASA RB-57 color-infrared imagery and applied in the mapping of Delaware's wetlands is described. It is shown to represent a high-speed, cost-effective method for producing enhanced photomaps showing a number of spectral classes.

Klemas, V.↗

Skylab/EREP application to ecological, geological and oceanographic investigations of Delaware Bay

The author has identified the following significant results. NASA's ERTS-1 satellite and Skylab-EREP have both provided imagery suitable for investigating coastal vegetation, land use, current circulation, water turbidity, waste disposal, and sea state. Based on high contrast targets, such as piers and breakwaters, the ERTS-1 MSS seems to have a resolution of 70-100 meters, Skylab's S190A about 30-70 meters, and its S190B about 10-30 meters. Important coastal land use details can be more readily mapped using Skylab's imagery. On the other hand, the regular eighteen day cycle of ERTS-1 allows observation of important man-made and natural changes, and facilitates collection of ground truth. The Skylab/EREP multispectral scanner offers 13 spectral bands as compared to 4 bands on ERTS-1. However, EREP scanner tapes require special filtering to remove several types of noise and their conical line scan pattern must be linearized before small targets can be identified based on spatial features.

Klemas, V.↗

Comparison of ERTS-1 and Skylab-EREP for interdisciplinary coastal investigations

The author has identified the following significant results. NASA's ERTS-1 satellite and Skylab EREP have both provided imagery suitable for investigating coastal vegetation, land use, current circulation, water turbidity, waste disposal, and sea state. Based on high contrast targets, such as piers and breakwaters, the ERTS-1 MSS seems to have a resolution of 70-100 meters, Skylab's S190A about 30-70 meters, and its S190B about 10-30 meters. Important coastal land use details can be more readily mapped using Skylab's imagery. On the other hand, the regular eighteen day cycle of ERTS-1 allows observation of important manmade and natural changes, and facilitates collection of ground truth. The Skylab/EREP multispectral scanner offers 13 spectral bands as compared to 4 bands on ERTS-1. However, EREP scanner tapes require special filtering to remove several types of noise and their conical line scan pattern must be linearized before one can identify small targets based on spatial features.

Klemas, V.↗

Inventories of Delaware's coastal vegetation and land-use utilizing digital processing of ERTS-1 imagery

Digital analysis of ERTS-1 imagery was used in an attempt to map and inventory the significant ecological communities of Delaware's coastal zone. Eight vegetation and land use discrimination classes were selected: (1) phragmites communis (Giant Reed grass); (2) spartina alterniflora (Salt marsh cord grass); (3) spartina patens (Salt marsh hay); (4) shallow water and exposed mud; (5) deep water (2 meters); (6) forest; (7) agriculture; and (8) exposed sand and concrete. Canonical analysis showed that classification accuracy was quite good with spartina alterniflora, exposed sand-concrete, and forested land - all discriminated with between 94% and 100% accuracy. The shallow water-mud and deep water categories were classified with accuracies of 88% and 93% respectively. Phragmites communis showed a classification accuracy of 83% with all confusion occurring with spartina patens which may be due to use of mixed stands of these species as training sets. Discrimination of spartina patens was very poor (accuracy 52%).

Klemas, V.↗

Monitoring coastal water properties and current circulation with ERTS-1

Imagery and digital tapes from nine successful ERTS-1 passes over Delaware Bay during different portions of the tidal cycle have been analyzed with special emphasis on turbidity, current circulation, waste disposal plumes and convergent boundaries between different water masses. ERTS-1 image radiance correlated well with Secchi depth and suspended sediment concentration. Circulation patterns observed by ERTS-1 during different parts of the tidal cycle, agreed well with predicted and measured currents throughout Delaware Bay. Convergent shear boundaries between different water masses were observed from ERTS-1. In several ERTS-1 frames, waste disposal plumes have been detected 36 miles off Delaware's Atlantic coast. The ERTS-1 results are being used to extend and verify hydrodynamic models of the bay, developed for predicting oil slick movement and estimating sediment transport.

Klemas, V.↗

Coastal and estuarine studies with ERTS-1 and Skylab

Coastal vegetation, land use, current circulation, water turbidity, and ocean waste dispersion were studied by interpreting ERTS-1 and Skylab imagery with the help of ground truth collected during overpasses. Based on high-contrast targets such as piers and roads, the ERTS-1 multispectral scanner was found to have a resolution of 70-100 m, Skylab's S190A cameras about 20-40 m, and its S190B camera about 10-20 m. Important coastal land-use details can be more readily mapped using Skylab's imagery. On the other hand, the regular 18-day cycle of ERTS-1 allows observation of important man-made and natural changes, and facilitates collection of ground truth.

Klemas, V.↗

Correlation of coastal water turbidity and current circulation with ERTS-1 and Skylab imagery

The article reviews investigations of current circulation patterns, suspended sediment concentration, coastal frontal systems, and waste disposal plumes based on visual interpretation and digital analysis of ERTS-1 and Skylab/EREP imagery. Data on conditions in the Delaware Bay area were obtained from 10 ERTS-1 passes and one Skylab pass, with simultaneous surface and airborne sensing. The current patterns and sediments observed by ERTS-1 correlated well with ground-based observations. Methods are suggested which would make it possible to identify certain pollutants and sediment types from multispectral scanner data.

Klemas, V.↗