Engineering topics

Klein, Talysa R.

Publications and source records attributed to Klein, Talysa R..

7 records

DOE OSTI2023

Transparent Conductive Encapsulants for Photoelectrochemical Applications

Utilizing sunlight to directly perform photoelectrochemical reactions is a promising route to renewable, net carbon-neutral fuels. However, a common problem with solar fuel production is semiconductor degradation in aqueous environments. An ideal protection layer should (1) prevent solution from reaching the semiconductor, (2) maintain charge transfer to and from solution, and (3) be transparent to light above the semiconductor band gap. While there have been substantial advances toward layers that meet these requirements, they are not easily adapted to new surfaces or new reactions, which can make protection difficult for newly developed photoabsorbers and (photo)electrochemical reaction pairings. In this work, we demonstrate the use of transparent conductive encapsulants (TCEs) to meet these requirements while also allowing for photoelectrode- and reaction-agnostic adaptability. TCEs are composed of an ethyl-vinyl acetate matrix with embedded conductive metal-coated microspheres that can be laminated to semiconductors. First, the electrochemical behavior of TCE-coated electrodes for the reduction of methyl viologen is characterized, demonstrating through-TCE electrical conduction. Then, photoelectrochemical measurements on TCE-protected semiconductors demonstrate the flexibility of this protection scheme. Finally, long-term photoelectrochemical measurements probe the efficacy of TCEs as protection layers. These findings demonstrate the potential of TCEs as adaptable protection layers in various photoelectrochemical applications.

14 SOLAR ENERGY↗

DOE OSTI2022

A performance comparison between GaInP-on-Si and GaAs-on-Si 3-terminal tandem solar cells

The pursuit of ever-higher solar cell efficiencies has focused heavily on multijunction technologies. In tandem cells, subcells are typically either contacted via two terminals (2T) or four terminals (4T). Simulations show that the less-common three-terminal (3T) design may be comparable to 4T tandem cells in its compatibility with a range of materials, operating conditions, and methods for subcell integration, yet the 3T design circumvents shading losses of the 4T intermediate conductive layers. This study analyzes the performance of two superstrate 3T III-V-on-Si (III-V//Si) tandem cells: One has slightly greater current contribution from the Si bottom cell (GaInP//Si) and the other has substantially greater current contribution from the GaAs top cell (GaAs//Si). Our results show that both tandem cells exhibit the same efficiency (21.3%), thereby demonstrating that the third terminal allows for flexibility in the selection of the top cell material, similar to the 4T design.

14 SOLAR ENERGY↗

DOE OSTI2021

Fabrication, Measurement, and Modeling of GaInP/GaAs Three-Terminal Cells and Strings

Three-terminal (3T) GaInP/GaAs solar cells are fabricated from inverted-grown monolithic tandems and processed with external metal contacts suitable for easy interconnection. Prototype 3T tandems both with and without tunnel junctions are demonstrated. They are characterized as a function of two independent variables in a variety of configurations, with each configuration holding one of the contacts common to two source-meter units (SMUs). Each of these different measurement configurations completely characterizes the device by transforming the results into 6 unique device parameters and plotting the total power parametrically in two dimensions. The performance is fit using a 3T optoelectronic model that includes luminescent coupling as well as important resistances. Eight of these devices are interconnected in various voltage-constrained configurations to form voltage-matched (VM) strings. Measurement and analysis of these III-V devices and strings are generally applicable to all 3T photovoltaics.

photovoltaics↗

DOE OSTI2021

Homogenous Voltage-Matched Strings Using Three-Terminal Tandem Solar Cells: Fundamentals and End Losses

Strings constructed from three-terminal tandem (3TT) solar cells offer the performance benefits of voltage-matching (which reduces sensitivity to spectral variation), but without the subcell voltage isolation required by four-terminal cells. However, the circuitry for a 3TT string can become complex, making circuit analysis more challenging. Here, we illustrate the essential features of “homogenous” voltage-matched (VM) 3TT strings, for which all 3TT cells in the string are nominally identical (with the same design/doping sequence, such that they can be fabricated on the same manufacturing line). Several representative VM string configurations are explicitly considered, and used to describe the general construction of string I(V) curves. End losses intrinsic to these strings are discussed in detail, along with mitigation strategies to minimize their impact. Our analysis agrees with experimental results for eight-cell strings constructed from GaInP/GaAs 3TT devices.

14 SOLAR ENERGY↗

DOE OSTI2021

Lamination of transparent conductive adhesives for tandem solar cell applications

A transparent conductive adhesive (TCA) interlayer for mechanically stacked multijunction solar cells provides adhesive strength and electrical connection between sub-cells when stacked. The fabrication of TCA sheets from an ethyl-vinyl acetate (EVA) matrix and silver coated compliant conductive microspheres, similar to industry-standard EVA encapsulant sheets, compatible with a standard lamination process was developed. Blade coating TCA sheets using 3D printed blades and testing of vertical conduction through the interlayer with a TCA conductivity jig allowed for reproducible measurements and low-cost fabrication. The supplemental information provides design files to enable other researchers to produce their own blades and testing jigs. We identified 0.5 mm as an optimal blade height for producing lab-scale TCA sheets and 120 °C at 3 psi for 10 min as the optimal vacuum lamination process to minimize resistance and possible damage to samples. For TCA sheets with coverages between 0.75% and 9%, the series resistance was approximately 0.2 O cm2 which should result in minimal losses for one-sun photovoltaic applications.

14 SOLAR ENERGY↗

DOE OSTI2021

Stringing Monolithic Three Terminal III-V Tandems

Tandemdevicesarewellknowntosurpasssinglejunctions.However,thelimitationsofcurrent-matchingisaconcern for changing spectra in terrestrial applications. Three terminal tandem (3T) devices can be more robust to these variations resulting in higher energy yield than single junction devices and two terminal series-connected tandems. We fabricate one-sun 3T tandem devices made of inverted grown III-V tandem (GaInP/t/GaAs) as a prototype of 3T tandems for stringing and measurement demon- strations. We demonstrate 3T tandem measurements that can be used to understand the use of 3T tandems in various constrained configurations. We have demonstrated the improvement of unconstrained 3T tandem cells over 2T series-connected cells as the illumination changes. We present initial results for micro-module with up to 8 3T tandem devices to be strung together.

3T↗

DOE OSTI2020

III-V/Si Tandem Cells Utilizing Interdigitated Back Contact Si Cells and Varying Terminal Configurations

Integrating wide-bandgap III-V with Si solar cells has been shown to yield higher efficiencies than Si alone: As also presented at this conference, four-terminal efficiencies exceeding 32% have been attained. In this contribution, independent and electrically connected operation of the subcells in such tandem cells is examined. The optics of the tandem cell change significantly if a conducting interconnect, rather than an insulating glass slide, is required between the subcells. These effects are studied, and optically optimized structures for different types of tandem cell operation are presented. It is found that minimizing reflection at the conductive interface between the two cells while maintaining conductivity is the key challenge faced in such devices.

41 EE - Solar Energy Technologies Office (EE-4S)↗