King, David Q. | Engineering Papers

NASA NTRS1990

High temperature refractory member with radiation emissive overcoat

A radiation type heat dissipator for use in a plasma engine is formed of a refractory metal layer upon which there is deposited a radiation emissive coating made of a high emissivity material such as zirconium diboride. The radiation emissive coating has a surface emissivity coefficient substantially greater than the emissivity coefficient of the refractory metal and thereby enhances the optical radiating efficiency of the heat dissipator.

Deininger, William D.↗

NASA NTRS1989

An approach for quasi 1-D MPD analysis

A means of analyzing magnetoplasmadynamic acceleration in a quasi one-dimensional channel is presented. Slowly changing area and small curvature effects can be considered. Most importantly, this method exposes the Hall effect on gasdynamic and magnetosonic choking. A means of relating experimentally measured current stream lines to ohmic dissipation is described.

King, David Q.↗

NASA NTRS1988

High-Emissivity Coatings For High-Temperature Surfaces

Plasma-sprayed coatings increase cooling by thermal radiation. Coating of zirconium diboride on tungsten or molybdenum increases emissivity of surface to more than 0.6 at 2,000 degree C. Applied by plasma-arc spraying after surface cleaned and roughened to ensure adhesion.

Deininger, William D.↗

NASA NTRS1988

The NASA Electric Propulsion Program

The NASA OAST Propulsion, Power, and Energy Division supports an electric propulsion program aimed at providing benefits to a broad class of missions. Concepts which have the potential to enable or significantly benefit space exploration and exploitation are identified and advanced toward application in the near and far term. This paper summarizes recent program progress in mission/system analysis; in electrothermal, electrostatic, and electromagnetic propulsion technologies; and in propulsion/spacecraft integration.

Stone, James R.↗

NASA NTRS1988

The NASA Electric Propulsion Program

The NASA OAST Propulsion, Power, and Energy Division supports an electric propulsion program aimed at providing benefits to a broad class of missions. Concepts which have the potential to enable or significantly benefit space exploration and exploitation are identified and advanced toward application in the near and far term. This paper summarizes recent program progress in mission/system analysis; in electrothermal, electrostatic, and electromagnetic propulsion technologies; and in propulsion/spacecraft integration.

Stone, James R.↗

NASA NTRS1986

PEGASUS: A multi-megawatt nuclear electric propulsion system

A propulsion system (PEGASUS) consisting of an electric thruster driven by a multimegawatt nuclear power system is proposed for a manned Mars mission. Magnetoplasmadynamic and mercury-ion thrusters are considered, based on a mission profile containing a 510-day burn time (for a mission time of approximately 1000 days). Both thrusters are capable of meeting the mission parameters. Electric propulsion systems have significant advantages over chemical systems, because of high specific impulse, lower propellant requirements, and lower system mass. The power for the PEGASUS system is supplied by a boiling liquid-metal fast reactor. The power system consists of the reactor, reactor shielding, power conditioning subsystems, and heat rejection subsystems. It is capable of providing a maximum of 8.5 megawatts of electrical power of which 6 megawatts is needed for the thruster system, leaving 1.5 megawatts available for inflight mission applications.

Coomes, Edmund P.↗