Engineering Papers⌕ Search

Engineering topics

Kimura, Wayne D.

Publications and source records attributed to Kimura, Wayne D..

Density Tailored Capillary Discharge (Final Technical Report)

This final report describes efforts to validate a novel way to drive capillary discharges in order to achieve true matched guiding of a focused laser beam traveling along the capillary. Achieving such matched guiding is important for laser plasma accelerators, such as ones based upon laser wakefield acceleration. During this Phase II program, a computer model, which was specifically designed to predict the time-dependent behavior of the capillary discharge, was exercised to determine whether unconventional ways to drive the discharge may yield matched guiding. A custom power supply was built to drive the capillary discharge in the unconventional manner specified by the model. Experiments performed at STI Optronics seemed to support the predictions of this model; however, subsequent more accurate measurements performed at Lawrence Berkeley National Laboratory did not agree with the model predictions.

43 PARTICLE ACCELERATORS↗

Distributed Magnetic Measurements Using Fiber Optic Pulsed Polarimetry (Final Report)

Measurement of the magnetic fields surrounding magnetic fusion energy (MFE) devices, such as tokamaks, is critical for characterizing and monitoring the plasma inside these devices, and it is especially important for detecting plasma instabilities, which can lead to the plasma damaging the inside of these devices. This program successfully demonstrated a new type of magnetic field diagnostic that is capable for the first time of measuring simultaneously the spatial and temporal magnetic field distributions of MFE devices in real-time and with high resolution. This is a capability not feasible with existing magnetic field diagnostics and, moreover, the technique we developed provides other advantages, such as less susceptibility to noise, the ability to operate during both pulsed and steady-state plasma conditions, the ability to detect relatively weak poloidal fields, and potentially lower costs. This new capability of being able in real-time to detect anomalies in the magnetic field distribution corresponding to the onset of plasma instabilities offers the ability to automatically shut down the MFE device before the plasma can damage the machine. Hence, this machine protection capability can be vital for future fusion power stations. Our technique uses optical fibers where changes in the polarization of the laser light traveling through the fiber provide a direct measurement of the magnetic field at any point along the fiber. The small size of the fibers allows them to be easily installed either outside or inside the MFE vacuum vessel, and in any direction one wishes (e.g., poloidal or toroidal). We demonstrated the basic capabilities of our new diagnostic during a proof-of-principle experiment performed on the General Atomics DIII-D tokamak, and published the results in: W. D. Kimura, D. S. Dhillon, S. Munaretto, E. J. Strait, D. Du, S. Loranger, J.-S. Boisvert, and R. Kashyap, “Measurements of DIII-D poloidal field by fiber-optic pulsed polarimetry,” Rev. Sci, Inst. 89, 10J102 (2018).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Advanced Fiber Optic Sensor for Superconducting Magnets

The overall goal of this SBIR project was to demonstrate the viability of using a new type of magnetic field diagnostic for superconducting (SC) magnets, which we call fiber optic pulsed polarimetry (FOPP). This diagnostic utilizes optical fibers to sense the magnetic field (B-field) component oriented along the direction of the fiber to provide both spatial and temporal information about the B-field. It is based upon the Faraday effect in which the polarization of the light propagating through the fiber rotates due to the presence of a magnetic field. By measuring the amount of polarization rotation of the backscatter light from the optical fiber, it is possible to determine the B-field strength at the position along the fiber where the backscatter light originated from. Using a pulsed laser, it is also possible to obtain the time dependence of the magnetic field. During Phase I, STI Optronics, Inc. (STI) used the FOPP technique to characterize the magnetic field produced by a high-temperature superconducting (HTS) magnet pancake coil. The on-axis B-field distribution was measured and compared with Hall probe measurements. The temporal behavior of the B-field was also measured and showed how the field changed when the current through the coil was turned on and off.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗