Engineering Papers⌕ Search

Engineering topics

Kimes, D. S.

Publications and source records attributed to Kimes, D. S..

45 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Azimuthal radiometric temperature measurements of wheat canopies

The effects of azimuthal view angle on the radiometric temperature of wheat canopies at various stages of development are investigated. Measurements of plant height, total leaf area index, green leaf area index and Feeks growth stage together with infrared radiometric temperature measurements at 12 azimuth intervals with respect to solar azimuth and at different solar zenith angles were obtained for four wheat canopies at various heights. Results reveal a difference on the order of 2 C between the temperatures measured at azimuths of 0 and 180 deg under calm wind conditions, which is attributed to the time-dependent transfer of heat between canopy component surfaces. The azimuthal dependence must thus be taken into account in the determination of radiometric temperatures.

Kimes, D. S.↗
NASA NTRS1981

Thermal IR exitance model of a plant canopy

A thermal IR exitance model of a plant canopy based on a mathematical abstraction of three horizontal layers of vegetation was developed. Canopy geometry within each layer is quantitatively described by the foliage and branch orientation distributions and number density. Given this geometric information for each layer and the driving meteorological variables, a system of energy budget equations was determined and solved for average layer temperatures. These estimated layer temperatures, together with the angular distributions of radiating elements, were used to calculate the emitted thermal IR radiation as a function of view angle above the canopy. The model was applied to a lodgepole pine (Pinus contorta) canopy over a diurnal cycle. Simulated vs measured radiometric average temperatures of the midcanopy layer corresponded with 2 C. Simulation results suggested that canopy geometry can significantly influence the effective radiant temperature recorded at varying sensor view angles.

Kimes, D. S.↗
NASA NTRS1980

Vegetation reflectance measurements as a function of solar zenith angle

An understanding of the behavior of vegetation canopy reflectance as a function of solar zenith angle is important to several remote sensing applications. Spectral hemispherical-conical reflectances of a nadir looking sensor were taken throughout the day of a lodgepole pine and two grass canopies. Mathematical simulations of both a spectral hemispherical-conical reflectance factor and a spectral bi-hemispherical reflectance were performed for two theoretical canopies of contrasting geometric structure. These results and results from literature studies showed a great amount of variability of vegetation canopy reflectances as a function of solar zenith angle. Explanations for this variability are discussed and recommendations for future measurements are proposed.

Kimes, D. S.↗
NASA NTRS1980

View angle effects in the radiometric measurement of plant canopy temperatures

The thermal infrared sensor response from a wheat canopy was extremely non-Lambertian because of spatial variations in energy flow processes; the effective radiant temperature of the sensor varied as much as 13 C with changing view angle. This variation of sensor response was accurately quantified (root-mean-square of deviations between theoretical and measured responses reduced to 1.1 C) as a function of vegetation canopy geometry, vertical temperature distribution of canopy components, and sensor view angle. The results have important implications for optimizing sensor view angles for remote sensing missions.

Kimes, D. S.↗
NASA NTRS1980

Simulation of solar radiation absorption in vegetation canopies

A solar radiation canopy absorption model, including multiple scattering effects, was developed and tested for a lodgepole pine (Pinus contorta) canopy. Reflectance above the canopy, spectral transmittance to the ground layer, and geometric and spectral measurements of canopy elements were made. Relatively large differentials occurred in spectral absorption by canopy layers, especially in the photosynthetically active region, as a function of solar zenith angle. In addition, the proportion of total global irradiance absorbed by individual layers varied greatly as a function of solar zenith angle. However, absorption by the entire canopy system remained relatively constant.

Kimes, D. S.↗
NASA NTRS1980

Complexities of nadir-looking radiometric temperature measurements of plant canopies

Effective radiant temperatures (ERTs) of five wheat canopies in different stages of development were measured during morning and noon periods. The observed variability in nadir sensor response was quantitatively described as a function of canopy structure and the vertical temperature profile of canopy components. In many cases, the nadir sensor ERT was a poor measure of vegetation temperature due to effects of soil emissions. Strong vertical temperature profiles of vegetation components were also observed. The theory and measurements presented document that remote measurements of vegetation canopy temperatures cannot be made indiscriminately over large spatial regions without consideration of the underlying physical principles.

Kimes, D. S.↗
NASA NTRS1979

Interpreting vegetation reflectance measurements as a function of solar zenith angle

Spectral hemispherical-conical reflectances of a nadir looking sensor were taken throughout the day for a lodgepole pine and two grass canopies. Mathematical simulations of both spectral hemispherical-conical and bi-hemispherical reflectances were performed for two theoretical canopies of contrasting geometric structure. These results and comparisons with literature studies showed a great amount of variability of vegetation canopy reflectances as a function of solar zenith angle. Explanations for this variability are discussed and recommendations for further measurements are proposed.

Kimes, D. S.↗
NASA NTRS1979

Effects of vegetation canopy structure on remotely sensed canopy temperatures

The effects of vegetation canopy structure on thermal infrared sensor response must be understood before vegetation surface temperatures of canopies with low percent ground cover can be accurately inferred. The response of a sensor is a function of vegetation geometric structure, the vertical surface temperature distribution of the canopy components, and sensor view angle. Large deviations between the nadir sensor effective radiant temperature (ERT) and vegetation ERT for a soybean canopy were observed throughout the growing season. The nadir sensor ERT of a soybean canopy with 35 percent ground cover deviated from the vegetation ERT by as much as 11 C during the mid-day. These deviations were quantitatively explained as a function of canopy structure and soil temperature. Remote sensing techniques which determine the vegetation canopy temperature(s) from the sensor response need to be studied.

Kimes, D. S.↗