Engineering Papers⌕ Search

Engineering topics

Kim, J

Publications and source records attributed to Kim, J.

171 records · Page 10

An Introduction to the Material Point Method using a Case Study from Gas Dynamics

The Material Point Method (MPM) developed by Sulsky and colleagues is currently being used to solve many challenging problems involving large deformations and/or fragementations with considerable success as part of the Uintah code created by the CSAFE project. In order to understand the properties of this method an analysis of the considerable computational properties of MPM is undertaken in the context of model problems from gas dynamics. One aspect of the MPM method in the form used here is shown to have first order accuracy. Computational experiments using particle redistribution are described and show that smooth results with first order accuracy may be obtained.

97 MATHEMATICS AND COMPUTING↗

Methane hydrate formation in turbidite sediments of northern Cascadia IODP Expedition 311

Expedition 311 of the Integrated Ocean Drilling Program (IODP) to northern Cascadia recovered gas-hydrate bearing sediments along a SW–NE transect from the first ridge of the accretionary margin to the eastward limit of gas-hydrate stability. In this study we contrast the gas gas-hydrate distribution from two sites drilled ~8 km apart in different tectonic settings. At Site U1325, drilled on a depositional basin with nearly horizontal sedimentary sequences, the gas-hydrate distribution shows a trend of increasing saturation toward the base of gas-hydrate stability, consistent with several model simulations in the literature. Site U1326 was drilled on an uplifted ridge characterized by faulting, which has likely experienced some mass wasting events. Here the gas hydrate does not show a clear depth-distribution trend, the highest gas-hydrate saturation occurs well within the gas-hydrate stability zone at the shallow depth of ~49 mbsf. Sediments at both sites are characterized by abundant coarse-grained (sand) layers up to 23 cm in thickness, and are interspaced within fine-grained (clay and silty clay) detrital sediments. The gas-hydrate distribution is punctuated by localized depth intervals of high gas-hydrate saturation, which preferentially occur in the coarse-grained horizons and occupy up to 60% of the pore space at Site U1325 and N80% at Site U1326. Detailed analyses of contiguous samples of different lithologies show that when enough methane is present, about 90% of the variance in gas-hydrate saturation can be explained by the sand (N63 μm) content of the sediments. The variability in gas-hydrate occupancy of sandy horizons at Site U1326 reflects an insufficient methane supply to the sediment section between 190 and 245 mbsf.

03 NATURAL GAS↗

In-Situ Safeguards Verification of Low Burn-up Pressurized Water Reactor Spent Fuel Assemblies

A novel in-situ gross defect verification method for light water reactor spent fuel assemblies was developed and investigated by a Monte Carlo study. This particular method is particularly effective for old pressurized water reactor spent fuel assemblies that have natural uranium in their upper fuel zones. Currently there is no method or instrument that does verification of this type of spent fuel assemblies without moving the spent fuel assemblies from their storage positions. The proposed method uses a tiny neutron detector and a detector guiding system to collect neutron signals inside PWR spent fuel assemblies through guide tubes present in PWR assemblies. The data obtained in such a manner are used for gross defect verification of spent fuel assemblies. The method uses 'calibration curves' which show the expected neutron counts inside one of the guide tubes of spent fuel assemblies as a function of fuel burn-up. By examining the measured data in the 'calibration curves', the consistency of the operator's declaration is verified.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Screen charge transfer by grounded tip on ferroelectric surfaces.

We have investigated polarization reversal and charge transfer effects by a grounded tip on 50 nm thick ferroelectric thin films using piezoelectric force microscopy and Kelvin force microscopy. We observed the polarization reversal in the center of written domains, and also identified another mechanism, which is the transfer of screen charges toward the grounded tip. In order to overcome these phenomena, we successfully applied a modified read/write scheme featuring a bias voltage.

36 MATERIALS SCIENCE↗

Colossal positive magnetoresistance in a doped nearly magnetic semiconductor

We report on a positive colossal magnetoresistance (MR) induced by metallization of FeSb{sub 2}, a nearly magnetic or 'Kondo' semiconductor with 3d ions. We discuss the contribution of orbital MR and quantum interference to the enhanced magnetic field response of electrical resistivity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Laser Based In Situ Techniques: Novel Methods for Generating Extreme Conditions in TEM Samples

The Dynamic Transmission Electron Microscope (DTEM) is introduced as a novel tool for in situ processing of materials. Examples of various types of dynamic studies outline the advantages and differences of laser-based heating in the DTEM in comparison to conventional (resistive) heating in situ TEM methods. We demonstrate various unique capabilities of the drive laser, namely, in situ processing of nanoscale materials, rapid and high temperature phase transformations, and controlled thermal activation of materials. These experiments would otherwise be impossible without the use of the DTEM drive laser. Thus, the potential of the DTEM to as a new technique to process and characterize the growth of a myriad of micro and nanostructures is demonstrated.

36 MATERIALS SCIENCE↗

Characterization of Pd/c-Al2O3 Catalysts Prepared Using [Pd(hfac)2] in Liquid CO2

A series of Pd/{gamma}-Al{sub 2}O{sub 3} catalysts was prepared from (Pd(hfac){sub 2}) (hfac = hexafluoroacetylacetonate) in liquid carbon dioxide using the method reported by Kim et al. (Chem Mater 18:4710 (2006)). The catalysts were characterized using CO pulse chemisorption, diffuse-reflectance infrared Fourier transform spectroscopy (DRIFTS), X-ray absorption fine structure (XAFS) spectroscopy, X-ray photoelectron spectroscopy (XPS), and electron microscopy. The catalysts were reduced initially in the high-pressure CO{sub 2} reaction cell using H{sub 2} at 75 C. Samples were removed, stored in a desiccator, and re-reduced in situ at 250 C prior to pulse chemisorption, DRIFTS and XAFS. CO pulse chemisorption evidenced that the Pd dispersion decreased from 55% to 5% as the Pd loading increased from 0.58 to 3.94 wt.%. The as-prepared 0.58 and 1.77 wt.% Pd/{gamma}-Al{sub 2}O{sub 3} catalysts (after air exposure) contained oxidized Pd species that were converted after in situ reduction to supported Pd particles. The average Pd particle sizes of these two catalysts (16 and 23 {angstrom}, respectively) estimated from the first-shell Pd-Pd coordination numbers are in good agreement with the CO chemisorption results. DRIFTS evidenced a prevalence of weakly bound linear CO (CO = 2083 cm{sup -1}) adsorbed on the 0.58 wt.% Pd catalyst. A 2.95 wt% Pd catalyst (49 {angstrom} average particle size) also exhibited a strong linear CO band (CO = 2093 cm{sup -1}). In contrast, CO chemisorption on a commercial 1 wt.% Pd/Al{sub 2}O{sub 3} catalyst (37 {angstrom} average particle size) gave predominantly 2-fold bridging CO species. We infer that the supported Pd particles prepared from (Pd(hfac){sub 2}) are rougher on the atomic scale (with a higher percentage of edge and corner atoms) than equivalently sized particles in conventionally prepared Pd/{gamma}-Al{sub 2}O{sub 3} catalysts.

36 MATERIALS SCIENCE↗

Structure of Diethyl Phosphate Bound to the Binuclear Metal Center of Phosphotriesterase

The bacterial phosphotriesterase (PTE) from Pseudomonas diminuta catalyzes the hydrolysis of organophosphate esters at rates close to the diffusion limit. X-ray diffraction studies have shown that a binuclear metal center is positioned in the active site of PTE and that this complex is responsible for the activation of the nucleophilic water from solvent. In this paper, the three-dimensional structure of PTE was determined in the presence of the hydrolysis product, diethyl phosphate (DEP), and a product analogue, cacodylate. In the structure of the PTE-diethyl phosphate complex, the DEP product is found symmetrically bridging the two divalent cations. The DEP displaces the hydroxide from solvent that normally bridges the two divalent cations in structures determined in the presence or absence of substrate analogues. One of the phosphoryl oxygen atoms in the PTE-DEP complex is 2.0 Angstroms from the a-metal ion, while the other oxygen is 2.2 Angstroms from the {beta}-metal ion. The two metal ions are separated by a distance of 4.0 Angstroms. A similar structure is observed in the presence of cacodylate. Analogous complexes have previously been observed for the product complexes of isoaspartyl dipeptidase, d-aminoacylase, and dihydroorotase from the amidohydrolase superfamily of enzymes. The experimentally determined structure of the PTE-diethyl phosphate product complex is inconsistent with a recent proposal based upon quantum mechanical/molecular mechanical simulations which postulated the formation of an asymmetrical product complex bound exclusively to the {beta}-metal ion with a metal-metal separation of 5.3 Angstroms. This structure is also inconsistent with a chemical mechanism for substrate hydrolysis that utilizes the bridging hydroxide as a base to abstract a proton from a water molecule loosely associated with the a-metal ion. Density functional theory (DFT) calculations support a reaction mechanism that utilizes the bridging hydroxide as the direct nucleophile in the hydrolysis of organophosphate esters by PTE.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Magnetic state of La{sub 1.36}Sr{sub 1.64}Mn{sub 2}O{7} probed by magnetic force microscopy.

We have investigated the ferromagnetic (FM) domain structure of a single-crystal bilayered manganite La{sub 2-2x}Sr{sub 1+2x}Mn{sub 2}O{sub 7} (x = 0.32) by using low-temperature magnetic force microscopy. We observed that below 65 K, the FM domains form stable treelike patterns with out-of-plane magnetization. With increasing temperature, the FM domain patterns gradually change in the form of domain wall motion. Above 80 K, the FM domain patterns change more and more with each temperature step. The magnetization changes from the out-of-plane to an in-plane direction around 88 K. The in-plane FM domains almost completely disappear near the Curie temperature of this sample (T{sub c} {approx} 110 K), where the resistivity exhibits a sharp increase. We also observed large changes in the magnetic structures upon thermal cycling. We concluded that the formation of FM domains at low temperatures (T < 80 K) is determined by the energy associated with surface magnetic free poles and domain walls. At high temperatures (80 K < T < T{sub c}), the two-dimensional FM fluctuations in the basal plane may also play an important role in forming the domain structures. The evolution of the FM domain patterns with temperature coincides with the change in resistivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗