Engineering Papers⌕ Search

Engineering topics

Kim, J. H.

Publications and source records attributed to Kim, J. H..

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Overview of the KSTAR experiments toward fusion reactor

The Korean Superconducting Tokamak Advanced Research has been focused on exploring the key physics and engineering issues for future fusion reactors by demonstrating the long pulse operation of high beta steady-state discharge. Advanced scenarios are being developed with the goal for steady-state operation, and significant progress has been made in high ℓ i , hybrid and high beta scenarios with β N of 3. In the new operation scenario called fast ion regulated enhanced (FIRE), fast ions play an essential role in confinement enhancement. GK simulations show a significant reduction of the thermal energy flux when the thermal ion fraction decreases and the main ion density gradient is reversed by the fast ions in FIRE mode. Optimization of 3D magnetic field techniques, including adaptive control and real-time machine learning control algorithm, enabled long-pulse operation and high-performance ELM-suppressed discharge. Symmetric multiple shattered pellet injections (SPIs) and real-time disruption event characterization and forecasting are being performed to mitigate and avoid the disruptions associated with high-performance, long-pulse ITER-like scenarios. Finally, the near-term research plan will be addressed with the actively cooled tungsten divertor, a major upgrade of the NBI and helicon current drive heating, and transition to a full metallic wall.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

A sustained high-temperature fusion plasma regime facilitated by fast ions

Nuclear fusion is one of the most attractive alternatives to carbon-dependent energy sources. Harnessing energy from nuclear fusion in a large reactor scale, however, still presents many scientific challenges despite the many years of research and steady advances in magnetic confinement approaches. State-of-the-art magnetic fusion devices cannot yet achieve a sustainable fusion performance, which requires a high temperature above 100 million kelvin and sufficient control of instabilities to ensure steady-state operation on the order of tens of seconds. Here, in this study, we report experiments at the Korea Superconducting Tokamak Advanced Research device producing a plasma fusion regime that satisfies most of the above requirements: thanks to abundant fast ions stabilizing the core plasma turbulence, we generate plasmas at a temperature of 100 million kelvin lasting up to 20 seconds without plasma edge instabilities or impurity accumulation. A low plasma density combined with a moderate input power for operation is key to establishing this regime by preserving a high fraction of fast ions. This regime is rarely subject to disruption and can be sustained reliably even without a sophisticated control, and thus represents a promising path towards commercial fusion reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Complex pressure-temperature structural phase diagram of the honeycomb iridate Cu 2 IrO 3

Cu 2 IrO 3 is among the newest layered honeycomb iridates and a promising candidate to harbor a Kitaev quantum spin liquid state. Here, we investigate the pressure and temperature dependence of its structure through a combination of powder x-ray diffraction and x-ray absorption fine structure measurements, as well as ab initio evolutionary structure search. At ambient pressure, we revise the previously proposed C2/c solution with a related but notably more stable P2 1 /c structure. Pressures below 8 GPa drive the formation of Ir-Ir dimers at both ambient and low temperatures, similar to the case of Li 2 IrO 3 . At higher pressures, the structural evolution dramatically depends on temperature. Furthermore, a large discontinuous reduction of the Ir honeycomb interplanar distance is observed around 15 GPa at room temperature, likely driven by a collapse of the O-Cu-O dumbbell bonds. At 15 K, pressures beyond 20 GPa first lead to an intermediate phase featuring a continuous reduction of the interplanar distance, which then collapses at 30 GPa across yet another phase transition. However, the resulting structure around 40 GPa is not the same at room and low temperatures. Remarkably, the reduction in interplanar distance leads to an apparent healing of the stacking faults at room temperature, but not at 15 K. Possible implications on the evolution of electronic structure of Cu 2 IrO 3 with pressure are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Comparative study of surface modification and D retention between beryllium and beryllides under high flux plasma exposure

The microstructures and deuterium (D) retention properties were investigated for beryllium intermetallic compounds (beryllides), such as Be 12 Ti and Be 12 V, compared to pure beryllium (Be), exposed to high density pure D and helium (He) mixed plasmas. TEM cross-sectional observations revealed the formation of cone structures on the Be surface exposed to the plasmas at a moderate temperature of 573 K. The crystal structure of the cones and the mass loss caused by the plasma exposure implied that the cone structures were generated by sputtering. The Ti or V surface enrichment was observed on both beryllides with no cone structures developed. TDS measurements indicated that He seeding to D plasma caused a ~ 4 times reduction of the D retention for both beryllides, while no reduction was observed for Be. As a result, the beryllide samples exposed to D + He mixture plasmas showed a lower total D retention than in Be.

Hydrogen retention↗
DOE OSTI2020

A predictive strain-gradient model with no undetermined constants or length scales

A general meso–scale (GM) crystal plasticity (CP) model was developed that accounts for lower-order (strain hardening) and higher-order (internal stress) effects of geometrically necessary dislocations (GNDs). It is predictive: no arbitrary parameters or length scales were invoked and no ad hoc numerical techniques were employed. It uses general stress field equations for GND content and a novel harmonization technique to enforce consistency of elastic long-range singular defect fields with applied elastic-plastic fields. The model facilitates implementation in commercial finite element programs without requiring special elements, special boundary conditions, or access to element shape functions. GM simulations confirmed, with improved accuracy, previously published predictions of the Hall-Petch effect, Bauschinger effect, and anelasticity. Previously unpredicted phenomena were also predicted: anelasticity and hysteresis for single Ta crystals and strain-hardening stagnation. The internal stresses (higher-order effect) dominate at large length scales, while at small length scales, the GND density hardening (lower-order effect) dominates. As a result, GM predicts that strain heterogeneity and consequent GND internal stresses are important factors in anelasticity.

36 MATERIALS SCIENCE↗
DOE OSTI2020

On hybrid scenarios in KSTAR

We report the status of hybrid scenario experiments in Korea Superconducting Tokamak Advanced Research (KSTAR). The hybrid scenario is defined as stationary discharges with ${\beta _{\rm{N}}}$ $ \geqslant $ 2.4 and ${H_{89}}$ $ \geqslant $ 2.0 at ${q_{95}}$ < 6.5 without or with very mild sawtooth activities in KSTAR. It is being developed towards reactor-relevant conditions. High performance of ${\beta _{\rm{N}}} \lesssim 3.0$, ${H_{89}} \lesssim 2.4$ and G-factor ($ \equiv {\beta _{\rm{N}}}{H_{89}}/q_{95}^2$) $ \lesssim 0.4$6 has been achieved and sustained for $ \gtrsim 40{{\tau }_{\text{E}}}$ at ne/nGW ~ 0.7 with heating power of $ \lesssim $5 MW. Some KSTAR hybrid discharges exhibit a unique feature of a slow transition from conventional H-mode to hybrid mode after the third neutral beam injection. The reason for the confinement enhancement is extensively studied in this transition period of a representative discharge exhibiting a common feature of KSTAR hybrid scenarios. 0D performance analysis with magnetohydrodynamic activities, 1D kinetic profile dynamics, power balance analysis, linear gyro-kinetic analysis and edge pedestal stability analysis were conducted. The enhancement is thought to be from both the core and the pedestal. The improvement in the core region of the ion energy channel is observed from the linear gyro-kinetic analysis considering the electromagnetic, the fast ion, the Shafranov shift, ${\it{\omega }_{E \times B}}$, and the magnetic shear effect. The electromagnetic finite $\beta $ stabilisation plays a role in the inner core region at ${\rho _{\rm{tor}}}\sim0.35$ together with the fast ion effect. The alpha stabilisation effect is also found at ${\rho _{\rm{tor}}}\sim0.5$. ${\omega _{E \times B}}$, which could reduce the linear growth of the ion temperature gradient mode in the outer core region at ${\rho _{\rm{tor}}}\sim0.5 - 0.7$ with the highest contribution from the toroidal rotation. Furthermore, regarding the improvement in the pedestal, Shafranov shift broadens the stability boundary of the pedestal in support of the diamagnetic effect. The pedestal height and width could be reproduced by the EPED model, while a realistic current profile is used to calculate the internal inductance for Shafranov shift. Based on these findings, a comprehensive confinement enhancement mechanism has been proposed by considering the core-edge interplay.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Possible Quantum Paramagnetism in Compressed Sr 2 IrO 4

The result of compression on the magnetic ground state of Sr 2 IrO 4 is studied with x-ray resonant techniques in the diamond anvil cell. The weak interlayer exchange coupling between square-planar 2D IrO 2 layers is easily modified upon compression, with a crossover between magnetic structures around 7 GPa mimicking the effect of an applied magnetic field at ambient pressure. Higher pressures drive an order-disorder magnetic phase transition with no magnetic order detected above 17–20 GPa. The persistence of strong exchange interactions between J eff = 1 / 2 magnetic moments within the insulating IrO 2 layers up to at least 35 GPa points to a highly frustrated magnetic state in compressed Sr 2 IrO 4 , opening the door for realization of novel quantum paramagnetic phases driven by extended 5 d orbitals with entangled spin and orbital degrees of freedom.

36 MATERIALS SCIENCE↗
DOE OSTI2016

First upper limits on the radar cross section of cosmic-ray induced extensive air showers

TARA (Telescope Array Radar) is a cosmic ray radar detection experiment colocated with Telescope Array, the conventional surface scintillation detector (SD) and fluorescence telescope detector (FD) near Delta, Utah, U.S.A. Furthermore, the TARA detector combines a 40 kW, 54.1 MHz VHF transmitter and high-gain transmitting antenna which broadcasts the radar carrier over the SD array and within the FD field of view, towards a 250 MS/s DAQ receiver. TARA has been collecting data since 2013 with the primary goal of observing the radar signatures of extensive air showers (EAS). Simulations indicate that echoes are expected to be short in duration (~10 µs) and exhibit rapidly changing frequency, with rates on the order 1 MHz/µs. The EAS radar cross-section (RCS) is currently unknown although it is the subject of over 70 years of speculation. One novel signal search technique is described in which the expected radar echo of a particular air shower is used as a matched filter template and compared to waveforms obtained by triggering the radar DAQ using the Telescope Array fluorescence detector. No evidence for the scattering of radio frequency radiation by EAS is obtained to date. Finally, we report the first quantitative RCS upper limits using EAS that triggered the Telescope Array Fluorescence Detector.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2016

Microstructural Characteristics of U-Zr Ingot Slug and Atomized Powder for SFR metal Fuel

Rod-type fuel slugs and spherical powder of U- 10wt.%Zr alloy was also fabricated and characterized in microstructure by injection casting, gravity casting and centrifugal atomization process. U grains became finer from ∼30μm in conventionally ingot rod to ∼2μm in atomized powder. Laminar structure became so fine from ∼0.2μm in conventionally cast ingot rod to 0.05∼0.1μm in atomized powder. Metallic fuels such as U-Zr and U-Pu-Zr alloys have been considered as a nuclear fuel for a sodium-cooled fast reactor (SFR), related to the closed fuel cycle for managing minor actinides and reducing a high radioactivity levels since the 1980's. Metallic fuel slugs of U-Pu-Zr alloys for SFR have conventionally been fabricated by an injection casting method. U-Pu-Zr alloy melts are injected and cast into quartz tube molds during injection casting. Metallic fuel slugs are collected by fracturing quartz tubes from the molds. Demolded quartz tubes are treated with radioactive wastes. Recently, management of minor actinides (MA) became an important issue because direct disposal of the long-lived MA can be a long-term burden for a tentative repository up to several hundreds of thousand years. The metallic fuel for SFR should be remotely fabricated under a radiation shielded environment such as a hot cell, because it contains highly radioactive MA such as Np, Am and Cm. The addition of MA in the fuel composition introduces new challenges in the manufacturing of a metallic fuel slug. Am has a high vapor pressure under a vacuum atmosphere at above a melting temperature of U-Zr or U-Pu-Zr. Used graphite crucibles and quartz molds cannot be recycled easily because of difficult decontamination of radioactive residues on their surfaces. It is necessary to minimize the vaporization of Am and volume of radioactive wastes. Atomized metallic fuel does not need these quartz molds during fabrication, as uranium alloys are prepared as a particle form. It is possible to reduce the formation of radioactive wastes by applying the fabrication process of a particulate metallic fuel. Metallic fuel having a fine microstructure, which originates from a rapid solidification effect during atomization process, results in a higher FG release rate during irradiation. In the case of applying a new forming method such as vibrocompaction in Zr sheath, the sheath can act as a reliable FCCI (fuel/cladding chemical interaction) barrier and a re-constraint for external elongation. In addition, atomized fuel powder, dispersed in a Na liquid metal having a high thermal conductivity, may have a lower temperature distribution during irradiation. In order to develop an efficient fabrication process of metallic fuel for SFR, U-Zr ingot rods were fabricated in a lab-scale with various casting methods. Rod-type U-Zr fuel slugs were fabricated by gravity casting and injection casting. Spherical powder of U-Zr alloy was also fabricated by centrifugal atomization. And then, the microstructural characteristics were investigated by using electron microscopes and energy-dispersive electron X-ray spectroscopy. Atomized U-10Zr powder generally showed spherical morphology of below 200 μm in particle size. U grains became finer from ∼30 μm in conventionally ingot rod to ∼2 μm in atomized powder. Laminar structure became so fine from ∼0.2 μm in conventionally cast ingot rod to 0.05∼0.1 μm in atomized powder. Atomized particulate metallic fuel for SFR has a fine microstructure, resulting in a higher fission gas release rate during irradiation. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2016

Measurement of effective sheath width around the cutoff probe based on electromagnetic simulation

We inferred the effective sheath width using the cutoff probe and incorporating a full-wave three-dimensional electromagnetic (EM) simulation. The EM simulation reproduced the experimentally obtained plasma-sheath resonance (PSR) on the microwave transmission (S{sub 21}) spectrum well. The PSR frequency has a one-to-one correspondence with the width of the vacuum layer assumed to be the effective sheath in the EM simulation model. The sheath width was estimated by matching the S{sub 21} spectra of the experiment and the EM simulation for different widths of the sheath. We found that the inferred sheath widths quantitatively and qualitatively agree with the sheath width measured by incorporating an equivalent circuit model. These results demonstrate the excellent potential of the cutoff probe for inferring the effective sheath width from its experimental spectrum data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Measurement of electron density using reactance cutoff probe

This paper proposes a new measurement method of electron density using the reactance spectrum of the plasma in the cutoff probe system instead of the transmission spectrum. The highly accurate reactance spectrum of the plasma-cutoff probe system, as expected from previous circuit simulations [Kim et al., Appl. Phys. Lett. 99, 131502 (2011)], was measured using the full two-port error correction and automatic port extension methods of the network analyzer. The electron density can be obtained from the analysis of the measured reactance spectrum, based on circuit modeling. According to the circuit simulation results, the reactance cutoff probe can measure the electron density more precisely than the previous cutoff probe at low densities or at higher pressure. The obtained results for the electron density are presented and discussed for a wide range of experimental conditions, and this method is compared with previous methods (a cutoff probe using the transmission spectrum and a single Langmuir probe).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

First model-independent Dalitz analysis of B 0 → DK* 0 , D→K$^{0}_{S}$π + π – decay

We report a measurement of the amplitude ratio r S of B 0 → D 0 K* 0 and B 0 → D 0 ¯K* 0 decays with a Dalitz analysis of D → K$^{0}_{S}$π + π – decays, for the first time using a model-independent method. We set an upper limit rS<0.87 at the 68\% confidence level, using the full data sample of 772×10 6 BB¯ pairs collected at the Υ(4S) resonance with the Belle detector at the KEKB e + e – collider. This result is obtained from observables x–= +0.4$^{+1.0+0.0}_{–0.6–0.1}$ ± 0.0, y– = –0.6$^{+0.8+0.1}_{–1.0–0.0}$ ± 0.1, x + = +0.1$^{+0.7+0.0}_{–0.4–0.1}$ ± 0.1 and y + = +0.3$^{+0.5+0.0}_{–0.8–0.1}$ ± 0.1, where x ± = r S cos(δ S ± Φ 3 ), y ± = r S sin(δ S ± Φ 3 ) and Φ 3 (δ S ) is the weak (strong) phase difference between B 0 → D 0 K* 0 and B 0 → D¯ 0 K* 0 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2016

Measurement and analysis of electron-neutral collision frequency in the calibrated cutoff probe

As collisions between electrons and neutral particles constitute one of the most representative physical phenomena in weakly ionized plasma, the electron-neutral (e-n) collision frequency is a very important plasma parameter as regards understanding the physics of this material. In this paper, we measured the e-n collision frequency in the plasma using a calibrated cutoff-probe. A highly accurate reactance spectrum of the plasma/cutoff-probe system, which is expected based on previous cutoff-probe circuit simulations [Kim et al., Appl. Phys. Lett. 99, 131502 (2011)], is obtained using the calibrated cutoff-probe method, and the e-n collision frequency is calculated based on the cutoff-probe circuit model together with the high-frequency conductance model. The measured e-n collision frequency (by the calibrated cutoff-probe method) is compared and analyzed with that obtained using a Langmuir probe, with the latter being calculated from the measured electron-energy distribution functions, in wide range of gas pressure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Study of B 0 → ρ + ρ – decays and implications for the CKM angle Φ 2

We present a measurement of the branching fraction and the longitudinal polarization fraction of B 0 → ρ + ρ – decays, as well as the time-dependent CP violating parameters in decays into longitudinally polarized ρ + ρ – pairs with Belle’s final data set of 772 × 10 6 BB¯ pairs, at the Υ(4S) resonance, collected at the asymmetric-energy e + e – collider KEKB. We obtain B(B 0 → ρ + ρ – ) = (28.3 ± 1.5(stat) ± 1.5(syst)) × 10 –6 , f L = 0.988 ± 0.012(stat) ± 0.023(syst), A CP = 0.00 ± 0.10(stat) ± 0.06(syst), S CP = –0.13 ± 0.15(stat) ± 0.05(syst). As a result, we perform an isospin analysis to constrain the Cabibbo-Kobayashi-Maskawa angle Φ 2 and obtain two solutions with Φ 2 = (93.7 ± 10.6)°, being most compatible with other Standard-Model based fits to the data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2016

Measurement of the decay B → D ℓ ν ℓ in fully reconstructed events and determination of the Cabibbo-Kobayashi-Maskawa matrix element | V c b |

We present a determination of the magnitude of the Cabibbo-Kobayashi-Maskawa matrix element |Vcb| using the decay B → Dℓν ℓ (ℓ = e,μ) based on 711 fb –1 of e + e – → Υ(4S) data recorded by the Belle detector and containing 772 × 10 6 BB¯ pairs. Here, one B meson in the event is fully reconstructed in a hadronic decay mode, while the other, on the signal side, is partially reconstructed from a charged lepton and either a D + or D 0 meson in a total of 23 hadronic decay modes. The isospin-averaged branching fraction of the decay B → Dℓν ℓ is found to be B(B 0 → D – ℓ + ν ℓ ) = (2.31 ± 0.03(stat) ± 0.11(syst))%. Analyzing the differential decay rate as a function of the hadronic recoil with the parametrization of Caprini, Lellouch, and Neubert and using the form-factor prediction G(1) = 1.0541 ± 0.0083 calculated by FNAL/MILC, we obtain η EW |V cb | = (40.12 ± 1.34) × 10 –3 , where ηEW is the electroweak correction factor. Alternatively, assuming the model-independent form-factor parametrization of Boyd, Grinstein, and Lebed and using lattice QCD data from the FNAL/MILC and HPQCD collaborations, we find η EW |V cb | = (41.10 ± 1.14) × 10 –3 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗