Engineering Papers⌕ Search

Engineering topics

Kim, Hyunseok

Publications and source records attributed to Kim, Hyunseok.

8 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Low-cost, high-efficiency III-V photovoltaics enabled by remote epitaxy through graphene (Final Technical Report)

One of the most important outcomes of this project was that the team developed a method to directly grow graphene layer in wafer-scale on III-V substrates. Conventionally, graphene had to be transferred for remote epitaxy, which has imposed significant challenges in scalability, film quality, and substrate recycling, due to the transfer-related issues. The newly developed method of directly forming 2D layers by Metal-Organic Chemical Vapor Deposition (MOCVD) has realized wafer-scale, defect-free graphene formation for remote epitaxy, which has huge implications not only for solar cells but also in expanding the scalability and the possibility for heterointegration with dissimilar material platforms. Another important outcome was on better understanding of remote epitaxy mechanism. The growth of III-V on graphene is vastly different from directly growing films on III-V substrates, because the surface energy of graphene is very small, meaning that the nucleation density on graphene will be much lower than exposed III-V surfaces. Also, the graphene and the interface properties critically affect remote interaction through graphene. With this obtained knowledge regarding III-V remote epitaxy, we were able to achieve wafer-scale single-crystalline remote epitaxy, 100% exfoliation of the remote epitaxial films, as well as multiple times of GaAs wafer reusability demonstration. The general rule of thumbs found during this project will be a stepping stone for the growth and fabrication of various high-performance devices by remote epitaxy. Lastly, because remote epitaxy and 2DLT offer a pathway to isolate single-crystal membranes from the host wafers, the wafer-scale remote epitaxy processes developed in this project could open up pathways for new functionality and multi-functionality by heterointegration of remote epitaxially formed membranes.

14 SOLAR ENERGY↗
DOE OSTI2023

Exceptional Thermochemical Stability of Graphene on N-Polar GaN for Remote Epitaxy

In this study, we investigate the thermochemical stability of graphene on the GaN substrate for metal–organic chemical vapor deposition (MOCVD)-based remote epitaxy. Despite excellent physical properties of GaN, making it a compelling choice for high-performance electronic and light-emitting device applications, the challenge of thermochemical decomposition of graphene on a GaN substrate at high temperatures has obstructed the achievement of remote homoepitaxy via MOCVD. Our research uncovers an unexpected stability of graphene on N-polar GaN, thereby enabling the MOCVD-based remote homoepitaxy of N-polar GaN. Our comparative analysis of N- and Ga-polar GaN substrates reveals markedly different outcomes: while a graphene/N-polar GaN substrate produces releasable microcrystals (μCs), a graphene/Ga-polar GaN substrate yields nonreleasable thin films. We attribute this discrepancy to the polarity-dependent thermochemical stability of graphene on the GaN substrate and its subsequent reaction with hydrogen. Evidence obtained from Raman spectroscopy, electron microscopic analyses, and overlayer delamination points to a pronounced thermochemical stability of graphene on N-polar GaN during MOCVD-based remote homoepitaxy. Molecular dynamics simulations, corroborated by experimental data, further substantiate that the thermochemical stability of graphene is reliant on the polarity of GaN, due to different reactions with hydrogen at high temperatures. In conclusion, based on the N-polar remote homoepitaxy of μCs, the practical application of our findings was demonstrated in fabrication of flexible light-emitting diodes composed of p–n junction μCs with InGaN heterostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

High-throughput manufacturing of epitaxial membranes from a single wafer by 2D materials-based layer transfer process

Layer transfer techniques have been extensively explored for semiconductor device fabrication as a path to reduce costs and to form heterogeneously integrated devices. These techniques entail isolating epitaxial layers from an expensive donor wafer to form freestanding membranes. However, current layer transfer processes are still low-throughput and too expensive to be commercially suitable. Here we report a high-throughput layer transfer technique that can produce multiple compound semiconductor membranes from a single wafer. We directly grow two-dimensional (2D) materials on III–N and III–V substrates using epitaxy tools, which enables a scheme comprised of multiple alternating layers of 2D materials and epilayers that can be formed by a single growth run. Each epilayer in the multistack structure is then harvested by layer-by-layer mechanical exfoliation, producing multiple freestanding membranes from a single wafer without involving time-consuming processes such as sacrificial layer etching or wafer polishing. Moreover, atomic-precision exfoliation at the 2D interface allows for the recycling of the wafers for subsequent membrane production, with the potential for greatly reducing the manufacturing cost.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Vertical full-colour micro-LEDs via 2D materials-based layer transfer

Micro-LEDs (µLEDs) have been explored for augmented and virtual reality display applications that require extremely high pixels per inch and luminance. However, conventional manufacturing processes based on the lateral assembly of red, green and blue (RGB) µLEDs have limitations in enhancing pixel density. Recent demonstrations of vertical µLED displays have attempted to address this issue by stacking freestanding RGB LED membranes and fabricating top-down, but minimization of the lateral dimensions of stacked µLEDs has been difficult. Here we report full-colour, vertically stacked µLEDs that achieve, to our knowledge, the highest array density (5,100 pixels per inch) and the smallest size (4 µm) reported to date. This is enabled by a two-dimensional materials-based layer transfer technique that allows the growth of RGB LEDs of near-submicron thickness on two-dimensional material-coated substrates via remote or van der Waals epitaxy, mechanical release and stacking of LEDs, followed by top-down fabrication. The smallest-ever stack height of around 9 µm is the key enabler for record high µLED array density. We also demonstrate vertical integration of blue µLEDs with silicon membrane transistors for active matrix operation. Furthermore, these results establish routes to creating full-colour µLED displays for augmented and virtual reality, while also offering a generalizable platform for broader classes of three-dimensional integrated devices.

42 ENGINEERING↗
DOE OSTI2022

Graphene Nanopattern for Single-Crystal Film Growth, Defect Reduction and Layer Transfer

Thin film heterostructures are key building blocks for advanced electronic and optoelectronic devices. For this, direct heteroepitaxy has been pursued for decades, although it has been challenging to reduce crystal defects stemming from lattice mismatches and thermal mismatches between materials. The layer transfer method has been proposed as an alternative approach, wherein dissimilar materials are separately grown and then hetero-integrated. However, the applicability of layer transfer techniques is limited by several technical challenges, such as controllability, throughput, and damage to the substrate. Remote epitaxy, which is a recently developed method to produce single-crystalline membranes, is a promising approach but cannot be applied to elemental materials such as Si and Ge. In this work, we report graphene nanopattern as a universal template for the growth of single-crystal thin films that can be exfoliated as a freestanding form. This is realized by the chemical inertness of graphene, which allows selective nucleation at the exposed region, followed by lateral overgrowth onto graphene to form a planarized thin film. By employing graphene nanopattern, both group IV and III-V materials are utilized as the substrate as well as the epilayer. The epilayer can be exfoliated at the graphene interface because partially covered graphene effectively weakens the interface, which is corroborated by theoretical analyses of spalling theory. We reveal that graphene nanopattern not only works as a weakened interface for exfoliation, but also allows for dislocation reduction in heteroepitaxial films. This is because of the flexibility and the dangling-bond-free nature of graphene, which provides an additional path for strain relaxation. Therefore, these results represent a meaningful step toward production of high-quality single-crystal membranes that can be hetero-integrated.

Kim, Hyunseok↗
DOE OSTI2022

Graphene Nanopattern for Single-Crystal Film Growth, Defect Reduction and Layer Transfer

Thin film heterostructures are key building blocks for advanced electronic and optoelectronic devices. For this, direct heteroepitaxy has been pursued for decades, although it has been challenging to reduce crystal defects stemming from lattice mismatches and thermal mismatches between materials. The layer transfer method has been proposed as an alternative approach, wherein dissimilar materials are separately grown and then hetero-integrated. However, the applicability of layer transfer techniques is limited by several technical challenges, such as controllability, throughput, and damage to the substrate. Remote epitaxy, which is a recently developed method to produce single-crystalline membranes, is a promising approach but cannot be applied to elemental materials such as Si and Ge. In this work, we report graphene nanopattern as a universal template for the growth of single-crystal thin films that can be exfoliated as a freestanding form. This is realized by the chemical inertness of graphene, which allows selective nucleation at the exposed region, followed by lateral overgrowth onto graphene to form a planarized thin film. By employing graphene nanopattern, both group IV and III-V materials are utilized as the substrate as well as the epilayer. The epilayer can be exfoliated at the graphene interface because partially covered graphene effectively weakens the interface, which is corroborated by theoretical analyses of spalling theory. We reveal that graphene nanopattern not only works as a weakened interface for exfoliation, but also allows for dislocation reduction in heteroepitaxial films. This is because of the flexibility and the dangling-bond-free nature of graphene, which provides an additional path for strain relaxation. Therefore, these results represent a meaningful step toward production of high-quality single-crystal membranes that can be hetero-integrated.

Kim, Hyunseok↗