Engineering Papers⌕ Search

Engineering topics

Kim, A.

Publications and source records attributed to Kim, A..

119 records · Page 7

Branching Ratio of the Electromagnetic Decay of the Σ + (1385)

The CLAS detector was used to obtain the first ever measurement of the electromagnetic decay of the Σ* + (1385) from the reaction γp → K 0 Σ* + (1385). A real photon beam with a maximum energy of 3.8 GeV was incident on a liquid-hydrogen target, resulting in the photoproduction of the kaon and Σ* hyperon. Kinematic fitting was used to separate the reaction channel from the background processes. The fitting algorithm exploited a new method to kinematically fit neutrons in the CLAS detector, leading to the partial width measurement of 250.0 ± 56.9(stat) -41.2 +34.3 (sys) keV. A U-spin symmetry test using the SU(3) flavor-multiplet representation yields predictions for the Σ* + (1385) → Σ + γ and Σ* 0 (1385) → Λγ partial widths that agree with the experimental measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Upper limits for the photoproduction cross section for the Φ⁻⁻(1860) pentaquark state off the deuteron

We searched for the Φ⁻⁻(1860) pentaquark in the photoproduction process off the deuteron in the Ξ⁻π⁻-decay channel using CLAS. The invariant-mass spectrum of the Ξ⁻π⁻ system does not indicate any statistically significant enhancement near the reported mass M=1.860 GeV. The statistical analysis of the sideband-subtracted mass spectrum yields a 90%-confidence-level upper limit of 0.7 nb for the photoproduction cross section of Φ⁻⁻(1860) with a consecutive decay intoΞ⁻π⁻ in the photon-energy range 4.5GeV γ <5.5GeV.

Egiyan, H.↗

Measurement of the nuclear multiplicity ratio or image hadronization K 0 s at CLAS

The influence of cold nuclear matter on lepto-production of hadrons in semi-inclusive deep inelastic scattering is measured using the CLAS detector in Hall B at Jefferson Lab and a 5.014 GeV electron beam. We report the K 0 s multiplicity ratios for targets of C, Fe, and Pb relative to deuterium as a function of the fractional virtual photon energy z transferred to the K 0 s and the transverse momentum squared p 2 T of the K 0 s . We find that the multiplicity ratios for K 0 s are reduced in the nuclear medium at high z and low p 2 T , with a trend for the K 0 s transverse momentum to be broadened in the nucleus for large p 2 T .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Precise Measurements of Beam Spin Asymmetries in Semi-Inclusive π 0 production

We present studies of single-spin asymmetries for neutral pion electroproduction in semi-inclusive deep-inelastic scattering of 5.776 GeV polarized electrons from an unpolarized hydrogen target, using the CEBAF Large Acceptance Spectrometer (CLAS) at the Thomas Jefferson National Accelerator Facility. A substantial sin Φ h amplitude has been measured in the distribution of the cross section asymmetry as a function of the azimuthal angle Φ h of the produced neutral pion. The dependence of this amplitude on Bjorken x and on the pion transverse momentum is extracted with significantly higher precision than previous data and is compared to model calculations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Coherent photoproduction of {pi}{sup +} from {sup 3}He

We have measured the differential cross section for the {gamma}{sup 3}He{yields}{pi}{sup +}t reaction. This reaction was studied using the Continuous Electron Beam Accelerator Facility (CEBAF) Large Acceptance Spectrometer (CLAS) at Jefferson Lab. Real photons produced with the Hall-B bremsstrahlung tagging system in the energy range from 0.50 to 1.55 GeV were incident on a cryogenic liquid {sup 3}He target. The differential cross sections for the {gamma}{sup 3}He{yields}{pi}{sup +}t reaction were measured as a function of photon-beam energy and pion-scattering angle. Theoretical predictions to date cannot explain the large cross sections except at backward angles, showing that additional components must be added to the model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Near-threshold photoproduction of Φ mesons from deuterium

In this report, we measure the differential cross section on $\phi$-meson photoproduction from deuterium near the production threshold for a proton using the CLAS detector and a tagged-photon beam in Hall B at Jefferson Lab. The measurement was carried out by a triple coincidence detection of a proton, $K^+$ and $K^-$ near the theoretical production threshold of 1.57 GeV. Moreover, the extracted differential cross sections $\frac{d\sigma}{dt}$ for the initial photon energy from 1.65-1.75 GeV are consistent with predictions based on a quasifree mechanism. Ultimately, this experiment establishes a baseline for a future experimental search for an exotic $\phi$-N bound state from heavier nuclear targets utilizing subthreshold/near-threshold production of $\phi$ mesons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Differential cross sections and recoil polarizations for the reaction {gamma}p{yields}K{sup +{Sigma}0}

High-statistics measurements of differential cross sections and recoil polarizations for the reaction {gamma}p{yields}K{sup +{Sigma}0} have been obtained using the CLAS detector at Jefferson Lab. We cover center-of-mass energies ({radical}(s)) from 1.69 to 2.84 GeV, with an extensive coverage in the K{sup +} production angle. Independent measurements were made using the K{sup +}p{pi}{sup -}({gamma}) and K{sup +}p({pi}{sup -},{gamma}) final-state topologies, and were found to exhibit good agreement. Our differential cross sections show good agreement with earlier CLAS, SAPHIR, and LEPS results, while offering better statistical precision and a 300-MeV increase in {radical}(s) coverage. Above {radical}(s){approx_equal}2.5 GeV, t- and u-channel Regge scaling behavior can be seen at forward and backward angles, respectively. Our recoil polarization (P{sub {Sigma}}) measurements represent a substantial increase in kinematic coverage and enhanced precision over previous world data. At forward angles, we find that P{sub {Sigma}}is of the same order of magnitude but opposite sign as P{sub {Lambda},} in agreement with the static SU(6) quark model prediction of P{sub {Sigma}{approx_equal}-}P{sub {Lambda}.} This expectation is violated in some mid- and backward-angle kinematic regimes, where P{sub {Sigma}}and P{sub {Lambda}}are of similar magnitudes but also have the same signs. In conjunction with several other meson photoproduction results recently published by CLAS, the present data will help constrain the partial-wave analyses being performed to search for missing baryon resonances.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

An energy analysis of crack-initiation and arrest in epoxy

The objective of this work is to study fracture processes such as crack initiation and arrest in epoxy. A compact tension specimen with displacement-controlled loading is employed to observe multiple crack initiations and arrests. The energy release rate at crack initiation is significantly higher than that at crack arrest, as has been observed elsewhere. In this study, the difference between these energy release rates is found to depend on specimen size (scale effect), and is quantitatively related to the fracture surface morphology. The scale effect, similar to that in strength theory, is conventionally attributed to the statistics of defects which control the fracture process. Triangular shaped ripples, deltoids, are formed on the fracture surface of the epoxy during the slow sub-critical crack growth, prior to the smooth mirrorlike surface characteristic of fast cracks. The deltoids are complimentary on the two crack faces which excludes any inelastic deformation from consideration. The deltoids are analogous to the ripples created on a river surface downstream from a small obstacle. However, in spite of the expectation based on this analogy and the observed scale effect, there are no 'defects' at the apex of the deltoids detectable down to the 0.1 micron level. This suggests that the formation of deltoids during the slow process of subcritical crack growth is an intrinsic feature of the fracture process itself, triggered by inhomogeneity of material on a submicron scale. This inhomogeneity may be related to a fluctuation in the cross-link density of the epoxy.

Chudnovsky, A.↗

Probability of brittle failure

A methodology was developed for collecting statistically representative data for crack initiation and arrest from small number of test specimens. An epoxy (based on bisphenol A diglycidyl ether and polyglycol extended diglycyl ether and cured with diethylene triamine) is selected as a model material. A compact tension specimen with displacement controlled loading is used to observe multiple crack initiation and arrests. The energy release rate at crack initiation is significantly higher than that at a crack arrest, as has been observed elsewhere. The difference between these energy release rates is found to depend on specimen size (scale effect), and is quantitatively related to the fracture surface morphology. The scale effect, similar to that in statistical strength theory, is usually attributed to the statistics of defects which control the fracture process. Triangular shaped ripples (deltoids) are formed on the fracture surface during the slow subcritical crack growth, prior to the smooth mirror-like surface characteristic of fast cracks. The deltoids are complementary on the two crack faces which excludes any inelastic deformation from consideration. Presence of defects is also suggested by the observed scale effect. However, there are no defects at the deltoid apexes detectable down to the 0.1 micron level.

Kim, A.↗