Engineering Papers⌕ Search

Engineering topics

Kiefling, L.

Publications and source records attributed to Kiefling, L..

10 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Improved turbopump dynamics

A study was initiated to investigate the practicality of increasing rotor critical speeds by changes in manufacturing method. The technique would be to build a pump with an all laser welded shaft and case; such unit to be opened by laser cutting and rebuilt by rewelding the same surface. Use of a split casing, common in industry, would permit assembly of the rotor outside the case. A team was formed to perform the study; however, the work of the team was severely restricted by conflict with higher priority tasks. No manpower was available to evaluate alternate configurations. Thus, much of the synergetic effects of cohesive design modification was lost. Although very limited results were achieved, nothing was found to indicate that the method is not worth further investigation.

Kiefling, L.↗
NASA NTRS1985

Technical overview structural dynamics

Structural dynamics technology development in support of SSME was initiated in November 1980. The objective identified was to develop improved understanding of the operating dynamic characteristics of high-performance liquid rocket systems in order to: increase lifetime and performance; decrease weight; identify incipient failures; meet deflection requirements; decrease costs; predict effect of imposed changes; and determine changes to meet specified requirements. A series of tasks was identified and work was started on the most urgent tasks. In 1983, the program was made into a joint program with NASA-Lewis Research Center.

Kiefling, L.↗
NASA NTRS1981

Space Shuttle main engine nozzle-steerhorn dynamics

On two occasions during the Space Shuttle main engine development, the LH2 feedline (called the steerhorn, because of its shape) failed during the cutoff transient. A dynamic test was undertaken, and an analytical model was developed and correlated to the dynamic test. Detailed models of the tube bundle were required to obtain the equivalent shell coefficients. All-shell models of the nozzle wall were found better than beam-shell models. The most difficult part of the structure to simulate was the felt-metal pad between the feedline and its mount, which introduced nonlinear stiffness and damping and led to the use of separate low amplitude and high amplitude models. The total structure was found to have 400 modes in the frequency range of interest, 0 to 500 Hz. Good test analysis correlation was obtained and a modified feedline configuration was found to demonstrate a 40% reduction of response stress from the original configuration.

Kiefling, L.↗
NASA NTRS1977

SPAR: Structural-performance analysis and redesign

System of processor programs performs stress, buckling, and vibrational analysis of large linear finite element systems in excess of 50,000 degrees of freedom, while minimizing processing cost, execution time, central memory storage, and secondary data storage requirements. Programs use sparse matrix solution techniques and other computational and data management procedures.

Whetstone, W. D.↗
NASA NTRS1974

Fluid-structure finite-element vibrational analysis

A fluid finite element has been developed for a quasi-compressible fluid. Both kinetic and potential energy are expressed as functions of nodal displacements. Thus, the formulation is similar to that used for structural elements, with the only differences being that the fluid can possess gravitational potential, and the constitutive equations for fluid contain no shear coefficients. Using this approach, structural and fluid elements can be used interchangeably in existing efficient sparse-matrix structural computer programs such as SPAR. The theoretical development of the element formulations and the relationships of the local and global coordinates are shown. Solutions of fluid slosh, liquid compressibility, and coupled fluid-shell oscillation problems which were completed using a temporary digital computer program are shown. The frequency correlation of the solutions with classical theory is excellent.

Feng, G. C.↗
NASA NTRS1972

Snap dynamics

Computer program calculates normal vibration modes of complex structures elimating excessively large amounts of input data, run time, and core storage. Provision for accuracy improvement is also included.

Kiefling, L.↗
NASA NTRS1972

Methods and application of system identification in shock and vibration.

A logical picture is presented of current useful system identification techniques in the shock and vibration field. A technology tree diagram is developed for the purpose of organizing and categorizing the widely varying approaches according to the fundamental nature of each. Specific examples of accomplished activity for each identification category are noted and discussed. To provide greater insight into the most current trends in the system identification field, a somewhat detailed description is presented of the essential features of a recently developed technique that is based on making the maximum use of all statistically known information about a system.

Collins, J. D.↗