Development of a Direct Fabrication Technique for Full-Shell X-Ray Optics
No abstract available
Full-shell x-ray optics↗
Engineering topics
Kester, Thomas J.
Publications and source records attributed to Kester, Thomas J..
A Stainless-Steel Mandrel for Slumping Glass X-ray Mirrors
We have fabricated a precision full-cylinder stainless-steel mandrel at Marshall Space Flight Center. The mandrel is figured for a 30-cm diameter primary (paraboloid) mirror of an 840-cm focal-length Wolter-1 telescope. We have developed this mandrel for experiments in slumping.thermal forming at about 600 C.of glass mirror segments at Goddard Space Flight Center, in support of NASA's participation in the International X-ray Observatory (IXO). Precision turning of stainless-steel mandrels may offer a low-cost alternative to conventional figuring of fused-silica or other glassy forming mandrels. We report on the fabrication, metrology, and performance of this first mandrel; then we discuss plans and goals for stainless-steel mandrel technology.
Gubarev, Mikhail V.↗
A Stainless-Steel Mandrel for Slumping Glass X-Ray Mirrors
We have fabricated a precision full -cylinder stainless-steel mandrel at Marshall Space Flight Center. The mandrel is figured for a 30-cm-diameter primary (paraboloid) mirror of an 840-cm focal-lengthWolter-1 telescope. We have developed this mandrel for experiments in slumping.thermal forming at about 600 C-of glass mirror segments at Goddard Space Flight Center, in support of NASA fs participation in the International X -ray Observatory (IXO). Precision turning of stainless ]steel mandrels may offer a lowcost alternative to conventional figuring of fused -silica or other glassy forming mandrels. We report on the fabrication, metrology, and performance of this first mandrel; then we discuss plans and goals for stainless-steel mandrel technology.
ODell, Stephen L.↗
Poco Graphite Mirror Metrology Report
Recently a lightweight mirror technology was tested at Marshall Space Flight Center's Space Optic Manufacturing Technology Center (MSFC, SOMTC). The mirror is a Poco Graphite CVD Si clad SiC substrate. It was tested for cryogenic (cryo) survivability to 20deg Kelvin in SOMTC's X-ray Calibration and Cryogenic Test Facility. The surface figure of the mirror was measured before and after cry0 cycling. The test technique and results are discussed.
Kester, Thomas J.↗
Metrology of Optical Beam Expander for Space Readiness Coherent Lidar Experiment (SPARCLE)
Stringent requirements of the SPARCLE telescope demanded testing of its individual elements through each step of fabrication, and complete metrology of the integrated telescope both at Helium-Neon and the operational two micron wavelengths.
Kester, Thomas J.↗