Engineering Papers⌕ Search

Engineering topics

Kerner, Ross A.

Publications and source records attributed to Kerner, Ross A..

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Reverse-Bias Resilience of Monolithic Perovskite/Silicon Tandem Solar Cells

Metal halide perovskites have rapidly enabled a range of high-performance photovoltaic technologies. However, catastrophic failure under reverse voltage bias hinders their commercialization. In this work, we demonstrate that by employing a monolithic perovskite/silicon tandem structure, the perovskite subcell can be effectively protected by the silicon subcell under reverse bias, owing to the low reverse-bias diode current of the silicon subcell. As a result, the tested perovskite/silicon tandem devices show superior reverse-bias resilience compared to perovskite single-junction devices in both long-term reverse voltage biasing tests at the single-cell level and partial shading tests at the module level. These results highlight that, compared to other perovskite technologies, monolithic perovskite/silicon tandems are at a higher technology readiness level in terms of tackling the reverse-bias and partial shading challenge, which is a considerable advantage towards commercialization.

commercialization↗
DOE OSTI2024

In situ formation of pseudohalide anions induced by humid air and light passivates formamidinium‐based halide perovskites

Abstract Metal halide perovskites based on formamidinium (FA), or FA‐rich compositions have shown great promise for high‐performance photovoltaics. A deeper understanding of the impact of ambient conditions (e.g., moisture, oxygen, and illumination) on the possible reactions of FA‐based perovskite films and their processing sensitivities has become critical for further advances toward commercialization. Herein, we investigate reactions that take place on the surface of the FA 0.7 Cs 0.3 , mixed Br/I wide bandgap perovskite thin films in the presence of humid air and ambient illumination. The treatment forms a surface layer containing O, OH, and N‐based anions. We propose the latter originates from formamidine trapped at the perovskite/oxide interface reacting further to cyanide and/or formamidinate—an understudied class of pseudohalides that bind to Pb. Optimized treatment conditions improve photoluminescence quantum yield owing to both reduced surface recombination velocity and increased bulk carrier lifetime. The corresponding perovskite solar cells also exhibit improved performance. Identifying these reactions opens possibilities for better utilizing cyanide and amidinate ligands, species that may be expected during vapor processing of FA‐based perovskites. Our work also provides new insights into the self‐healing or self‐passivating of MA‐free perovskite compositions where FA and iodide damage could be partially offset by advantageous reaction byproducts. image

14 SOLAR ENERGY↗
DOE OSTI2024

Beyond Ion Migration in Metal Halide Perovskites: Toward a Broader Photoelectrochemistry Perspective

Ion migration is a broad term used to account for the degradation of halide perovskite materials and devices. However, ion mobility is only one piece of the full picture-mobile ions/defects are first created, then transported, and eventually annihilated or immobilized. In this Perspective, we summarize emerging work that shows how tractable photochemical and Faradaic reactions provide a continuous source of ions to migrate. Furthermore, we discuss strategies to fundamentally manipulate ion migration by targeting specific electrochemical and reduction/oxidation mechanisms. This highlights the important role of defect photoelectrochemistry, as well as the soft nature of the perovskite lattice, in ion migration and self-healing. We conclude that distinguishing more detailed processes involved in “ion migration”, with an emerging focus on the reactions that form mobile ionic defects, is necessary to greatly improve the stability of devices and open up more technological applications.

defects↗
DOE OSTI2024

Sustainability pathways for perovskite photovoltaics

Solar energy is the fastest-growing source of electricity generation globally. As deployment increases, photovoltaic (PV) panels need to be produced sustainably. Therefore, the resource utilization rate and the rate at which those resources become available in the environment must be in equilibrium while maintaining the well-being of people and nature. Metal halide perovskite (MHP) semiconductors could revolutionize PV technology due to high efficiency, readily available/accessible materials and low-cost production. Here we outline how MHP-PV panels could scale a sustainable supply chain while appreciably contributing to a global renewable energy transition. Further, we evaluate the critical material concerns, embodied energy, carbon impacts and circular supply chain processes of MHP-PVs. The research community is in an influential position to prioritize research efforts in reliability, recycling and remanufacturing to make MHP-PVs one of the most sustainable energy sources on the market.

14 SOLAR ENERGY↗
DOE OSTI2023

Towards linking lab and field lifetimes of perovskite solar cells

Metal halide perovskite solar cells (PSCs) represent a promising low-cost, thin-film photovoltaic (PV) technology, with unprecedented power conversion efficiencies (PCEs) obtained for both single-junction and tandem applications. To push PSCs toward commercialization, it is critical, albeit challenging, to understand device reliability under real-world outdoor conditions where multiple stress factors (e.g., light, heat, humidity) coexist, generating complicated degradation behaviors. It is necessary to identify accelerated indoor testing protocols - which can correlate specific stressors with observed degradation modes in fielded devices - to quickly guide PSC development. Here, we use a state-of-the-art p-i-n PSC stack (with PCE up to ~25.5%) to show that indoor accelerated stability tests can predict our 6-month outdoor aging tests. Device degradation rates under illumination and at elevated temperatures are most instructive for understanding outdoor device reliability. Further, we also find that the indium tin oxide (ITO)/self-assembled monolayer (SAM)-based hole transport layer (HTL)/perovskite interface most strongly affects our device operation stability. Improving the ion-blocking properties of the SAM HTL increases averaged device operational stability at 50 degree C-85 °C by a factor of ~2.8, reaching over 1000 h at 85 °C and to near 8200 h at 50 °C with a projected 20% degradation, which is among the best to date for high-efficiency p-i-n PSCs.

14 SOLAR ENERGY↗
DOE OSTI2023

Reverse-Bias Resilience of Monolithic Perovskite/Silicon Tandem Solar Cells

Metal halide perovskites have rapidly enabled a range of high-performance photovoltaic technologies. However, catastrophic failure under reverse voltage bias poses a roadblock for their commercialization. In this work, we conduct a series of stress tests to compare the reverse-bias stability of perovskite single-junction, silicon single-junction, and monolithic perovskite/silicon tandem solar cells. We demonstrate that the tested perovskite/silicon tandem devices are considerably more resilient against reverse bias compared with perovskite single-junction devices. The origin of such improved stability stems from the low reverse-bias diode current of the silicon subcell. This translates to dropping most of the voltage over the silicon subcell, where such a favorable voltage distribution protects the perovskite subcell from reverse-bias-induced degradation. These results highlight that, compared with other perovskite technologies, monolithic perovskite/silicon tandems are at a higher technology readiness level in terms of tackling the reverse bias and partial shading challenges, which is a considerable advantage toward commercialization.

halide perovskite↗
DOE OSTI2023

Electrochemical Doping of Halide Perovskites by Noble Metal Interstitial Cations

Abstract Metal halide perovskites are an attractive class of semiconductors, but it has proven difficult to control their electronic doping by conventional strategies due to screening and compensation by mobile ions or ionic defects. Noble‐metal interstitials represent an under‐studied class of extrinsic defects that plausibly influence many perovskite‐based devices. In this work, doping of metal halide perovskites is studied by electrochemically formed Au + interstitial ions, combining experimental data on devices with a computational analysis of Au + interstitial defects based on density functional theory (DFT). Analysis suggests that Au + cations can be easily formed and migrate through the perovskite bulk via the same sites as iodine interstitials (I i + ). However, whereas I i + compensates n‐type doping by electron capture, the noble‐metal interstitials act as quasi‐stable n‐dopants. Experimentally, voltage‐dependent, dynamic doping by current density–time ( J–t ), electrochemical impedance, and photoluminescence measurements are characterized. These results provide deeper insight into the potential beneficial and detrimental impacts of metal electrode reactions on long‐term performance of perovskite photovoltaic and light‐emitting diodes, as well as offer an alternative doping explanation for the valence switching mechanism of halide‐perovskite‐based neuromorphic and memristive devices.

14 SOLAR ENERGY↗
DOE OSTI2023

Origins of Photoluminescence Instabilities at Halide Perovskite/Organic Hole Transport Layer Interfaces

Metal halide perovskites are promising for optoelectronic device applications; however, their poor stability under solar illumination remains a primary concern. While the intrinsic photostability of isolated neat perovskite samples has been widely discussed, it is important to explore how charge transport layers—employed in most devices—impact photostability. Here, in this paper, we study the effect of organic hole transport layers (HTLs) on light-induced halide segregation and photoluminescence (PL) quenching at perovskite/organic HTL interfaces. By employing a series of organic HTLs, we demonstrate that the HTL’s highest occupied molecular orbital energy dictates behavior; furthermore, we reveal the key role of halogen loss from the perovskite and subsequent permeation into organic HTLs, where it acts as a PL quencher at the interface and introduces additional mass transport pathways to facilitate halide phase separation. In doing so, we both reveal the microscopic mechanism of non-radiative recombination at perovskite/organic HTL interfaces and detail the chemical rationale for closely matching the perovskite/organic HTL energetics to maximize solar cell efficiency and stability.

14 SOLAR ENERGY↗
DOE OSTI2022

Halogen Redox Shuttle Explains Voltage-Induced Halide Redistribution in Mixed-Halide Perovskite Devices

Voltage-induced halide segregation greatly limits the optoelectronic applications of mixed-halide perovskite devices, but a mechanistic explanation behind this phenomenon remains unclear. In this work, we use electron microscopy and elemental mapping to directly measure the halide redistribution in mixed-halide perovskite solar cells with quasi-ion-impermeable contact layers under different bias polarities to find iodide and bromide accumulation at the cathode and anode, respectively. This is consistent with a mechanism based on preferential iodide oxidation at the anode, leading to unbalanced I$^{+}_{i}$, I$^{-}_{X}$, and Br$^{-}_{X}$ fluxes. Importantly, switching the anode from "inert" Au to "active" Ag prevents segregation because Ag oxidation precludes the oxidation of lattice iodide, which suggests employing redox-active additives as a general strategy to suppress halide segregation. Finally, these results show that halide perovskite devices operate as solid-state electrochemical cells when threshold voltages are exceeded, providing fresh insight to understand the impacts of voltage bias on halide perovskite devices.

14 SOLAR ENERGY↗
DOE OSTI2022

Surface reaction for efficient and stable inverted perovskite solar cells

We report perovskite solar cells (PSCs) with an inverted structure (often referred to as the p-i-n architecture) are attractive for future commercialization due to their easily scalable fabrication, reliable operation, and compatibility with a wide range of perovskite-based tandem device architectures. However, the power conversion efficiency (PCE) of p-i-n PSCs falls behind n-i-p (or normal) structure counterparts. This large performance gap could undermine efforts to adopt p-i-n architectures, despite their other advantages. Given the remarkable advances in perovskite bulk materials optimization over the past decade, interface engineering has become the most important strategy to push PSC performance to its limit. Here, we report a reactive surface engineering approach based on a simple post-growth treatment of 3-(Aminomethyl)pyridine (3-APy) on top of a perovskite thin film. First, the 3-APy molecule selectively reacts with surface FA+, reducing perovskite surface roughness and surface potential fluctuations associated with surface steps/terraces. Second, the reaction product on the perovskite surface decreases the formation energy of charged iodine-vacancies, leading to effective n-type doping with a reduced work function in the surface region. With this reactive surface engineering, the resulting p-i-n PSCs obtained a PCE over 25%, along with retaining 87% of the initial PCE after over 2400 h of one-sun operation at about 55 degrees C in air.

14 SOLAR ENERGY↗
DOE OSTI2022

Iodine Electrochemistry Dictates Voltage‐Induced Halide Segregation Thresholds in Mixed‐Halide Perovskite Devices

Abstract Owing to straightforward stoichiometry–bandgap tunability, mixed‐halide perovskites are ideal for many optoelectronic devices. However, unwanted halide segregation under operational conditions, including light illumination and voltage bias, restricts practical use. Additionally, the origin of voltage‐induced halide segregation is still unclear. Herein, a systematic voltage threshold study in mixed bromide/iodide perovskite devices is performed and leads to observation of three distinct voltage thresholds corresponding to the doping of the hole transport material (0.7 ± 0.1 V), halide segregation (0.95 ± 0.05 V), and degradation (1.15 ± 0.05 V) for an optically stable mixed‐halide perovskite composition with a low bromide content (10%). These empirical threshold voltages are minimally affected by composition until very Br‐rich compositions, which reveals the dominant role of iodide/triiodide/iodine electrochemistry in voltage‐induced Br/I phase separation and transport layer doping reactions in halide perovskite devices.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Organoammonium-Ion-based Perovskites Can Degrade to Pb 0 via Amine–Pb(II) Coordination

The degradation of alkylammonium Pb II halide perovskites, in the dark and upon irradiation near room temperature, involves coordinated amine as the dominant reducing agent to yield Pb o near room temperature, as determined by X-ray photoelectron spectroscopy (XPS). The reduction of Pb II first involves amine coordination, supported by 207 Pb nuclear magnetic resonance (NMR) analysis. It is shown that a Pb II –amide complex is the immediate precursor of Pb II reduction. Its oxidized counterpart, the imine, is formed and is characterized by NMR and gas chromatography–mass spectrometry. Here, the “redox” process requires a β-C–H bond of the alkylamine. Amine species devoid of this moiety do not similarly reduce Pb II to Pb o . The conversion of an alkylammonium moiety to the Pb II –amide is proposed to occur through a sequence of photoassisted proton-transfer reactions to a lead-coordinated ligand, which is substantiated through XPS-observed Pb II reduction in a family of lead bromide/iodide 2D perovskites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Incorporating Electrochemical Halide Oxidation into Drift-Diffusion Models to Explain Performance Losses in Perovskite Solar Cells under Prolonged Reverse Bias

Partial shading of a solar module can induce a set of cells within the module to operate under reverse bias. Studies have shown that metal halide perovskite solar cells with a wide variety of compositions and contacts exhibit interesting behavior in reverse bias that includes both reversible performance loss and non-reversible degradation. In this paper, an advanced drift-diffusion approach incorporating an electrochemical term to explain the short-circuit, open circuit and fill factor losses that are experimentally measured after prolonged reverse bias is used. It is shown that holes can tunnel into the perovskite due to sharp band bending near the contact, accumulate within the bulk of the perovskite absorber, and trigger the oxidation of halides to form neutral halogens. The density of neutral halogens is much higher in reverse bias because there are hardly any electrons available to reduce the iodine. The resulting halogens act as bulk recombination centers. While the interstitial halogen density does decay when the cell is operated in forward bias, permanent degradation can occur if the iodine diffuses out of the perovskite layer. Finally, the ways in which changing parameters such as the mobile ion density or the series resistance at the contact can influence device performance and stability are discussed.

degradation↗