Engineering topics

Keith, T. G., Jr.

Publications and source records attributed to Keith, T. G., Jr..

34 records · Page 2

NASA NTRS1988

An experimental investigation of the effect of test-cell pressure on the performance of resistojets

The effect of test-cell pressure on the performance of two resistojets was investigated. Tests were conducted in a vacuum facility at pressures ranging from 0.000043 to 0.54 torr for two resistojet configurations: a laboratory model and an engineering model for the Space Station. The tests showed that for each thruster there was a decline in performance when tested in vacuum pressures above 0.001 torr. Measurements were made of surface temperature, thrust, and exit-plane pitot pressure over the range of test-cell pressures. From these measurements, the decline in performance of the laboratory-model resistojet at higher cell pressures was attributed to heat losses due to convection. For the engineering-model resistojet, the decline in performance was found to be a combination of heat loss and an effect of cell pressure on the nozzle flow.

Manzella, D. H.↗

NASA NTRS1988

Transient two-dimensional heat transfer through a composite body with application to deicing of aircraft components

Nine different numerical methods are examined for their ability to model the process of the melting and removal of ice from an airfoil using electrothermal heaters. A technique is presented for modeling the phase change which assumes a phase for each node. The technique allows solvers such as Alternating Direction Implicit, Alternating Direction Explicit, and Strongly Implicit Procedure to find a solution which can then be iterated to find the correct phase of each node. Comparisons made for a standard deicer pad comprised of five layers showed the ADI method to be superior to the other methods considered.

Wright, W. B.↗

NASA NTRS1987

An LDA investigation of three-dimensional normal shock-boundary layer interactions in a corner

Nonintrusive, three-dimensional, measurements have been made of a normal shock wave-turbulent boundary layer interaction. The measurements were made in the corner of the test section of a continuous supersonic wind tunnel in which a normal shock wave had been stabilized. LDA, surface pressure measurement and flow visualization techniques were employed for two freestream Mach number test cases: 1.6 and 1.3. The former contained separated flow regions and a system of shock waves. The latter was found to be far less complicated. The reported results are believed to accurately define the flow physics of each case and may be used as benchmark data to verify three-dimensional computer codes.

Chriss, R. M.↗

NASA NTRS1987

The effect of ambient pressure on the performance of a resistojet

Tests were conducted to investigate the effect of ambient pressure on the measured thrust of a prototype resistojet. The tests were performed using both heated and unheated nitrogen as the propellant at flow rates of 0.0379 and 0.0759 g/s. For the cold flow tests there was no effect on specific impulse over a range of ambient pressures from 1 to 400 microns. The results for the hot flow tests did show as much as a 7 percent variation in specific impulse over the same range of ambient pressures.

Manzella, D. H.↗

NASA NTRS1987

Efficient numerical simulation of an electrothermal de-icer pad

In this paper, a new approach to calculate the transient thermal behavior of an iced electrothermal de-icer pad was developed. The method of splines was used to obtain the temperature distribution within the layered pad. Splines were used in order to create a tridiagonal system of equations that could be directly solved by Gauss elimination. The Stefan problem was solved using the enthalpy method along with a recent implicit technique. Only one to three iterations were needed to locate the melt front during any time step. Computational times were shown to be greatly reduced over those of an existing one dimensional procedure without any reduction in accuracy; the curent technique was more than 10 times faster.

Roelke, R. J.↗

NASA NTRS1986

Numerical prediction of cold turbulent flow in combustor configurations with different centerbody flame holders

A numerical study of cold turbulent flow in a combustor containing a centerbody flame holder is presented. The axisymmetric Navier-Stokes equations incorporating a k-epsilon turbulence model were solved in a nonorthogonal curvilinear coordinate system. The finite volume method, applied to a staggered grid system, was used to discretize the differential equations. These finite differenced equations were then solved iteratively utilizing the SIMPLE algorithm described by Patankar (1980). Solutions were obtained for two combustor duct geometries with various centerbody flame holders which included a disk, a cone, and a sphere. The extent of mixing due to these bodies was evaluated. A comparison with previously obtained experimental data yielded moderately good agreement.

Yung, C. N.↗

NASA NTRS1986

Operating aspects of an oil pumping ring seal

Past analyses have left several unanswered questions regarding the operation of a pumping ring seal. This paper addresses some of these unresolved problems. In particular, treatment of the film-ring interfacial boundary condition and the return portion of the pumping cycle are numerically investigated. Further a simple model is proposed to determine whether or not the seal operates fully flooded.

Smith, P. J.↗

NASA NTRS1986

A numerical and experimental investigation of electrothermal aircraft deicing

Experimental data were obtained for the deicing characteristics of a stationary UH-1H helicopter blade which had been fitted with an electrothermal deicer assembly. The tests were run in the NASA Lewis Icing Research Tunnel, and yielded transient temperature responses for the substrate, heater and abrasion shield at selected positions around the blade. The data at the abrasion shield-ice interface clearly documented when melting, shedding or refreezing occurred. Comparisons were made between the experimental data and a one-dimensional numerical model. The agreement was generally very good, with the simulations being shown to be capable of predicting the transient temperature responses along with phase change and ice shedding. At many blade positions, the model was capable of accurately simulating the thermal response of the electrothermal deicer assembly.

Leffel, K.↗

NASA NTRS1985

Aerodynamic analysis of a horizontal axis wind turbine by use of helical vortex theory, volume 2: Computer program users manual

A description of a computer program entitled VORTEX that may be used to determine the aerodynamic performance of horizontal axis wind turbines is given. The computer code implements a vortex method from finite span wind theory and determines the induced velocity at the rotor disk by integrating the Biot-Savart law. It is assumed that the trailing helical vortex filaments form a wake of constant diameter (the rigid wake assumption) and travel downstream at the free stream velocity. The program can handle rotors having any number of blades which may be arbitrarily shaped and twisted. Many numerical details associated with the program are presented. A complete listing of the program is provided and all program variables are defined. An example problem illustrating input and output characteristics is solved.

Keith, T. G., Jr.↗

NASA NTRS1985

Full two-dimensional transient solutions of electrothermal aircraft blade deicing

Two finite difference methods are presented for the analysis of transient, two-dimensional responses of an electrothermal de-icer pad of an aircraft wing or blade with attached variable ice layer thickness. Both models employ a Crank-Nicholson iterative scheme, and use an enthalpy formulation to handle the phase change in the ice layer. The first technique makes use of a 'staircase' approach, fitting the irregular ice boundary with square computational cells. The second technique uses a body fitted coordinate transform, and maps the exact shape of the irregular boundary into a rectangular body, with uniformally square computational cells. The numerical solution takes place in the transformed plane. Initial results accounting for variable ice layer thickness are presented. Details of planned de-icing tests at NASA-Lewis, which will provide empirical verification for the above two methods, are also presented.

Masiulaniec, K. C.↗

NASA NTRS1985

The effects of strong shock loading on coupled bending-torsion flutter of tuned and mistuned cascades

This paper presents an investigation of the effects of strong in-passage shock waves on coupled bending-torsion flutter of both tuned and mistuned cascades. The aerodynamic and inertial coupling between the bending and torsional motions of each blade are included in the analytical model. Analysis revealed (1) that the shock loading has a beneficial effect on torsional flutters of both tuned and mistuned cascades and (2) that alternating bending mistuning has a beneficial effect on shock load induced bending flutter. The latter finding becomes important when shock induced bending flutter is a problem.

Busbey, B. C.↗

NASA NTRS1984

Finite difference solutions of heat conduction problems in multi-layered bodies with complex geometries

A numerical procedure is presented for analyzing a wide variety of heat conduction problems in multilayered bodies having complex geometry. The method is based on a finite difference solution of the heat conduction equation using a body fitted coordinate system transformation. Solution techniques are described for steady and transient problems with and without internal energy generation. Results are found to compare favorably with several well known solutions.

Masiulaniec, K. C.↗

NASA NTRS1984

Predicted electrothermal deicing of aircraft blades

A finite difference method is presented for the transient two-dimensional simulation of an electrothermal de-icer pad of an aircraft wing or blade. The irregular geometry of the composite ice laden blade is handled by use of a body fitted coordinate transformation. By this approach the various blade layers are mapped into a set of stacked rectangular strips in which the numerical solution takes place. Several heat conduction examples are presented in order to demonstrate the accuracy of the numerical procedure. Ice melting time predictions are made and compared to earlier predictions where possible. Finally, a new graphical presentation of thermal results is shown.

Keith, T. G., Jr.↗

NASA NTRS1982

Investigation of the effects of initial fluid film profile on pumping ring operation

The effect of the initial fluid film profile on the pumping capacity of a pumping ring shaft seal has been investigated numerically. Linear, concave, convex and compound film shapes were considered. It was found that initial film shape has a pronounced effect on both the amount of fluid pumped and on the character of the flow pattern and pressure distribution within the film.

Smith, P. J.↗

NASA NTRS1982

Thermoelastohydrodynamic analysis of an oil pumping ring seal

The selection and evaluation of the numerical methods used in the thermoelastohydrodynamic analysis of an oil pumping ring seal are described, and the results from test problems used to demonstrate the validity of the implementing computer program are presented. A sampling of predicted pumping ring performance values is compared with existing experimental data. Agreement between prediction and test performance is obtained, yielding detailed information concerning fluid and solid parameters.

Smith, P. J.↗

NASA NTRS1980

Performance of a steel spar wind turbine blade on the Mod-0 100 kW experimental wind turbine

The performance and loading of a large wind rotor, 38.4 m in diameter and composed of two low-cost steel spar blades were examined. Two blades were fabricated at Lewis Research Center and successfully operated on the Mod-0 wind turbine at Plum Brook. The blades were operated on a tower on which the natural bending frequency were altered by placing the tower on a leaf-spring apparatus. It was found that neither blade performance nor loading were affected significantly by this tower softening technique. Rotor performance exceeded prediction while blade loads were found to be in reasonable agreement with those predicted. Seventy-five hours of operation over a five month period resulted in no deterioration in the blade.

Keith, T. G., Jr.↗