Engineering Papers⌕ Search

Engineering topics

Kays, W. M.

Publications and source records attributed to Kays, W. M..

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Free convection over a vertical porous plate with transpiration

The problem of free convection over an isothermal vertical porous plate with transpiration is studied both numerically and experimentally. Numerical solutions to the variable-property transpired free-convection boundary layer equations have been obtained using the finite difference procedure of Patankar and Spalding (1967). The effects of uniform transpiration on heat transfer and on temperature and velocity profiles are predicted. Interferometrically measured nondimensional temperature profiles for the uniform wall temperature and transpiration case agreed closely with these numerical predictions.

Parikh, P. G.↗
NASA NTRS1974

The superposition approach to film-cooling

Conventional film-cooling theory uses the adiabatic wall temperature as the reference temperature instead of free-stream temperature in evaluating the wall heat flux. In this study the basic character of film cooling is explained in terms of nondimensional injection temperature. An alternative to the conventional scheme is proposed, and the two schemes are compared.

Choe, H.↗
NASA NTRS1974

Turbulent transport of heat and momentum in a boundary layer subject to deceleration, suction and variable wall temperature

The relationship between the turbulent transport of heat and momentum in an adverse pressure gradient boundary layer was studied. An experimental study was conducted of turbulent boundary layers subject to strong adverse pressure gradients with suction. Near-equilibrium flows were attained, evidenced by outer-region similarity in terms of defect temperature and defect velocity profiles. The relationship between Stanton number and enthalpy thickness was shown to be the same as for a flat plate flow both for constant wall temperature boundary conditions and for steps in wall temperature. The superposition principle used with the step-wall-temperature experimental result was shown to accurately predict the Stanton number variation for two cases of arbitrarily varying wall temperature. The Reynolds stress tensor components were measured for strong adverse pressure gradient conditions and different suction rates. Two peaks of turbulence intensity were found: one in the inner and one in the outer regions. The outer peak is shown to be displaced outward by an adverse pressure gradient and suppressed by suction.

Orlando, A. F.↗
NASA NTRS1972

The turbulent boundary layer on a porous plate: An experimental study of the heat transfer behavior with adverse pressure gradients

An experimental investigation of the heat transfer behavior of the near equilibrium transpired turbulent boundary layer with adverse pressure gradient has been carried out. Stanton numbers were measured by an energy balance on electrically heated plates that form the bottom wall of the wind tunnel. Two adverse pressure gradients were studied. Two types of transpiration boundary conditions were investigated. The concept of an equilibrium thermal boundary layer was introduced. It was found that Stanton number as a function of enthalpy thickness Reynolds number is essentially unaffected by adverse pressure gradient with no transpiration. Shear stress, heat flux, and turbulent Prandtl number profiles were computed from mean temperature and velocity profiles. It was concluded that the turbulent Prandtl number is greater than unity in near the wall and decreases continuously to approximately 0.5 at the free stream.

Blackwell, B. F.↗
NASA NTRS1972

The turbulent boundary layer on a porous plate: An experimental study of the fluid mechanics for adverse free stream pressure gradients

An experimental investigation of transpired turbulent boundary layers in zero and adverse pressure gradients has been carried out. Profiles of: (1) the mean velocity, (2) the three intensities of the turbulent fluctuations, and (3) the Reynolds stress were obtained by hot-wire anemometry. The friction coefficients were measured by using an integrated form of the boundary layer equation to extrapolate the measured shear stress profiles to the wall.

Anderson, P. S.↗
NASA NTRS1972

Heat transfer to the transpired turbulent boundary layer.

This paper contains a summarization of five years work on an investigation on heat transfer to the transpired turbulent boundary layer. Experimental results are presented for friction coefficient and Stanton number over a wide range of blowing and suction for the case of constant free-stream velocity, holding certain blowing parameters constant. The problem of the accelerated turbulent boundary layer with transpiration is considered, experimental data are presented and discussed, and theoretical models for solution of the momentum equation under these conditions are presented. Data on turbulent Prandtl number are presented so that solutions to the energy equation may be obtained. Some examples of boundary layer heat transfer and friction coefficient predictions are presented using one of the models discussed, employing a finite difference solution method.

Kays, W. M.↗
NASA NTRS1972

The turbulent boundary layer on a porous plate - Experimental heat transfer with uniform blowing and suction, with moderately strong acceleration.

Experimental data are presented for heat transfer to the turbulent boundary layer subjected to transpiration and acceleration at constant values of the acceleration parameter K of approximately .00000145. This is a moderately strong acceleration, but not so strong as to result in laminarization of the boundary layer. The results for transpiration fractions F of -0.002, 0.0, and +0.0058 are presented in detail in tabular form, and in graphs of Stanton number versus enthalpy thickness Reynolds number. In addition, temperature profiles at several stations are presented. Stanton number results for F = -0.004, +0.002, and +0.004 are also presented, but in graphical form only. The data were obtained using air as both the free-stream and the transpired fluid, at relatively low velocities, and with temperature differences sufficiently low so that the influence of temperature-dependent fluid properties is minimal. All data were obtained with the surface maintained at a temperature invariant in the direction of flow.

Thielbahr, W. H.↗
NASA NTRS1971

Experimental hydrodynamics of the accelerated turbulent boundary layer with and without mass injection.

Mean velocity-profile data are reported for blown, unblown, and sucked accelerated turbulent boundary layers. The pressure gradients investigated are those corresponding to constant values of the pressure-gradient parameter. The results obtained indicate that acceleration apparently causes an increase in the thickness of the viscous sublayer. Blowing opposes this effect, while suction enhances it. It seems evident that strong acceleration and/or strong suction will lead to a complete laminarization of the boundary layer. An empirical correlation of the data is presented in the form of a tabular correlation of the damping constant in the van Driest (1956) mixing-length hypothesis.

Julien, H. L.↗