Engineering topics

Kauffman, Douglas [NETL] (ORCID:0000000278553428)

Publications and source records attributed to Kauffman, Douglas [NETL] (ORCID:0000000278553428).

9 records

DOE OSTI2026

Boosting CO2R Performance of Ag Electrocatalysts by Sulfur-Doped Carbon Support

We find that S-doped carbon support can boost the CO2 reduction (CO2R) performance of Ag electrocatalysts. Firstly, surface science enabled electrocatalysis showed that Ag supported on S-doped highly oriented pyrolytic graphite (HOPG), a model electrocatalyst, demonstrated 100% higher CO turnover frequency (TOFCO = 3.6 ± 0.2 CO/atomAg/s) than that supported on S-free HOPG (TOFCO = 1.8 ± 0.2 CO/atomAg/s). Computational modeling based on density functional theory (DFT) revealed a more stabilized *COOH intermediate on Ag supported on S-doped carbon and thus a more favorable energetic pathway of CO2-to-CO, consistent with experimental results from the model electrocatalysts studies. Finally, this proof of concept was translated to the synthesis of powder electrocatalyst with 2 wt% Ag supported on S-doped carbon black, demonstrating > 40-fold high CO mass activity than a commercial Ag cathode with steady FECO ~ 96% at 100 mA/cm2 for 50 hours of continuous operation in a gas diffusion electrode (GDE) electrolyzer. For comparison, 2 wt% Ag supported on carbon black without S- doping showed a maximum FECO ~ 70% at 100 mA/cm2. This work demonstrates a successful bottom-up design of CO2R electrocatalysts guided by surface science enabled electrocatalysis.

CO2 conversion↗

DOE OSTI2025

Device configuration to produce liquid chemicals/fuels from low-value waste stream: Which is the most appropriate for catalyst screening?

This invited oral presentation at ACS Fall 2025 primarily discussed NETL's on-going efforts on device benchmarking studies for CO2 conversion to formic acid to identify the most appropriate device hardware and methodology for catalyst screening to advance the larger scale deployment.

chemicals production↗

DOE OSTI2025

Optimization of Ag Electrocatalyst Performance for CO2 to CO Conversion: Pairing Atomic Simulations with Experiments

Density-functional theory- based calculations that complement our series of experimental efforts on optimizing Ag electrocatalyst performance for CO2 to CO conversion were presented. Three key findings are drawn out from the combined UHV surface science, STM and electrochemical measurements: (1) Using a series of Ag nanoparticles with 2-6 nm average diameters, CO2 reduction reaction (CO2RR) activity increases, with particle between 2 nm and ∼4 nm demonstrating the highest combination of activity and selectivity; (2) Electronic metal−support interactions (EMSIs) between Ag and C dramatically improve CO2RR performance as evidenced by a scaling relationship between particle size and the relative Ag−C EMSIs strength, which improves the CO2-to-CO Faradaic efficiency of sub-2 nm Ag particles from 2 to ∼100% and increases the CO turnover frequency ∼15-fold compared with similarly sized bare Ag particles; (3) The performance Ag electrocatalysts is improved when supported on S-doped C materials. Computational modeling of 1−10 nm Ag particles predicts a nearly identical size-dependent trend with maximum CO2RR activity predicted for 3.7nm particles. The calculations support the promotional effect of C materials, showing a large charge transfer of 1.02 e from Ag clusters to defective C and a 0.41 eV less endergonic step of forming COOH intermediate on Ag/defective-C compared to the Ag/C system. Calculations indicate a more favorable energetic pathway of CO2-to-CO at the C-S-Ag interface, consistent with experiments.

CO2 utilization↗

DOE OSTI2025

Aqueous-Based Granulation Method Towards Syngas Production

An aqueous-based granulation method is developed to combat the structural changes associated with binder-based granulation techniques. Microwave-assisted methane reforming studies showed an improved catalyst efficiency for these aqueous-based granules compared to the powder catalysts. This granulation method has been extended to other practical applications (chemical looping gasification and air separations).

aqueous-based granulation↗

DOE OSTI2025

Optimization of Ag Electrocatalyst Performance for CO2 to CO Conversion: Pairing Atomic Simulations with Experiments

This invited presentation encapsulates computational investigation of nanostructured Ag electrocatalyst for CO2 to CO conversion to complement the surface science/electrochemical experiments.

catalysis↗

DOE OSTI2025

Theoretical study of CO2 capture mechanisms of SrO and Sr(OH)2.nH2O (n=0,1,8)

This presentation encapsulated the use of density functional theory (DFT) to investigate the mechanism of CO2 conversion on various crystal surfaces, including SrO, Sr(OH)2, Sr(OH)2·H2O, and Sr(OH)2·8H2O. The study provides unique insights into the fundamental mechanism for CO2 capture using SrO and its hydrated forms.

catalyst performance↗

DOE OSTI2025

Electrocatalyst Engineering and Device Benchmarking for Low Temperature CO2 Electrolysis

This oral presentation is for an invited talk in Division of Energy and Fuels, Symposium: "CO2 Conversion and Utilization-II: Electrochemical CO2 Conversion to Fuels and Valuable Chemicals" at ACS Spring 2025 (March 23-27, 2025) in San Diego, CA. The presentation will primarily discuss the crucial role of electrocatalyst design in the CO2 conversion to sustainable, carbon-neutral gas and liquid products. Some preliminary benchmarking studies of off-the-shelf electrocatalysts will be also shown in different device configurations to achieve good selectivity at industrially relevant current densities.

CO2 electrochemical reduction↗

DOE OSTI2025

Understanding of Ag Nanocatalysts for Electrocatalytic CO2 Conversion: Effects of Particle Size and Carbon Support

In this talk, we combined ultrahigh vacuum (UHV) surface science techniques, electrochemical measurements, and computational modeling to investigate Ag based electrocatalysts for CO2 reduction reaction (CO2RR). Our goal is to understand the critical characteristics governing the activity and selectivity of Ag electrocatalysts. Ag electrocatalysts were grown on highly oriented pyrolytic graphite (HOPG) in the UHV chamber, characterized with X-ray photoelectron spectroscopy (XPS) and scanning tunneling microscopy (STM), and then tested in a custom-built gastight H-cell. Supported by computational modeling based on density functional theory (DFT) calculations and microkinetic modeling (MKM), our studies revealed a strong size-dependent electrocatalytic CO2-to-CO conversion of the Ag nanoparticle electrocatalysts with average particle diameter between 2 to 6 nm. Smaller diameter (< 3 nm) particles favored H2 evolution reaction (HER) due to a high population of Ag edge sites, whereas larger diameter particles favored CO2RR as the population of Ag(100) surface sites grew. We further discovered that electronic interactions between small diameter Ag particles and highly defective carbon supports could break the size-dependent CO2RR reactivity, resulting in highly selective (CO Faradaic Efficiency > 90%) and active Ag nanoparticle electrocatalysts with sizes < 2 nm diameter. This knowledge is key to understand electrocatalysts performance and to ultimately guide electrocatalyst design

Ag nanoparticles↗

DOE OSTI2025

Theoretical study of CO2 capture mechanisms of SrO and Sr(OH)2.nH2O (n=0,1,8)

In this presentation, the adsorption reactions of CO2 on SrO surfaces and its hydrated counterparts are examined. The predicted energies of CO2 adsorption on follows the order of increasing H2O content. The carbonation on the monohydrate surface is barrierless, whereas the CO2 reaction on the Sr(OH)2 and the octahydrate surfaces follows pathways with finite activation barriers. The thermodynamics of bulk reaction is also addressed.

computational science and engineering↗