Engineering Papers⌕ Search

Engineering topics

Karoutas, Zeses

Publications and source records attributed to Karoutas, Zeses.

Cold spray chromium coating for nuclear fuel rods

A zirconium alloy cladding tube for use in a water cooled nuclear reactor under normal operating conditions and under high temperature oxidation conditions is described. The cladding tube has a coating uniformly deposited thereon. The coating, which may be up to 300 microns thick, is selected from the group consisting of chromium, a chromium-based alloy, and combinations thereof.

36 MATERIALS SCIENCE↗

Control rods for light water reactors

A control rod for a nuclear fuel assembly is described herein that includes a neutron absorbing material having a melting point greater than 1500° C. that does not form a eutectic with a melting point less than 1500° C., and may further include a cladding material having a melting point greater than 1500° C. The cladding material is selected from the group consisting of silicon carbide, zirconium, a zirconium alloy, tungsten, and molybdenum. The absorbing material is selected from the group consisting of Gd2O3, Ir, B4C, Re, and Hf. The metal cladding or the absorbing material may be coated with an anti-oxidation coating of Cr with or without a Nb intermediate layer.

Lahoda, Edward J.↗

Cold spray chromium coating for nuclear fuel rods

A method is provided for coating the substrate of a component, such as a zirconium alloy cladding tube, for use in a water cooled nuclear reactor under normal operating conditions and under high temperature oxidation conditions. The method includes heating a pressurized carrier gas to a temperature between 200° C. and 1200° C., adding chromium or chromium-based alloy particles having an average diameter of 20 microns or less to the heated carrier gas, and spraying the carrier gas and particles onto the substrate at a velocity, preferably from 800 to 4000 ft./sec. (about 243.84 to 1219.20 meters/sec.), to form a chromium and/or chromium-based alloy coating on the substrate to a desired thickness.

36 MATERIALS SCIENCE↗

Large-eddy simulation, fuel rod vibration and grid-to-rod fretting in pressurized water reactors

Grid-to-rod fretting (GTRF) in pressurized water reactors is a flow-induced vibration phenomenon that results in wear and fretting of the cladding material on fuel rods. GTRF is responsible for over 70% of the fuel failures in pressurized water reactors in the United States. Predicting the GTRF wear and concomitant interval between failures is important because of the large costs associated with reactor shutdown and replacement of fuel rod assemblies. The GTRF-induced wear process involves turbulent flow, mechanical vibration, tribology, and time-varying irradiated material properties in complex fuel assembly geometries. This paper presents a new approach for predicting GTRF induced fuel rod wear that uses high-resolution implicit large-eddy simulation to drive nonlinear transient dynamics computations. The GTRF fluid–structure problem is separated into the simulation of the turbulent flow field in the complex-geometry fuel-rod bundles using implicit large-eddy simulation, the calculation of statistics of the resulting fluctuating structural forces, and the nonlinear transient dynamics analysis of the fuel rod. Ultimately, the methods developed here, can be used, in conjunction with operational management, to improve reactor core designs in which fuel rod failures are minimized or potentially eliminated. Furthermore, robustness of the behavior of both the structural forces computed from the turbulent flow simulations and the results from the transient dynamics analyses highlight the progress made towards achieving a predictive simulation capability for the GTRF problem.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Proposed Test Stand Selection Criteria

The Consortium for Advanced Simulation of Light Water Reactors (CASL) is developing modeling and simulation capabilities to provide predictive performance of reactors with a specific focus on several challenge problems to support power uprates, life extension, and use of higher burnup fuels. A critical element of the success of the CASL M&S hub will be the ability to transfer the technology (both methods and software) developed by CASL to external stakeholders (including the industry, regulatory and research communities) and for these stakeholders to apply these methods and tools to address critical issues related to the long-term efficient and safe operation of commercial NPPs. An important element to enable the achievement of this objective is the development and deployment of industry Test Stands, which are intended to serve as a primary mechanism for initial deployment of CASL developed technology to these stakeholders.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Thermal Hydraulic Validation Report

The test is a classical example of gas flow in a round pipe. It tests the ability of the code to compute the velocity profiles at different dominantly high Reynolds numbers Reynolds number K-E turbulence models are used and to that extent, the test evaluates the implementation of wall functions in the K-E models.

42 ENGINEERING↗

Application of Advanced Methods to Predict Grid to Rod Fretting in PWRs

Advanced modeling and simulation methods are being developed as part of the US Department of Energy sponsored Nuclear Energy Modeling and Simulation Hub called CASL (Consortium for Advanced Simulation of LWRs). The key participants of the CASL team include Oak Ridge National Laboratory (lead), Idaho National Laboratory, Sandia National Laboratories, Los Alamos National Laboratory, Massachusetts Institute of Technology, North Carolina State University, University of Michigan, Electric Power Research Institute, Tennessee Valley Authority and Westinghouse Electric Corporation. One of the key objectives of the CASL program is to develop multi-physics methods and tools which evaluate neutronic, thermal-hydraulic, structural mechanics and nuclear fuel rod performance in rod bundles to support power uprates, increased burnup/cycle length and life extension for US nuclear plants.

Karoutas, Zeses↗

CASL Virtual Reactor Predictive Simulation: Grid-to-Rod Fretting Wear

Grid-to-Rod Fretting (GTRF) wear is currently one of the main causes of fuel rod leaking in pressurized water reactors. The Consortium for Advanced Simulation of Light Water Reactors (CASL) has identified GTRF as one of the Challenge Problems that drive the requirement for the development and application of a modeling and simulation computational environment for predictive simulation of light water reactors. This paper presents fretting wear simulation methodology currently employed by Westinghouse, a CASL industrial partner, to address GTRF. The required advancements in the computational and materials science modeling areas to develop a predictive simulation environment by CASL to address GTRF are outlined.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗