Engineering Papers⌕ Search

Engineering topics

Kanatzidis, Mercouri

Publications and source records attributed to Kanatzidis, Mercouri.

13 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Understanding Instability in Formamidinium Lead Halide Perovskites: Kinetics of Transformative Reactions at Grain and Subgrain Boundaries

Transformative and reconstructive reactions impart significant structural changes at particle boundaries of hybrid perovskites, which influence environmental stability and optoelectronic properties of these materials. Here, we investigate the moisture-induced transformative reactions in formamidinium based perovskites FAPbX 3 (X=I, Br) and show that the ambient stability of these materials can be adjusted from a few hours to several months. For FAPbI 3 , roles of water vapor, particle size, and light illumination on the kinetic pathways of the cubic (a) transformation to the hexagonal (d) phase are analyzed by X-ray diffraction, optical microscopy, photoluminescence and solid-state NMR spectroscopy techniques. The grain and sub-grain boundaries exhibit different α→δ-FAPbI 3 phase transformation kinetics. Our study suggests that the dynamic transformation involves the local water-induced dissolution of the cubic phase occurring at the crystal surfaces followed by precipitation of the hexagonal phase. Insights into structures and dynamics of a kinetically trapped α-|δ-FAPbI 3 are obtained by 1 H, 2 H, and 207 Pb ssNMR spectroscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Highly efficient photoelectric effect in halide perovskites for regenerative electron sources

Electron sources are a critical component in a wide range of applications such as electron-beam accelerator facilities, photomultipliers, and image intensifiers for night vision. We report efficient, regenerative and low-cost electron sources based on solution-processed halide perovskites thin films when they are excited with light with energy equal to or above their bandgap. We measure a quantum efficiency up to 2.2% and a lifetime of more than 25 h. Importantly, even after degradation, the electron emission can be completely regenerated to its maximum efficiency by deposition of a monolayer of Cs. The electron emission from halide perovskites can be tuned over the visible and ultraviolet spectrum, and operates at vacuum levels with pressures at least two-orders higher than in state-of-the-art semiconductor electron sources.

36 MATERIALS SCIENCE↗
DOE OSTI2019

EFRC 10@10: More Efficient, Low-Cost Solar Cells

Silicon solar cells have dominated industrial solar energy facilities, but they convert only about a quarter of the sunlight that reaches them to electric power. To explore alternative approaches, the U.S. Department of Energy’s Office of Science funded an Energy Frontier Research Center (EFRC) that is now called Light Energy Activated Redox Processes. Two of the Center’s principal investigators, Mercouri Kanatzidis and Robert Chang, both at Northwestern University, collaborated on the project. Many research groups were investigating a type of thin-film solar cell that combines a photo-sensitized material that could efficiently absorb light and generate electrons with a liquid that could capture and conduct the electrons. When Chang investigated these solar cells more carefully, however, he concluded they were not a promising solution because the liquid was corrosive and would eventually lead to cell failure. He suggested finding a different material to pair with the photo-sensitized thin-film layer. As it happened, Kanatzidis knew of a class of materials called perovskites that might work and proposed that Chang try it as the substitute material. Perovskites combine several different elements, have a unique structure, and are easy to make. A prototype cell combining a thin layer of perovskite and a photo-sensitized material not only worked, but the thin layer of perovskite also absorbed additional sunlight, boosting efficiency. Additional research improved performance to 10 percent efficiency.

14 SOLAR ENERGY↗
DOE OSTI2018

The 2019 materials by design roadmap

Advances in renewable and sustainable energy technologies critically depend on our ability to design and realize materials with optimal properties. Materials discovery and design efforts ideally involve close coupling between materials prediction, synthesis and characterization. Increased use of computational tools, the generation of materials databases, and advances in experimental methods have substantially accelerated these activities. It is therefore an opportune time to consider future prospects for materials by design approaches. The purpose of this roadmap is to present an overview of the current state of computational materials prediction, synthesis and characterization approaches, materials design needs for various technologies, and future challenges and opportunities that must be addressed. Perspectives cover topics on computational techniques, validation, materials databases, materials informatics, high-throughput combinatorial methods, advanced characterization approaches, and materials design issues in thermoelectrics, photovoltaics, solid state lighting, catalysts, batteries, metal alloys, complex oxides and transparent conducting materials. It is our hope that this roadmap will guide researchers and funding agencies in identifying new prospects for materials design.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Basic Research Needs Workshop on Synthesis Science for Energy Relevant Technology

The technology that lies at our fingertips becomes more powerful each day. Smartphones connect us instantly to family, friends, and co-workers around the globe; give us access to a limitless stream of information; control the heating in our homes; and serve as our cameras, calculators, flashlights, music players, boarding passes and, on occasion, our phones. Cars are ever more fuel-efficient, safer, semi-autonomous, and have more computing power than the systems that guided humankind to the moon. LED lighting and solar panels are becoming commonplace, replacing less efficient technologies and expanding the energy options available worldwide. Novel polymers and nanoparticles are playing a crucial role in enhanced oil recovery. None of these advances would have been possible without the discovery and development of, and ability to create, new materials and chemical processes. Now imagine what our world would be like if we could accelerate those discoveries a thousandfold. What if the only limit to synthesizing new forms of matter were the imagination? We could build complex assemblies of atoms and molecules with architectures and capabilities far exceeding those of materials found in nature—for example, develop catalysts that turn garbage into fuels, design solar cells to power our homes directly from sunlight, make batteries with the energy density of gasoline, and create one- and two-dimensional solids that transport charge hundreds of times faster than silicon or allow us to build quantum bits based on the spins of electrons or photons to realize the promise of “beyond Moore’s law” computing. Advances in synthesis science are required to bring about this future—we not only must know how to design new molecules and materials with desired functions and properties through theory and computational techniques; we also must be able to make the materials we envision. New approaches to discovering as yet unimagined matter require a sea change in the way we think about the science of synthesis. Chemical and materials sciences have traditionally focused on understanding structure–function relationships with the goal of predicting where the atoms should be placed to achieve a targeted property or process. Much less effort has been directed toward a predictive science of synthesis—understanding how to get the atoms where they need to go to achieve the desired structure. This report, which is the result of the Basic Energy Sciences Workshop on Basic Research Needs for Synthesis Science for Energy Technologies, lays out the scientific challenges and opportunities in synthesis science. The workshop was attended by more than 100 leading national and international scientific experts. Its five topical and two crosscutting panels identified four priority research directions (PRDs) for realizing the vision of predictive, science-directed synthesis.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2016

Novel Metal Sulfides to Achieve Effective Capture and Durable Consolidation of Radionuclides

This report documents the work done under NEUP grant to examine the capability of novel chalcogels and some binary metal chalcogenides as a host matrix for the capture of gaseous iodine and the feasibility of their iodine-laden materials to be converted into a permanent waste form. The presented work was conducted over last two years. A number of novel chalcogels Zn 2 Sn 2 S 6 , Sb 4 Sn 4 S 12 , NiMoS 4 , CoMoS 4 , antimony sulfide (SbS x ) chalcogels, silver functionalized chalcogels and binary metal sulfides (Sb 2 S 3 ) were developed and studies for their iodine absorption efficacies. A new and simple route was devised for the large scale preparation of antimony sulfide chalcogel. The chalcogel was obtained by treating Sb 2 S 3 with Na 2 S in the presence of water followed by addition of formamide. The obtained gels have a low-density sponge like network of meso porous nature having BET surface area of 125 m 2 /g. The chalcogels, silver functionalized chalcogel and the binary metal sulfides were exposed to iodine vapors in a closed container. Silver-functionalized chalcogels and Sb 2 S 3 powders showed iodine uptake up to 100 wt%, the highest iodine uptake of 200 wt% was observed for the SbS-III chalcogel. The PXRD patterns of iodine-laden specimens revealed that iodine shows spontaneous chemisorption to the matrix used. The iodine loaded chalcogels and the binary chalcogenides were sealed under vacuum in fused silica ampoules and heated in a temperature controlled furnace. The consolidated products were analyzed by PXRD, energy dispersive spectroscopy (EDS), UV-Vis and Raman spectroscopy. The final products were found to be amorphous in most of the cases with high amount (~4-35 wt%) of iodine and aapproximately ~60- 90 % of the absorbed iodine could be consolidated into the final waste form. Alginate reinforced composite scaffolds with SbS/SnS chalcogels and Sb 2 S 3 bulk powder were also fabricated aiming to study their efficacy as host matrices in capturing the gaseous molecular iodine in dynamic mode from nuclear spent fuel. The obtained composites looks robust in comparison to their respective pristine chalcogels and Sb 2 S 3 bulk powder.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2015

Two-Dimensional Mineral [Pb 2 BiS 3 ][AuTe 2 ]: High-Mobility Charge Carriers in Single-Atom-Thick Layers

Two-dimensional (2D) electronic systems are of wide interest due to their richness in chemical and physical phenomena and potential for technological applications. Here we report that [Pb2BiS3][AuTe2], known as the naturally occurring mineral buckhornite, hosts 2D carriers in single-atom-thick layers. The structure is composed of stacking layers of weakly coupled [Pb2BiS3] and [AuTe2] sheets. The insulating [Pb2BiS3] sheet inhibits interlayer charge hopping and confines the carriers in the basal plane of the single-atom-thick [AuTe2] layer. Magneto-transport measurements on synthesized samples and theoretical calculations show that [Pb2BiS3][AuTe2] is a multiband semimetal with a compensated density of electrons and holes, which exhibits a high hole carrier mobility of similar to 1360 cm(2)/(V s). This material possesses an extremely large anisotropy, G = rho(c)/rho(ab) approximate to 10(4), comparable to those of the benchmark 2D materials graphite and Bi2Sr2CaCu2O6+delta. The electronic structure features linear band dispersion at the Fermi level and ultrahigh Fermi velocities of 10(6) m/s, which are virtually identical to those of graphene. The weak interlayer coupling gives rise to the highly cleavable property of the single crystal specimens. Our results provide a novel candidate for a monolayer platform to investigate emerging electronic properties.

Fang, Lei↗