Engineering topics

Junginger, T.

Publications and source records attributed to Junginger, T..

3 records

DOE OSTI2023

Statement from the American Linear Collider Committee to the P5 subpanel

This statement from the American Linear Collider Committee to the P5 subpanel has three purposes. It presents a brief summary of the case for an $e^+e^-$ Higgs factory that has emerged from Snowmass 2021. It highlights the special virtues of the ILC that are shared with other linear colliders but not with circular colliders. Finally, it calls attention to the resources available in the ILC White Paper for Snowmass (arXiv:2203.07622). The ALCC urges P5 to move the Higgs factory forward as a global project by assigning the idea of an $e^+e^-$ Higgs factory high priority, initiating a global discussion of the technology choice and cost sharing, and offering the option of siting the Higgs factory in the U.S.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2019

Critical fields of Nb 3 Sn prepared for superconducting cavities

Abstract Nb 3 Sn is currently the most promising material other than niobium for future superconducting radiofrequency cavities. Critical fields above 120 mT in pulsed operation and about 80 mT in CW have been achieved in cavity tests. This is large compared to the lower critical field as derived from the London penetration depth, extracted from low field surface impedance measurements. In this paper direct measurements of the London penetration depth from which the lower critical field and the superheating field are derived are presented. The field of first vortex penetration is measured under DC and RF fields. The combined results confirm that Nb 3 Sn cavities are indeed operated in a metastable state above the lower critical field but are currently limited to a critical field well below the superheating field.

43 PARTICLE ACCELERATORS↗

DOE OSTI2016

Devices for SRF material characterization

The surface resistance Rs of superconducting materials can be obtained by measuring the quality factor of an elliptical cavity excited in a transverse magnetic mode (TM010). The value obtained has however to be taken as averaged over the whole surface. A more convenient way to obtain Rs, especially of materials which are not yet technologically ready for cavity production, is to measure small samples instead. These can be easily man ufactured at low cost, duplicated and placed in film deposition and surface analytical tools. A commonly used design for a device to measure Rs consists of a cylindrical cavity excited in a transverse electric (TE110) mode with the sample under test serving as one replaceable endplate. Such a cavity has two drawbacks. For reasonably small samples the resonant frequency will be larger than frequencies of interest concerning SRF application and it requires a reference sample of known Rs. In this article we review several devices which have been designed to overcome these limitations, reaching sub - nΩ resolution in some cases. Some of these devices also comprise a parameter space in frequency and temperature which is inaccessible to standard cavity tests, making them ideal tools to test theoretical surface resistance models.

43 PARTICLE ACCELERATORS↗