Engineering Papers⌕ Search

Engineering topics

Juday, R. D.

Publications and source records attributed to Juday, R. D..

14 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Landsat image registration - A study of system parameters

Some applications of Landsat data, particularily agricultural and forestry applications, require the ability to geometrically superimpose or register data acquired at different times and possibly by different satellites. An experimental investigation relating to a registration processor used by the Johnson Space Center for this purpose is the subject of this paper. Correlation of small subareas of images is at the heart of this registration processor and the manner in which various system parameters affect the correlation process is the prime area of investigation. Parameters investigated include preprocessing methods, methods for detecting sucessful correlations, fitting a surface to the correlation patch, fraction of pixels designated as edge pixels in edge detection adn local versus global generation of edge images. A suboptimum search procedure is used to find a good parameter set for this registration processor.

Wacker, A. G.↗
NASA NTRS1982

Inter-image matching

Interimage matching is the process of determining the geometric transformation required to conform spatially one image to another. In principle, the parameters of that transformation are varied until some measure of some difference between the two images is minimized or some measure of sameness (e.g., cross-correlation) is maximized. The number of such parameters to vary is faily large (six for merely an affine transformation), and it is customary to attempt an a priori transformation reducing the complexity of the residual transformation or subdivide the image into small enough match zones (control points or patches) that a simple transformation (e.g., pure translation) is applicable, yet large enough to facilitate matching. In the latter case, a complex mapping function is fit to the results (e.g., translation offsets) in all the patches. The methods reviewed have all chosen one or both of the above options, ranging from a priori along-line correction for line-dependent effects (the high-frequency correction) to a full sensor-to-geobase transformation with subsequent subdivision into a grid of match points.

Wolfe, R. H., Jr.↗
NASA NTRS1982

Misregistration's effects on classification and proportion estimation accuracy

The estimates of crop type and acreage are undertaken in the AgRISTARS program by registering multiple date acquisitions of small subareas of LANDSAT scenes (termed segments), and applying multispectral analysis to them. An important contribution to errors in classification and acreage estimates is misregistration between multiple acquisitions. The formula used to express this relationship is given and the operations applied are so shown in diagrams. The taking of a LANDSAT feature vector and the derivation of the brightness and greeness are illustrated. It is shown that for any given sensor IFOV geometry, typical populations of fields can be derived and histograms can be plotted of the number of fields against field size according to ground truth. As a function of the resolution element, the IFOV of the sensor can draw the proportion of pure pixels in a given crop. Because the thematic mapper has a smaller resolution, the proportion of pixels that are pure in any given area will be larger.

Juday, R. D.↗
NASA NTRS1982

Landsat image registration for agricultural applications

An image registration system has been developed at the NASA Johnson Space Center (JSC) to spatially align multi-temporal Landsat acquisitions for use in agriculture and forestry research. Working in conjunction with the Master Data Processor (MDP) at the Goddard Space Flight Center, it functionally replaces the long-standing LACIE Registration Processor as JSC's data supplier. The system represents an expansion of the techniques developed for the MDP and LACIE Registration Processor, and it utilizes the experience gained in an IBM/JSC effort evaluating the performance of the latter. These techniques are discussed in detail. Several tests were developed to evaluate the registration performance of the system. The results indicate that 1/15-pixel accuracy (about 4m for Landsat MSS) is achievable in ideal circumstances, sub-pixel accuracy (often to 0.2 pixel or better) was attained on a representative set of U.S. acquisitions, and a success rate commensurate with the LACIE Registration Processor was realized. The system has been employed in a production mode on U.S. and foreign data, and a performance similar to the earlier tests has been noted.

Wolfe, R. H., Jr.↗
NASA NTRS1981

The magnifying glass - A feature space local expansion for visual analysis

The Magnifying Glass Transformation (MGT) technique is proposed, as a multichannel spectral operation yielding visual imagery which is enhanced in a specified spectral vicinity, guided by the statistics of training samples. An application example is that in which the discrimination among spectral neighbors within an interactive display may be increased without altering distant object appearances or overall interpretation. A direct histogram specification technique is applied to the channels within the multispectral image so that a subset of the spectral domain occupies an increased fraction of the domain. The transformation is carried out by obtaining the training information, establishing the condition of the covariance matrix, determining the influenced solid, and initializing the lookup table. Finally, the image is transformed.

Juday, R. D.↗
NASA NTRS1979

Colorimetric consideration of transparencies for a typical LACIE scene

The production film converter used to produce LACIE imagery is described as well as schemes designed to provide the analyst with operational film products. Two of these products are discussed from the standpoint of color theory. Colorimetric terminology is defined and the mathematical calculations are given. Topics covered include (1) history of product 1 and 3 algorithm development; (2) colorimetric assumptions for product 1 and 3 algorithms; (3) qualitative results from a colorimetric analysis of a typical LACIE scene; and (4) image-to-image color stability.

Juday, R. D.↗
NASA NTRS1979

Generation of uniform chromaticity scale imagery from LANDSAT data

An algorithm is presented for generating uniform chromaticity scale (UCS) imagery from multispectral data. A computer program was written to implement the algorithm, and UCS film products were generated. The colors in the film and their temporal change are consistent with those expected for the particular scaling of Krauth components into the (lab) color space. The film product was not subjected to the practical test of competing with previous transformations. Preliminary examination indicates that the product offers the following possibilities: (1) a single film product that will supplant two film products in current use; (2) improved visibility of data differences in regions in data space that are critical to crop identification; and (3) an analytic route to the determination of data-space transformations that will be optimal for particular discrimination problems.

Juday, R. D.↗
NASA NTRS1978

A maximal chromatic expansion method of mapping multichannel imagery into color space

The author has identified the following significant results. A color film generation method that maximally expands the chromaticity and aligns Kauth brightness with the gray axis was presented. In comparison with the current LACIE film product, the new color film product has more contrast and more colors and appears to be brighter. The field boundaries in the new product were more pronounced than in the current LACIE product. The speckle effect was one problem in the new product. The yellowness speckle can be treated using an equation. This equation can be used to eliminate any speckle introduced by the greenness. This product leads logically toward another that will employ quantitative colorimetry which will account for some of the eye's perception of color stimuli.

Juday, R. D.↗
NASA NTRS1977

Skylab S191 visible-infrared spectrometer

The paper describes the S191 visible-infrared spectrometer of the Skylab Earth Resources Experiment Package - a manually pointed two-channel instrument operating in the reflective (0.4-2.5 micron) and thermal emissive (6-15 micron) regions. A sensor description is provided and attention is given to data quality in the short wavelength and thermal infrared regions.

Barnett, T. L.↗
NASA NTRS1974

Summary of flight performance of the Skylab Earth Resources Experiment Package /EREP/

A group of six remote sensor systems (sensing visible, infrared, and microwave radiation) known as the Earth Resources Experiment Package (EREP) was flown on the NASA Skylab spacecraft to furnish data to numerous investigators in the earth sciences and in technology assessment. Inflight sensor performance in three categories (functional, geometric, and radiometric) was evaluated using: (1) ground measurements of surface, atmospheric, and illumination parameters; (2) ground deployment and operation of microwave receivers and transponders to monitor and excite the active EREP sensors; (3) measurement of surface and atmospheric parameters by instrumented aircraft on underflights of Skylab passes; and (4) analysis of the actual flight data. This resulted in identification and correction of anomalous sensor operation, quantization of geometric distortions or aberrations, improvement or confirmation of calibrations, and determination of sensitivity, accuracy, and stability of the sensors.

Potter, A. E.↗
NASA NTRS1968

Space radiation environment

Space radiation environment studies for design of shielding against cosmic rays, solar flare particles, and Van Allen radiation

Juday, R. D.↗