Engineering Papers⌕ Search

Engineering topics

Juang, Jer-Nan

Publications and source records attributed to Juang, Jer-Nan.

157 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Identification of large space structures on orbit : A survey

The Task Committee on Methods for Identification of Large Structures in Space was founded in Jul. 1984. The charter of the committee was to prepare a state-of-the-art report on methods of system identification applicable to large space structures (LSS). Funding to support preparation of the report was received in Aug. 1985 from the Air Force Rocket Propulsion Laboratory (now the Air Force Astronautics Laboratory), in the form of a contract to the ASCE. The report was completed, and published by AFRPL in Sep. 1986. The Task Committee consisted of ten members, including ASCE and AFRPL representatives. The membership represented Government, Industry, and Universities, and consisted of electrical, mechanical, and civil engineers, with backgrounds in Structural Dynamics, Optimization, and Controls. An effort was made to use consistent terminology and notation throughout the report which would be compatible with the terminology used in both the structures and controls communities.

Denman, Eugene E.↗
NASA NTRS1987

Research in slewing and tracking control

Technology areas are identified in which better analytical and/or experimental methods are needed to adequately and accurately control the dynamic responses of multibody space platforms such as the Space Station and the Radiometer Spacecraft. A generic space station model is used to experimentally evaluate current control technologies and a radiometer spacecraft model is used to numerically test a new theoretical development for nonlinear three-axis maneuvers. Active suppression of flexible body vibrations induced by large angle maneuvers is studied with multiple torque inputs and multiple measurement outputs. These active suppression tests identify the hardware requirements and adequacy of various controller designs.

Juang, Jer-Nan↗
NASA NTRS1987

Slewing control experiment for a flexible panel

Technology areas are identified in which better analytical and/or experimental methods are needed to adequately and accurately control the dynamic responses of multibody space platforms such as the space station. A generic space station solar panel is used to experimentally evaluate current control technologies. Active suppression of solar panel vibrations induced by large angle maneuvers is studied with a torque actuator at the root of the solar panel. These active suppression tests will identify the hardware requirements and adequacy of various controller designs.

Juang, Jer-Nan↗
NASA NTRS1987

An eigensystem realization algorithm using data correlations (ERA/DC) for modal parameter identification

A modification to the Eigensystem Realization Algorithm (ERA) for modal parameter identification is presented in this paper. The ERA minimum order realization approach using singular value decomposition is combined with the philosophy of the Correlation Fit method in state space form such that response data correlations rather than actual response values are used for modal parameter identification. This new method, the ERA using data correlations (ERA/DC), reduces bias errors due to noise corruption significantly without the need for model overspecification. This method is tested using simulated five-degree-of-freedom system responses corrupted by measurement noise. It is found for this case that, when model overspecification is permitted and a minimum order solution obtained via singular value truncation, the results from the two methods are of similar quality.

Juang, Jer-Nan↗
NASA NTRS1987

On the eigenvalue and eigenvector derivatives of a general matrix

The existence of differentiable eigenvalues and eigenvectors for a general matrix is addressed. The eigenspace which contains differentiable eigenvectors is determined and computed by using the concept of subspace intersection in conjunction with the singular value decomposition algorithm. The differentiable eigenvectors associated with repeated eigenvalues should be simultaneously the eigenvectors of the general matrix and its corresponding sensitivity matrix. Furthermore, the derivatives for differentiable eigenvectors associated with repeated eigenvalues can be computed using higher order derivatives of the matrix, whereas the corresponding eigenvalue derivatives are the eigenvalues of the sensitivity matrix.

Juang, Jer-Nan↗
NASA NTRS1987

Frequency-shaped large-angle maneuvers

The paper considers the problem of maneuvering a flexible spacecraft through large angles in finite time. The basic control problem is divided into two parts. The first part consists of generating a frequency-shaped open-loop solution for the nonlinear rigid body as the nominal solution. The resulting two-point boundary-value problem is solved by introducing a continuation method for altering the mass distribution and boundary conditions for the spacecraft. For the second part, a feedback control is designed by linearizing the flexible body response about several points along the rigid body nominal solution. The perturbation gains are designed by using a frequency-shaped cost functional approach. The gains are linearly interpolated to produce smooth control time-histories as the linear piecewise constant plant models change during the maneuver.

Chun, Hon M.↗
NASA NTRS1987

Robust eigensystem assignment for flexible structures

An improved method is developed for eigenvalues and eigenvectors placement of a closed-loop control system using either state or output feedback. The method basically consists of three steps. First, the singular value of QR decomposition is used to generate an orthonormal basis that spans admissible eigenvector space corresponding to each assigned eigenvalue. Secondly, given a unitary matrix, the eigenvector set which best approximates the given matrix in the least-square sense and still satisfy eigenvalue cosntraints is determined. Thirdly, a unitary matrix is sought to minimize the error between the unitary matrix and the assignable eigenvector matrix. For use as the desired eigenvector set, two matrices, namely, the open-loop eigenvector matrix and its closest unitary matrix are proposed. The latter matrix generally encourages both minimum conditioning and control gains. In addition, the algorithm is formulated in real arithmetic for efficient implementation. To illustrate the basic concepts, numerical examples are included.

Juang, Jer-Nan↗
NASA NTRS1987

Single-mode projection filters for identification and state estimation of flexible structures

Single-mode projection filters are developed for eigensystem parameter identification and state estimation from both analytical results and test data. Explicit formulations of these projection filters are derived using the pseudoinverse matrices of the controllabilty and observability matrices in the general sense. A global minimum optimization algorithm is developed to update the filter parameters by using the interval analysis method. Modal parameters can be identified and updated in the global sense within a specified region of parameters by passing the experimental data through the projection filters. For illustration of this new approach, a numerical example is shown by using a one-dimensional global optimization algorithm to estimate modal frequencies and damping.

Huang, Jen-Kuang↗
NASA NTRS1987

Mathematical correlation of modal-parameter-identification methods via system-realization theory

A unified approach is introduced using system-realization theory to derive and correlate modal-parameter-identification methods for flexible structures. Several different time-domain methods are analyzed and treated. A basic mathematical foundation is presented which provides insight into the field of modal-parameter identification for comparison and evaluation. The relation among various existing methods is established and discussed. This report serves as a starting point to stimulate additional research toward the unification of the many possible approaches for modal-parameter identification.

Juang, Jer-Nan↗
NASA NTRS1987

A comparative overview of modal testing and system identification for control of structures

This paper presents a comparative overview of the disciplines of modal testing used in structural engineering and system identification used in control theory. A list of representative references from both areas is given and the basic methods are briefly described. Recent progress on the interaction of modal testing and control disciplines is discussed. It is concluded that combined efforts of researchers in both disciplines are required for unification of modal testing and system identification methods for control of flexible structures.

Juang, Jer-Nan↗
NASA NTRS1986

Studies of modal identification performance using hybrid data

Modal identification accuracy can be affected significantly in practice by high modal density and nonlinearities. It may be difficult to determine the true number of modes, and many of the identified mode shapes may be questionable. Results can vary considerably using different analysis techniques. This paper introduces a new method for studying modal identification performance under such circumstances. A difficult set of test data from an erectable truss structure was modified numerically by adding two artificial modes with known parameters. These 'hybrid data' were then analyzed with the Polyreference technique and the Eigensystem Realization Algorithm (ERA). Identification performance is studied by comparing the identified modal parameters for the artificial modes with their known values.

Pappa, Richard S.↗